...EVL 076...
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
...EVL 076...
...........
Last edited by EVL076 on Mon Jun 21, 2010 12:28 am, edited 1 time in total.
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: ...EVL 076...
awesome, sounds like youve been doing plenty!
And definetly on the right path with future stuff!
Interesting to hear you have the same problem with boost drop off in top end of revs, with the factory set up, i had to have the rear housing machined slightly larger and bigger wheel and i started thinking i was running out of fuel or something...
There is a guy from newcastle running a sigma at Eastern Creek I think number plates SIG26T
And he has a good strong set up similar to yours, but im not sure about the NOS and he is deep in the 11s....
Have fun!!
And definetly on the right path with future stuff!
Interesting to hear you have the same problem with boost drop off in top end of revs, with the factory set up, i had to have the rear housing machined slightly larger and bigger wheel and i started thinking i was running out of fuel or something...
There is a guy from newcastle running a sigma at Eastern Creek I think number plates SIG26T
And he has a good strong set up similar to yours, but im not sure about the NOS and he is deep in the 11s....
Have fun!!
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: ...EVL 076...
............
Last edited by EVL076 on Mon Jun 21, 2010 12:29 am, edited 1 time in total.
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: ...EVL 076...
.............
Last edited by EVL076 on Mon Jun 21, 2010 12:29 am, edited 1 time in total.
Re: ...EVL 076...
Interested in learning how you mated the factory turbo inlet manifold to the magna M6 head. I thought they had different stud patterns. ;) The way its done sure looks sweet !
I'm here for a good time, not a long time !
GJ Rally Sigma, 2.6 Haltech MPI [SOLD]
GJ Rally Sigma, 2.6 Haltech MPI [SOLD]
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: ...EVL 076...
.......
Last edited by EVL076 on Mon Jun 21, 2010 12:29 am, edited 1 time in total.
Re: ...EVL 076...
Thanks LG, haven't seen it done before, but very, very neat. Congrats to whoever did the job.
I'm here for a good time, not a long time !
GJ Rally Sigma, 2.6 Haltech MPI [SOLD]
GJ Rally Sigma, 2.6 Haltech MPI [SOLD]
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: ...EVL 076...
..........
Last edited by EVL076 on Mon Jun 21, 2010 12:29 am, edited 1 time in total.
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: ...EVL 076...
hey mat looks like your getting lots of progress done. cant wait to see it finished ;)
BUILT NOT BROUGHT BY ALGIE.
Re: ...EVL 076...
+1TUFSIG wrote:asif not just keep it all black