Hi guys,
I've had some great help lately with my Turbo and I decided I'd try to keep track of the threads that I got good advice from. I've also tried searching the old and the new forums for Genuine Turbo specific info but often the search results are too many so the results don't display. This week I decided to manually look through all the threads in the Sigma sections and came up with the below list of threads I found interesting. I decided to post it up in the hope that it might come in handy for others down the track.......
Thread summary: At higher revs, car would just die
Link to thread: http://www.sigma-galant.com/archive/mod ... 63&start=0
Thread summary: Need a new factory Turbo Air Filter
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=5103
Thread summary: Standard wastegate size
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=4860
Thread summary: Sigma Turbo blowing blue smoke
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=4413
Thread summary: Standard carby idling erratic and too high
Link to thread: http://www.sigma-galant.com/archive/mod ... 46&start=0
Thread summary: Sigma Turbo roof lining stuffed
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=4091
Thread summary: Adjusting mixture on CD175 Carby
Link to thread: http://www.sigma-galant.com/archive/mod ... sc&start=0
Thread summary: How to adjust boost on Sigma Turbo
Link to thread: http://www.sigma-galant.com/archive/mod ... sc&start=0
Thread summary: Turbo dizzy info
Link to thread: http://www.sigma-galant.com/archive/mod ... 53&start=0
Thread summary: Oil cap blowing off when revving turbo motor
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=6250
Thread summary: Intercooler with Carby Turbo setup
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=6031
Thread summary: Replacing the Timing chain on a GH Turbo 2 Litre motor
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=2859
Thread summary: Raplacing the "O" ring between Standard Turbo and CD175 Carby manifold
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=3468
Thread summary: GH Turbo pin stripe and paint codes
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=3263
Thread summary: Sigma Turbo wheel centre caps
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=2232
Thread summary: Factory Turbo A/R specs
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=1725
Thread summary: Sigma Turbo Ignition Timing
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=3532
Thread summary: Turbo Oil return
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=23&t=181
Thread summary: What fuel to use in Sigma Turbo
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=3642
Thread summary: Factory Turbo Aircon
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=3706
Thread summary: Turbo dump pipe not sealing
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=30&t=3694
Thread summary: Boost restricting to 12PSI - possible causes
Link to thread: http://www.sigma-galant.com/viewtopic.p ... 961#p30961
Thread summary: Is my Sigma Turbo genuine?
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=4481
Thread summary: Sigma Turbo won't start
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=4596
Thread summary: Factory Turbo heat shield - how to mount the top one
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=4707
Thread summary: Stock Sigma Turbo running really bad cold
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=4788
Thread summary: Sigma Turbo Carby spacer needed
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=4787
Thread summary: Sigma Turbo badge colours
Link to thread: http://www.sigma-galant.com/viewtopic.p ... 172#p40172
Thread summary: Bought an original Sigma Turbo, looking for advice on injection and other things
Link to thread: http://www.sigma-galant.com/viewtopic.p ... 85&start=0
Thread summary: What Turbo to buy for 2.6 Sigma Turbo
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=5660
Thread summary: Was there ever a 2.6T made
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=3303
Thread summary: Sigma Turbo goes classic
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=6434
Thread summary: Sigma Turbo manifold on 2.6
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=5973
Thread summary: What Turbo for 2.6T
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=5660
Thread summary: Info wanted on standard CD175 carbies
Link to thread: http://www.sigma-galant.com/viewtopic.p ... 211#p61211
Thread summary: CD175 leaking out of inlet
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=7922
Thread summary: Factory Turbo rebuild kit wanted
Link to thread: http://www.sigma-galant.com/viewtopic.php?f=24&t=7259
Sigma Turbo specific info - links to past threads
Sigma Turbo specific info - links to past threads
Last edited by Anonymous on Sun Sep 18, 2011 4:47 pm, edited 15 times in total.
- TUFSIG
- Sigma-Galant Police (Global Mod)
- Posts: 3185
- Joined: Mon Mar 16, 2009 10:34 pm
- Location: Melbourne, Vic
Re: Sigma Turbo specific info - links to past threads
great work there mate
i made it a sticky so it will be at the top for people to see
cheers
i made it a sticky so it will be at the top for people to see
cheers
TUFSIG
Boost Is the Only Way
1984 GK Sigma GSR, 2.6 EFI Turbo
1992 Aus Delivered 3000GT Twin Turbo
1984 GK Sigma GSR Stocka
Boost Is the Only Way
1984 GK Sigma GSR, 2.6 EFI Turbo
1992 Aus Delivered 3000GT Twin Turbo
1984 GK Sigma GSR Stocka
Re: Sigma Turbo specific info - links to past threads
Cool! I'll add to the post when new threads come up too so it will hopefully be a good resource
-
- Posts: 30
- Joined: Sun Feb 21, 2010 6:45 pm
- Location: perth WA
Re: Sigma Turbo specific info - links to past threads
Thanks mate answers to alot of my questions
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Sigma Turbo specific info - links to past threads
BTW i ended up using the 2450 K&N filter, was a direct replacementShifta wrote:Thread summary: Need a new factory Turbo Air Filter
Link to thread: http://www.sigma-galant.com/archive/mod ... pic&t=5103
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- ralliartsigma
- Posts: 46
- Joined: Wed Sep 16, 2009 8:37 pm
- Location: Tasmania
Re: Sigma Turbo specific info - links to past threads
Hey guys,
Ive done my best searching through the above links and past threads but still no luck, Im in the process of putting my 2lt turbo motor (Standard with the exception of a SU carby, 50-60 thou oversize and balance shafts removed) together but im thinking of going the Electric fuel pump option, what sort of pressure/flow should i be looking at? (Ive got a rising rate reg if this makes any difference)
Any help or even a point in the right direction would be great!
Cheers
Trent
Ive done my best searching through the above links and past threads but still no luck, Im in the process of putting my 2lt turbo motor (Standard with the exception of a SU carby, 50-60 thou oversize and balance shafts removed) together but im thinking of going the Electric fuel pump option, what sort of pressure/flow should i be looking at? (Ive got a rising rate reg if this makes any difference)
Any help or even a point in the right direction would be great!
Cheers
Trent
'83 GJ Wagon my baby, but sadly not driven enough.
'94 MJ Triton my daily in the colder months.
'81 GH Turbo No. 105 (WIP)
'81 GH Turbo No. 017
'94 MJ Triton my daily in the colder months.
'81 GH Turbo No. 105 (WIP)
'81 GH Turbo No. 017
Re: Sigma Turbo specific info - links to past threads
Hi mate,
Check out the thread here : http://www.sigma-galant.com/viewtopic.php?f=24&t=4596. I had a heap of problems getting my standard SU running and the guys help me on page 2 - basically around 3-4PSI running the SU. As you mention you aren't running that, maybe start a new thread in the Sigma section and tell the guys what you have. I'll then link your thread in this one as this one is pretty much for reference and not posting
Check out the thread here : http://www.sigma-galant.com/viewtopic.php?f=24&t=4596. I had a heap of problems getting my standard SU running and the guys help me on page 2 - basically around 3-4PSI running the SU. As you mention you aren't running that, maybe start a new thread in the Sigma section and tell the guys what you have. I'll then link your thread in this one as this one is pretty much for reference and not posting
Re: Sigma Turbo specific info - links to past threads
Looks like any of the sticky links above with "Archive" in them don't work anymore. The others are still good, so hopefully might still be useful