LB Lancer rim advice needed
-
- Posts: 8
- Joined: Thu Sep 13, 2012 1:19 pm
LB Lancer rim advice needed
Hi there, would anyone happen to know the stud pattern and offset for an LA-LC Lancer (I have an LB), as well as some suggestions for some good alloys? I've heard 13" cheviots look good...
Alternatively, I was thinking of getting my current ones powdercoated. Could someone help me ID them (see photo), and let me know thoughts on powdercoating? I'd like the same finish, and I've been quoted $75/rim in Perth.
Thanks in advance for your help!!
Alternatively, I was thinking of getting my current ones powdercoated. Could someone help me ID them (see photo), and let me know thoughts on powdercoating? I'd like the same finish, and I've been quoted $75/rim in Perth.
Thanks in advance for your help!!
Re: LB Lancer rim advice needed
Pcd (stud pattern) is 4x114.3
And offset for memory is +38? But I could be wrong there
And offset for memory is +38? But I could be wrong there
N/A ALL THE WAY
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: LB Lancer rim advice needed
They're Marina's from memory.....my dad had them on his old Falcon
Built with pride, Driven in anger
Re: LB Lancer rim advice needed
I thought these ones were called 'Turbines'?
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: LB Lancer rim advice needed
that maybe there official name 75....not too sure....i've only ever known them as Marinas
Built with pride, Driven in anger
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: LB Lancer rim advice needed
you may find that the marina name is just a nickname as they are by far most commonly found on boat trailers
Built with pride, Driven in anger
-
- Posts: 164
- Joined: Sun Jul 17, 2011 5:07 pm
Re: LB Lancer rim advice needed
I remember a mate had a set on his Escort van..he called them Speedy Turbines..they rusted quick.
-
- Posts: 8
- Joined: Thu Sep 13, 2012 1:19 pm
Re: LB Lancer rim advice needed
I think I will go with something different, probably not much point getting these repainted.
Could someone please help me ID the rims below? This is the kind of thing i would like to put on the Lancer (if not these specifically, something similar). My Lancer's white, I think these would look awesome.
Could someone please help me ID the rims below? This is the kind of thing i would like to put on the Lancer (if not these specifically, something similar). My Lancer's white, I think these would look awesome.
Re: LB Lancer rim advice needed
They look like the factory allow rims from an earlier model Corolla. They have been given an epic refinish and polish though.
Re: LB Lancer rim advice needed
I'll be selling some 13x7 roughly 0 offset polished jelly beans.. They look sweet on my lancer but I did roll my guards. It also sits about 4 inches let than stock
-
- Posts: 8
- Joined: Thu Sep 13, 2012 1:19 pm
Re: LB Lancer rim advice needed
Hi mate... They look sweet!! I'll probably go something like 14x6 or 14x5, but I could consider the 13s. How much will you be selling for? I like the wide look - mine currently looks like that. Is that the 0 offset that makes them sit out like that?
Re: LB Lancer rim advice needed
Yeah, negative offset means the wheel moves away from the car
I'd like around $450 with the tyres..
I'd like around $450 with the tyres..
-
- Posts: 48
- Joined: Tue Jun 04, 2013 7:58 pm
Re: LB Lancer rim advice needed
Ive got a set of 5 13inch cheviots on my lancer id sell. if your keen i can text message you some pics
- RuffDiamond
- Posts: 22
- Joined: Fri Oct 14, 2011 5:31 pm
Re: LB Lancer rim advice needed
My advice mate, Modgies or Hotwires. You can never go wrong with either of these two....
-
- Posts: 8
- Joined: Thu Sep 13, 2012 1:19 pm
Re: LB Lancer rim advice needed
Hi All... I know this is a really old thread, but I'm finally starting on the Lancer again. Just had carpet and exhaust done, and I'm putting in new steering this weekend.
Any chance the rims you guys were mentioning were still available? If there are any new suggestions please let me know.
I'll post up pics of the work in progress soon
Any chance the rims you guys were mentioning were still available? If there are any new suggestions please let me know.
I'll post up pics of the work in progress soon
Re: LB Lancer rim advice needed
Here's a thought?
http://www.sigma-galant.com/viewtopic.php?f=36&t=12341
http://www.sigma-galant.com/viewtopic.php?f=36&t=12341
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
-
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
-
- Posts: 8
- Joined: Thu Sep 13, 2012 1:19 pm
Re: LB Lancer rim advice needed
damn they're nice... but my lancer is white so probably wouldn't work
-
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
Re: LB Lancer rim advice needed
it doesn't cost much to repaint them even if you can't do it yourself