Mini spool for sigma BW
Mini spool for sigma BW
HI all , can one purchase a mini spool for a sigma borgwarner?
Jake
Jake
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: Mini spool for sigma BW
Very much doubt it mate.
You could get one made, but it wont be cheap.
Most people just weld the Spider gears
You could get one made, but it wont be cheap.
Most people just weld the Spider gears
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Mini spool for sigma BW
or worth your whileDanTurboLancer wrote:Very much doubt it mate.
You could get one made, but it wont be cheap.
the std bw is a very fragile thing, radio control cars have stronger diffs
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: Mini spool for sigma BW
hi there mate,i purchased one not too long ago off ebay..i also bought gears off the same bloke...
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: Mini spool for sigma BW
Wow well there you go!
How much are they asking ISKA8?
How much are they asking ISKA8?
and if you give it a hard time, shearing the axles inside the diff centre, and putting metal shaving all through your bearings will be your next concern.amgis_obrut wrote: the std bw is a very fragile thing, radio control cars have stronger diffs
Re: Mini spool for sigma BW
i really cant remember who but,if you just type in gears for any car on ebay a name like victor or vicgears in sydney should come up??dat would be the guy?maybe even if you check my build thread i might have his name in there??not too sure though..alot of people kept telling me "WHY" a sigma diff,they will blow?but why not!!easy to get and easy to fit..might upgrade one day ....hope you find what your after mate..im running 4:11s anf a full spool cost me Ii think approx $250 (gears) $180 (spool)..
best of luck
best of luck
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Mini spool for sigma BW
vicmelboz
whats the spline count in that spool ??
whats the spline count in that spool ??
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: Mini spool for sigma BW
i really dont remember..amgis_obrut wrote:vicmelboz
thats the one bro..
whats the spline count in that spool ??
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Mini spool for sigma BW
This was the reply i got from the Ebay Gear supplier vicmelboz
OK, the sigma runs an M70 with 23 spline axles. I don't know of anyone who makes the 23 spline spool. I'm happy to supply a welded unit for $30 which would do the same thing as a spool. Cheers, Glenn
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: Mini spool for sigma BW
hmm well my diff may have that welded one in it mate...not too sure though, but i got it from vicmelboz..amgis_obrut wrote:This was the reply i got from the Ebay Gear supplier vicmelboz
OK, the sigma runs an M70 with 23 spline axles. I don't know of anyone who makes the 23 spline spool. I'm happy to supply a welded unit for $30 which would do the same thing as a spool. Cheers, Glenn
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Mini spool for sigma BW
well you'd want to get on to him then as he's charged you an extra $150 over what he's quoted me
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: Mini spool for sigma BW
i spoke to my mate that put the diff in,he organised the spool with him.he says that 100% that i got the lucky last spool he had somewere in his shop..he remembered he had one but couldnt figure out were he put it..few days later he found it behind some shit at work??my mate clarified that it was a genuine spool not welded..whoooh lucky me!!
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: Mini spool for sigma BW
I dunno, that vicmelboz bloke seems to think there was never any made for a 23 spline BW so either him or your mate is pissing in your pocket
In the last 20 years that I have been playing with cars like Cortinas that also had a 23 spline BW i have never seen one either and believe me i have looked (theres 23 spline spools for a holden banjo) thats why i contacted that ebay seller as i would love to get my hands on one
sorry to say though I think somebody has stooged you
In the last 20 years that I have been playing with cars like Cortinas that also had a 23 spline BW i have never seen one either and believe me i have looked (theres 23 spline spools for a holden banjo) thats why i contacted that ebay seller as i would love to get my hands on one
sorry to say though I think somebody has stooged you
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: Mini spool for sigma BW
honestly bro,im speakin for myself.im really not sure about it.all i know is my car revs like a muthaf@#kr and churps everytime i take a corner ..i appreciate the info mate and hope you can score one.cheers!amgis_obrut wrote:I dunno, that vicmelboz bloke seems to think there was never any made for a 23 spline BW so either him or your mate is pissing in your pocket
In the last 20 years that I have been playing with cars like Cortinas that also had a 23 spline BW i have never seen one either and believe me i have looked (theres 23 spline spools for a holden banjo) thats why i contacted that ebay seller as i would love to get my hands on one
sorry to say though I think somebody has stooged you
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
Re: Mini spool for sigma BW
amgis_obrut wrote:or worth your whileDanTurboLancer wrote:Very much doubt it mate.
You could get one made, but it wont be cheap.
the std bw is a very fragile thing, radio control cars have stronger diffs
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
Re: Mini spool for sigma BW
I know this is way late but there actually is a mini spool for the sigma (well was) its a 23 spline mini spool from a company called romac they dont make them anymore but there should be some floating around somewhere , im searching high and low if anyone does happen to track them down let me know . but they defiantly do exist .
Re: Mini spool for sigma BW
man i knew that glenn at vicmelboz wasnt talking shit when he told me he had one...hmmm
im not going to say i told u so boys...lol
im not going to say i told u so boys...lol
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310
Re: Mini spool for sigma BW
yeah i contacted him about it the other day he gave me all the details about it i sent romac a email about it and they just replied with details of one of there guys who might be able to help out ill be giving him a call tomorrow and hopefully can track 1 down
Re: Mini spool for sigma BW
good luck,hope u find one mate...
1984 SIGMA GK GSR (was EFI TURBO 10psi 194.0kw atw ) N/A head & cam
*1991 VN SS 5spd...HI COMP HEAD & CAM
2004 MITSUBISHI EXPRESS BIG RIG MOBILE DETAILING 0414017857!
MY NEW TOY F6310