So atm i a mtossing around the idea of a 12a turbo rotory conversion for my LC lancer and was wondering if anyone knows of any where i can get some information aobut this or anyone that has done this or knows someone that has done this,
basicly any info would be great guys
12a Conversion
Re: 12a Conversion
There will be something on the site about a rotary conversion - see what Mr Search can find for you http://www.sigma-galant.com/search.php Remember, the search function is your friend
Re: 12a Conversion
already have it turned up 2 results, someone else asking about a rotory conversion in a sigma and someone asking about a auto conversion
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: 12a Conversion
There was a guy who did a turbo 13b conversion with a GH about 10years ago......number plate was towie
From what i understand, theres some form of write up ort forum on the car.....that might have some info perhaps
From what i understand, theres some form of write up ort forum on the car.....that might have some info perhaps
Built with pride, Driven in anger
Re: 12a Conversion
I stripped a Galant sedan that had a 13B in it.
It had a 13B, Mazda 5 speed (sorry I don't know what model 5 speed) and Ford 9 Inch diff.
To pass engineering it had GH front struts, larger master cylinder (I think someone said it was from a Nissan Patrol), it still ran the factory 2 leaf rear springs (which astounded me) with Galant sedan rear drums fitted (again, this astounded me). But as I said it was engineered (although early 2000's or late 90's).
What else do you want to know?
I also found this: https://www.youtube.com/watch?v=Thh7WUgN4kk
Dave...
It had a 13B, Mazda 5 speed (sorry I don't know what model 5 speed) and Ford 9 Inch diff.
To pass engineering it had GH front struts, larger master cylinder (I think someone said it was from a Nissan Patrol), it still ran the factory 2 leaf rear springs (which astounded me) with Galant sedan rear drums fitted (again, this astounded me). But as I said it was engineered (although early 2000's or late 90's).
What else do you want to know?
I also found this: https://www.youtube.com/watch?v=Thh7WUgN4kk
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 12a Conversion
I will be doing a 13b conversion with one of my LC's but it will be a race car only and I have most of the bits I require.
You need.....
Custom engine mounts
Custom gearbox mounts
bigger raditor
oil cooler
different tailshaft
hydraulic clutch conversion
modified firewall for clutch fork
intercooler
surge tank and pumps
bigger fuel lines
upgraded brakes and diff
.......just to start with. I havent included computer, wiring, etc...... yet either.
Massive job and there is not a lot of room under the car for everything either. Will be good fun if you get it going and it will upset the purists!
You need.....
Custom engine mounts
Custom gearbox mounts
bigger raditor
oil cooler
different tailshaft
hydraulic clutch conversion
modified firewall for clutch fork
intercooler
surge tank and pumps
bigger fuel lines
upgraded brakes and diff
.......just to start with. I havent included computer, wiring, etc...... yet either.
Massive job and there is not a lot of room under the car for everything either. Will be good fun if you get it going and it will upset the purists!
Re: 12a Conversion
ive got a lancer with a rotary in it....let me know what you want pics of and ill see what I can do.....in the middle of painting the engine bay etc so its all out...if your not far away you could use my mounts as a mock up...copy them....
https://www.youtube.com/watch?v=x456taS ... ev-Kl2ESzg is a small video of it with the old motor in it...
https://www.youtube.com/watch?v=x456taS ... ev-Kl2ESzg is a small video of it with the old motor in it...
Mobile mechanic, cheap rates. Servicing, headgaskets, clutch & brake repairs etc...BRISBANE
http://brisbane.gumtree.com.au/c-Cars-V ... Z199141038
http://brisbane.gumtree.com.au/c-Cars-V ... Z199141038
Re: 12a Conversion
the tunnel will need to be modded if your using a supra gearbox, but (not 100%) if using mazda rotary box
Mobile mechanic, cheap rates. Servicing, headgaskets, clutch & brake repairs etc...BRISBANE
http://brisbane.gumtree.com.au/c-Cars-V ... Z199141038
http://brisbane.gumtree.com.au/c-Cars-V ... Z199141038