Hi all, long time no post,
Just wondering if anyone has had any luck sourcing new Dished 4G52/G52B pistons recently?
The plan was to build at least one of my turbo motors back to factory spec I'm struggling to get hold of 2lt pistons.
Thanks in advance.
Factory turbo rebuild
- ralliartsigma
- Posts: 46
- Joined: Wed Sep 16, 2009 8:37 pm
- Location: Tasmania
Factory turbo rebuild
'83 GJ Wagon my baby, but sadly not driven enough.
'94 MJ Triton my daily in the colder months.
'81 GH Turbo No. 105 (WIP)
'81 GH Turbo No. 017
'94 MJ Triton my daily in the colder months.
'81 GH Turbo No. 105 (WIP)
'81 GH Turbo No. 017
Re: Factory turbo rebuild
Not sure if there is a flat top equivelant, but any reputable engine building shop will be able to mill out the top of the piston to be the dished equivelant (had to do it on my RVR when turbo pistons werent available they just dished NA pistons to same specs