hey guys,
the diff in my gh is clunking badly... what other vehicles can i swap the centre out of?
would a ge diff fit in my gh?
diffs
Re: diffs
you need to know your diff ratio, how many bolts is has, front or rear center (jap or BW) and then find another sigma with the same ratio, botl pattern and model as urs. there are so many variations
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
Re: diffs
not fussed about ratios...
so how do you tell b/w from jap diffs? is there much differences or among jap diffs or among b/w diffs or are the differences only between jap and b/w?
centres aside... can i get the housing out of any GE, GH or GJ onwards wagon and bolt it in?
any helpfull hints to point me in the right direction?
cheers,
rob
so how do you tell b/w from jap diffs? is there much differences or among jap diffs or among b/w diffs or are the differences only between jap and b/w?
centres aside... can i get the housing out of any GE, GH or GJ onwards wagon and bolt it in?
any helpfull hints to point me in the right direction?
cheers,
rob
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: diffs
thats as far as my knowlege goes sorry
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
-
- Posts: 1689
- Joined: Sun Mar 22, 2009 4:12 pm
- Location: Sydney
Re: diffs
There are basically 3 types of Jap diff that will fit the GE/GH Sigmas.
2 are Jap , 1 is BW.
If the spring mounts are on the diff, it won't fit a GE, GH or Wagon.
The 2 types of Jap diff that will fit are from the GE and GH Scorpions.
The GH diff is preferable because the axles are thicker.
If you "WERE" using a BW diff and going to a JAP diff, you will need the diff, hand brake cable and all the control arms from the Scorp diff to be able to fit it.
Also, the tailshaft flange "MAY" be different.
The GH BW diff.
The GH Jap diff.
Cheers.
2 are Jap , 1 is BW.
If the spring mounts are on the diff, it won't fit a GE, GH or Wagon.
The 2 types of Jap diff that will fit are from the GE and GH Scorpions.
The GH diff is preferable because the axles are thicker.
If you "WERE" using a BW diff and going to a JAP diff, you will need the diff, hand brake cable and all the control arms from the Scorp diff to be able to fit it.
Also, the tailshaft flange "MAY" be different.
The GH BW diff.
The GH Jap diff.
Cheers.
Last edited by Superscan811 on Sat Jul 24, 2010 11:05 pm, edited 1 time in total.
Re: diffs
are ge and gh b/w diffs the same?
im looking at a ge sedan for a donor... will i be swapping the centres or the housings?
im looking at a ge sedan for a donor... will i be swapping the centres or the housings?
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
-
- Posts: 1689
- Joined: Sun Mar 22, 2009 4:12 pm
- Location: Sydney
Re: diffs
They have the same mounting points and will bolt straight in.rob020 wrote:are ge and gh b/w diffs the same?
If the spring mount IS NOT on the diff, it WILL fit a GE or GH.
I don't know whether the axles or centers are the same but I would guess they are.
I believe the GE Scorpion Jap diff centers are probably leftovers from the pre '78 lancers and galants but I would guess they realized they weren't strong enough when pushing a vehicle with a 2.6L astron, especially if it weighs an extra 300kg when compared with the lancers.
Cheers.
-
- Posts: 166
- Joined: Mon Apr 06, 2009 2:33 am
- Location: Toowoomba QLD
Re: diffs
GJ wagon diff definitly fits GH sedan or wagon, I did one today, full swap.