webby wrote:You won't find nice rims in the factory offset. The Superlites are +4 right? Provided they don't stick out of the guards you'll be fine
You'll want to go closer to neutral offset anyway, a 13x7 +25 or whatever the stock offset is would hit the strut
i was keen on superlites but now im thinking sumthing a little more jap style wiv deep dish? or maby just go wiv the bathurst style mags polishet and painted white (like daves)
anyway tomorow i will start making phone calls to diffrent workshops to ask about my motor and get sum quotes on full reco on my head and bottem end ballencing.. witch leads to my next QUESTION wat exactly is invloved in ballencing a motor? i take it thay just grind a bit here and there of the crank and rods? shood i fit my new pistons,rings and berrings first?
and i no i mussent forget to do the welsh plugs too!
My car: Colt/Galant AI standed. going AII GS speks!
after sum sanding the cam berring bits lookt ok so i thort wile im still chasing valves and springs i wood get away with throwing it back to gether wiv my #2 cam and take it for a spin....well i got it running ok seem to be fine! so i went and put rego on her then cum home started it up again and it was running like a dog .......well after a inspection the oil is like milk so the head gasket must hav let go... and to piss me off even more i had it bookt it for a full tune and ballence of the carby today...
My car: Colt/Galant AI standed. going AII GS speks!
got my head back today after beeing workt on for the last few days at richards engine service.. it had a slight warp in it and had to be shaved down a bit to fix but all good now.. im still chasing a good torque wrench to fit it with (cant really aford one this week ) but it shood all be running again very soon.. i hav had my extractors ceramic coated and i wrapt them with heat tape and clear coated them when finished now thay look great here is a pic of the head..
and the extractors
My car: Colt/Galant AI standed. going AII GS speks!
This is looking REALLY good
When you get the DCOEs set up, I'd LOVE to know what the jetting/air correction and so on is
(I have a pair waiting to go on my GA/4G32 and need a good starting point)
T.
The highest reward for a man's toil is not what he gets for it but who he becomes by it.
John Ruskin
Looking good, but I have to ask a question, why is your engine bay painted blue? Are you going to respray the whole car blue? (just for the record, I went back to the first page to look for an answer but couldn't find one. It's probably there, but I missed it).
BTW, any update on rims?
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Same general rules would apply to Dellorto & Mikuni-Solex sidedraughts as well, I would imagine (I'll know for sure when the jets I have ordered for my M-S 40s arrive in the mail )
75wagon wrote:Looking good, but I have to ask a question, why is your engine bay painted blue? Are you going to respray the whole car blue? (just for the record, I went back to the first page to look for an answer but couldn't find one. It's probably there, but I missed it).
BTW, any update on rims?
Dave...
a few years ago i painted it with machinery grey coz the old paint was falling off.. lol
and no rims yet.. been spending to much cash on motorbikes at the moment (just got a ktm )
My car: Colt/Galant AI standed. going AII GS speks!
havent done much lately.. i installed a crane cams ignition set up now she runs much better but still needs a tune.. and yea i still got spairs Nat881..
My car: Colt/Galant AI standed. going AII GS speks!
colta51 wrote:instaled tacho dash to.. after sum mucking around it all works great even the clock!
Did you have any trouble getting a good tight fit with it ? Mine doesn't seem to clip in quite as tightly at the top as the stock dash does.
I've discovered that the tach in mine seems to read a bit low, also ..... seems to be a % thing, as the error gets greater as revs increase. Will have to get it checked/calibrated I think (looks like there is an adjustment screw on the back)
seems to fit good at the top but the bottem is slightly off.. think my tacho is reading pretty good but wont be suprised if i find its a bit out the more the revs go up... bit like the speedo too.
My car: Colt/Galant AI standed. going AII GS speks!
I fitted a scorpion accel pedal in my GD- was a straight nut and bolt swap. Only needed to bend the upper half of the pedal arm a little to take some slack off the cable. Should be the same story for you.