It's got a 2.6L sigma engine, twin 48mm DCOE webers, (Also a custom made Fuel Injection set-up, going to be tested when it's 100% finished), 4:1 Extractors to a 2 1/4" side exhaust.
Engine has been run-in on a rolling road, but hasn't seen the track yet. Should be out late next year some time.
Alot more stuff but I'm sure you'd rather see pics.
No Front Spoiler at the moment, Mould is ready to go, Just gotta find some time.
![Image](http://img375.imageshack.us/img375/6584/snc00102s.jpg)
![Image](http://img59.imageshack.us/img59/9166/snc00107e.jpg)
![Image](http://img688.imageshack.us/img688/8977/snc00108on.jpg)
Custom made Flares
![happy :)](./images/smilies/msn_happy.gif)
![Image](http://img6.imageshack.us/img6/9648/snc00105r.jpg)
![Image](http://img3.imageshack.us/img3/8923/snc00106y.jpg)
![Image](http://img190.imageshack.us/img190/72/snc00112fw.jpg)
Got Camber?
![Image](http://img180.imageshack.us/img180/8444/snc00115d.jpg)
![Image](http://img189.imageshack.us/img189/8409/snc00109ra.jpg)
![Image](http://img46.imageshack.us/img46/6765/snc00110c.jpg)
![Image](http://img443.imageshack.us/img443/386/snc00111m.jpg)
![Image](http://img543.imageshack.us/img543/1287/snc00116g.jpg)
![Image](http://img69.imageshack.us/img69/1152/snc00117o.jpg)
Twin 48mm DCOE's
![Image](http://img193.imageshack.us/img193/7856/snc00118b.jpg)
![Image](http://img826.imageshack.us/img826/3803/snc00120.jpg)
![Image](http://img80.imageshack.us/img80/2811/snc00121d.jpg)
![Image](http://img59.imageshack.us/img59/4992/snc00123q.jpg)
![Image](http://img40.imageshack.us/img40/5710/snc00125h.jpg)
![Image](http://img825.imageshack.us/img825/7074/snc00126h.jpg)
![Image](http://img192.imageshack.us/img192/6814/snc00128c.jpg)
![Image](http://img3.imageshack.us/img3/892/snc00129d.jpg)
To adjust Brake Bias
![Image](http://img683.imageshack.us/img683/163/snc00134x.jpg)
![Image](http://img525.imageshack.us/img525/8885/snc00137sa.jpg)
And if you're wondering, My last name is Footner, all modifications were done by my dad, and over 90% were on a manual Lathe or Mill.