LC Lancer hatch. AKA "Larry"
LC Lancer hatch. AKA "Larry"
No idea how to move the thread, so there's the intro.. http://www.sigma-galant.com/viewtopic.php?f=46&t=6018
Will slowly update over the next couple of months. Plans are restore/tidy up to factory with 14" sigma steelies, 2.6, weber, exhaust etc. Just enough to harass some bogans in Commonwhore's...
First thing was to remove those spotlights and swap the rear bumper to a chrome one..
Before
After
Note the random grill thats been cut in the middle to fit and held in with cable ties
New bumper needs a little work but still looks a lot better..
Checked the oil, water and air filter I looked like I had spent all day working on it. Plenty of built up oil and shit. Half cleaned now, got to buy about six cans of degreaser lol. Good improvment though.. Worry about that after oil changes and stuff are done...
Anyone know what these seats are out of? Still on the factory slides etc.
Will slowly update over the next couple of months. Plans are restore/tidy up to factory with 14" sigma steelies, 2.6, weber, exhaust etc. Just enough to harass some bogans in Commonwhore's...
First thing was to remove those spotlights and swap the rear bumper to a chrome one..
Before
After
Note the random grill thats been cut in the middle to fit and held in with cable ties
New bumper needs a little work but still looks a lot better..
Checked the oil, water and air filter I looked like I had spent all day working on it. Plenty of built up oil and shit. Half cleaned now, got to buy about six cans of degreaser lol. Good improvment though.. Worry about that after oil changes and stuff are done...
Anyone know what these seats are out of? Still on the factory slides etc.
Re: LC Lancer hatch. AKA "Larry"
"Plans are restore/tidy up to factory with 14" sigma steelies, 2.6, weber, exhaust etc."
Are they now????
Are they now????
Re: LC Lancer hatch. AKA "Larry"
I think that illness has gone to your head.. We talked about it the other day..
Re: LC Lancer hatch. AKA "Larry"
I actually prefer the black bumpers on the LC's.
Do you have a chrome front one to put on it as well?
Dave...
Do you have a chrome front one to put on it as well?
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: LC Lancer hatch. AKA "Larry"
Ummm.. Hope so, not too sure though, will have to raid the shed. I don't think the big squared bumpers suit the shape of the car, stick out too far if you look at the car from the side, just my opinion though...
Re: LC Lancer hatch. AKA "Larry"
I've had 2 LB hatches and now 2 LC hatches.
The LB's have a much nicer look and more 'Old Skool' look about them.
The LC's have a more bulky and modern look about them.
In my opinion, to make an LC look good they need bold modern wheels and a bold solid colour. Be it white, orange, yellow or something like that.
I've tried to go for that look on mine. I think it works ok.
The paint is still as was when I bought it. There will be a change, but I have other projects to complete first.
I think I may add some stripes to the side of it, and possibly lose the black bonnet? But these are just thoughts atm... If the bonnet stays black I'm thinking of painting the front apron black too.
It will be de-badged and the bumpers straightened and repainted. I have to source some good rubber ends for them too. I'll remove the sill strips.
And I'd love to get some JDM side window louvres.
Here's my old LB
Please ignore the pink bits under the bonnet, it was 1994. Bright colours were in, and i wanted my car to stand out more at the 'Fast Fours and Rotaries Nationals'.
Here's a Celeste from Bangkok. It has the rear window louvres I'm after for mine.
Cool looking hatch anyway, so I thought you'd like to see it.
Dave...
The LB's have a much nicer look and more 'Old Skool' look about them.
The LC's have a more bulky and modern look about them.
In my opinion, to make an LC look good they need bold modern wheels and a bold solid colour. Be it white, orange, yellow or something like that.
I've tried to go for that look on mine. I think it works ok.
The paint is still as was when I bought it. There will be a change, but I have other projects to complete first.
I think I may add some stripes to the side of it, and possibly lose the black bonnet? But these are just thoughts atm... If the bonnet stays black I'm thinking of painting the front apron black too.
It will be de-badged and the bumpers straightened and repainted. I have to source some good rubber ends for them too. I'll remove the sill strips.
And I'd love to get some JDM side window louvres.
Here's my old LB
Please ignore the pink bits under the bonnet, it was 1994. Bright colours were in, and i wanted my car to stand out more at the 'Fast Fours and Rotaries Nationals'.
Here's a Celeste from Bangkok. It has the rear window louvres I'm after for mine.
Cool looking hatch anyway, so I thought you'd like to see it.
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: LC Lancer hatch. AKA "Larry"
I don't mind the look of the front bumper on your orange hatch, looks good actually. The one on ours is pretty rough. It's the back one I don't like, not sure if it looks weird, two different ones, although you can't see the front and the back of the car at the same time...
I wouldn't have noticed the pink bits under the bonnet if you didn't point them out.. Nice lol.
Pretty sure we'll be keeping the yellow, saves respraying the whole car.
I like the side mirrors on the orange one as well. Have a couple of them but they're both right hand ones If I can't find a left one, I might try a "minitruck" place or wherever those guys go to get things, Bound to have something round and polished there..
I wouldn't have noticed the pink bits under the bonnet if you didn't point them out.. Nice lol.
Pretty sure we'll be keeping the yellow, saves respraying the whole car.
I like the side mirrors on the orange one as well. Have a couple of them but they're both right hand ones If I can't find a left one, I might try a "minitruck" place or wherever those guys go to get things, Bound to have something round and polished there..
Re: LC Lancer hatch. AKA "Larry"
Are you sure the mirrors are both right ones. The one on Dave's orange lancer looks to be the factory style which are interchangeable from right to left. Just move the mirror angle. Otherwise the auto stores sell chromed plastic ones which are pretty similar. Or look for one from one of the valiant as one of the models had an identical mirror. The Aussie galants and lancers used a valiant mirror instead of the jap style front guard mirrors. Don't expect a really good one original to be cheap though.
'72 GB Galant Sedan nanna spec daily
'85 GN Sigma Wagon 4g63 SOHC Turbo almost ready for the road
'74 GC Galant Coupe long term project
'85 GN Sigma Wagon 4g63 SOHC Turbo almost ready for the road
'74 GC Galant Coupe long term project
- BlueThunder
- Posts: 339
- Joined: Thu Oct 14, 2010 2:18 am
- Location: Antwerp
Re: LC Lancer hatch. AKA "Larry"
Sweet! Looks almost like mine except for the rims and under the bonnet. I even have the same (worthless) mirror on the door (but on the left side of course) :p75wagon wrote: Here's my old LB
Dave...
The polished stainless steel strips under the doors will be put later on.
Do you still have anything for these LB's laying around Dave?
Cheers
Sven
Re: LC Lancer hatch. AKA "Larry"
If you're interested in them, I'm taking them off shortly to replace them with black ones. Unfortunately the mirrors are not a pair and the chrome is not in the best nick.si81gma wrote:I like the side mirrors on the orange one as well.
You can if you look from the sidesi81gma wrote:It's the back one I don't like, not sure if it looks weird, two different ones, although you can't see the front and the back of the car at the same time...
Have you got an LC grill?
We really need to meet up and talk...
BlueThunder wrote:Do you still have anything for these LB's laying around Dave?
I sold that LB in about 1996 or 97 (not sure).
At the same time I gave all of my parts away with the car. Including dead straight GB Galant bumpers
I put my quick twin carb motor from my old Pink GB in it and sold it to my best mate. He traded it in 1 month later and took half what he paid me for it. Then he threw all the other parts except for one motor down at the dump. The head of that one motor is now the head on my Wagon So at least not all of it went to waste.
I had a room under my Dads house full of Lancer hatch parts. I threw them all down the tip in about 1998
He wanted them gone.
Wish I had those parts now?
All I have left is an instrument panel and brake master cylinder and booster.
My favourite car of all time is my first Lancer Hatch. Was a gold/brown LB Hatch. The stories I have from that car still get told today.
I only have a handful of pics from it. It wasn't much to look at, but sometimes that's not what it's about is it?
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: LC Lancer hatch. AKA "Larry"
and it was all of 10pm lol,75wagon wrote: You can if you look from the side
Have you got an LC grill?
Dad has two I think, one for his (LC front on his LB) and one we're going to use on this one..
We should have this one rego'd in the next 4-6 weeks if we pull our fingers out, hopefully everyones keen for a cruise
We have a few pairs of doors and guards, but no spare bonnets or LC hatches
Re: LC Lancer hatch. AKA "Larry"
It seemed to me that the LB hatch physically fits the LC's but the hinges are different.
Is it possible to cut and weld the hinges so they bolt on??
oh and si81gma when are you next coming and working on larry with me?
Its kinda boring with no one to talk to
Is it possible to cut and weld the hinges so they bolt on??
oh and si81gma when are you next coming and working on larry with me?
Its kinda boring with no one to talk to
Re: LC Lancer hatch. AKA "Larry"
To Do List For Today:
Sand the replacement doors, mask up and prime.
Same with front apron panel.
Possibly go over the front guards and remove any rust that i can.
Sand the replacement doors, mask up and prime.
Same with front apron panel.
Possibly go over the front guards and remove any rust that i can.
Re: LC Lancer hatch. AKA "Larry"
make that just the doors.... previously repaired by the lord of the bog.. bugger.
All good now though... ish
All good now though... ish
Re: LC Lancer hatch. AKA "Larry"
Just found out that pop may have a hatch for larry... winner... i hope.
Progress has been made, larry will be ready in no time.... i will be too exhausted to drive him though.
Progress has been made, larry will be ready in no time.... i will be too exhausted to drive him though.
Re: LC Lancer hatch. AKA "Larry"
Who's car actually is this?
si85gma, did you end up selling your Sigma?
If not put the wheels off it on the hatch?
Dave...
si85gma, did you end up selling your Sigma?
If not put the wheels off it on the hatch?
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: LC Lancer hatch. AKA "Larry"
My dad bought larry as a joint project for myself and si81gma.
Sold my sigma but i've been told its up for sale again in north wyong.
Somehow i think 18's are too big for a car that originally wore 13" shoes...
I think we're sticking to steelies.... Sleeper style
Sold my sigma but i've been told its up for sale again in north wyong.
Somehow i think 18's are too big for a car that originally wore 13" shoes...
I think we're sticking to steelies.... Sleeper style
Re: LC Lancer hatch. AKA "Larry"
Doors are done. YAY! just need colour
Front apron nearly complete but looking good.
Next up front guards and bonnet.
Front apron nearly complete but looking good.
Next up front guards and bonnet.
Re: LC Lancer hatch. AKA "Larry"
Pics?
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: LC Lancer hatch. AKA "Larry"
Where did my last post go?? someone stole it..
Pictures coming tomorrow
Pictures coming tomorrow
Re: LC Lancer hatch. AKA "Larry"
Most likely gonna have to change the drivers side front guard...
Its got little rust holes in it and one area has about 5 or 6 kilos of bog in it.
Lucky there is a couple of spares.
Its got little rust holes in it and one area has about 5 or 6 kilos of bog in it.
Lucky there is a couple of spares.
Re: LC Lancer hatch. AKA "Larry"
Pics up this arvo....hopefully
Re: LC Lancer hatch. AKA "Larry"
Nothing worth photographing.
Might make progress one day when i get some help.
Two hands just aren't enough
RHF Guard changed though.... its now red.
Might make progress one day when i get some help.
Two hands just aren't enough
RHF Guard changed though.... its now red.
Re: LC Lancer hatch. AKA "Larry"
Little bit of progress, bog, damage and rust to fix...
I think the hatch is stuffed
Nice layer of bog throughout...
Thought it was a decent looking guard, until the grinder came out
New guard's on it now. Who knows what we'll find next...
I think the hatch is stuffed
Nice layer of bog throughout...
Thought it was a decent looking guard, until the grinder came out
New guard's on it now. Who knows what we'll find next...
Re: LC Lancer hatch. AKA "Larry"
i definately have an lc grill or two. i'm in sydney and you can have one. just let me know when your coming to get it if you still need it
Re: LC Lancer hatch. AKA "Larry"
Hi
I guys, I have a LC that has seen better days, the shell it self has just about rusted away, but has a front grille all glass and all trim are there as are the original seat and interior trim. Seat would need to be re upholstered but are original. Motor gear box and diff are all there carby dissy radiator etc but has not run for a number of years so can't really tell condition (original 1600). Need to get rid of it but would hate to see parts go to waste if someone wanted them. Contact me on hopperk@dodo.com.au if you are interested.
I guys, I have a LC that has seen better days, the shell it self has just about rusted away, but has a front grille all glass and all trim are there as are the original seat and interior trim. Seat would need to be re upholstered but are original. Motor gear box and diff are all there carby dissy radiator etc but has not run for a number of years so can't really tell condition (original 1600). Need to get rid of it but would hate to see parts go to waste if someone wanted them. Contact me on hopperk@dodo.com.au if you are interested.
-
- Posts: 22
- Joined: Sat Jan 15, 2011 6:41 pm
Re: LC Lancer hatch. AKA "Larry"
cool lancer man..i love specially the side and rear louvers. I remember mine but now its in the junk.75wagon wrote:I've had 2 LB hatches and now 2 LC hatches.
The LB's have a much nicer look and more 'Old Skool' look about them.
The LC's have a more bulky and modern look about them.
In my opinion, to make an LC look good they need bold modern wheels and a bold solid colour. Be it white, orange, yellow or something like that.
I've tried to go for that look on mine. I think it works ok.
The paint is still as was when I bought it. There will be a change, but I have other projects to complete first.
I think I may add some stripes to the side of it, and possibly lose the black bonnet? But these are just thoughts atm... If the bonnet stays black I'm thinking of painting the front apron black too.
It will be de-badged and the bumpers straightened and repainted. I have to source some good rubber ends for them too. I'll remove the sill strips.
And I'd love to get some JDM side window louvres.
Here's my old LB
Please ignore the pink bits under the bonnet, it was 1994. Bright colours were in, and i wanted my car to stand out more at the 'Fast Fours and Rotaries Nationals'.
Here's a Celeste from Bangkok. It has the rear window louver I'm after for mine.
Cool looking hatch anyway, so I thought you'd like to see it.
Dave...
Re: LC Lancer hatch. AKA "Larry"
Hey everyone, I just purchased this lancer of my mate. Has been just sitting in the garage for about 9 years since the posts stopped on here! Have got it running again. Just planning to give it a sand back and a new coat of paint. And redo the interior as it's gross haha. If anyone has a lc lancer grill spare somewhere around Newcastle or central coast It would be much appreciated. Also willing to go a bit further if need be. Cheers, Lucas