my rx ga galant project
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
my rx ga galant project
Just my lastest project I bought off a mate of mine. I will try to get some pics up soon. It is setup & engineered for a 13b...
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
-
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
Re: my rx ga galant project
Nice! Was this on eBay?
1972 GA GALANT/COLT, with a VR4 4G63T 151kw atw :-)
Re: my rx ga galant project
Looks good but I think someone left a wheelie bin on the bonnet!
Re: my rx ga galant project
bridge port will be good for non turbo, best port 4 turbo would be extended port, engine will last longer
with less problems
have a read
http://www.mazdarotary.net/porting.htm
with less problems
have a read
http://www.mazdarotary.net/porting.htm
= Lancer 1976 =
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
Re: my rx ga galant project
Thanx buddy, wasn't really into galants but they are growing on me...metry wrote:looks imac mate. congratulations on the buy
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
Re: my rx ga galant project
I will get a sticker for it 'no junk mail' lolA112H wrote:Looks good but I think someone left a wheelie bin on the bonnet!
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
Re: my rx ga galant project
Wouldn't have a clue, I asked him if he wanted to sell it, agreed on a price and pickedGLANT wrote:Nice! Was this on eBay?
it up
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
Re: my rx ga galant project
Thanks champ, I have owned a fair few rotors in the past, but never a galant.7thsin wrote:bridge port will be good for non turbo, best port 4 turbo would be extended port, engine will last longer
with less problems
have a read
http://www.mazdarotary.net/porting.htm
I'm thinking more a bridgeport.
One of my mates had a gd galant and told me the L300 diff just about went straight under. I am going to try one, if not, hilux it will be.
Re: my rx ga galant project
Hey mate
I think your inbox is full cant pm you
send me your email addy
I think your inbox is full cant pm you
send me your email addy
- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
Re: my rx ga galant project
Due to time constraints etc, looks like i will have to sell her...
What would she be worth?

What would she be worth?
Last edited by astron_on_boost on Wed Mar 21, 2012 9:36 am, edited 1 time in total.
- 77galantv6
- Posts: 845
- Joined: Mon Mar 23, 2009 8:10 pm
- Location: Newcastle, NSW
Re: my rx ga galant project
what stage is it at? any motor etc?
assuming no rego?
any rust?
are all the bits there to complete it?
These are all factors when it comes to the pricing....
assuming no rego?
any rust?
are all the bits there to complete it?
These are all factors when it comes to the pricing....
'77 Galant V6....
1977 Galant with Commodore V6 conversion.

1977 Galant with Commodore V6 conversion.

- astron_on_boost
- Posts: 50
- Joined: Mon Mar 23, 2009 9:48 pm
- Location: sydney
Re: my rx ga galant project
From what I can tell, there is no rust at all that I found, the car was.resprayed in ford xr8 purple which looks good, not fully show though but neat, the car has the rotary conversion done as the car was.running , registered and enginered with a 13b. It has no motor but has a gearbox, radiator, oil cooler, tailshaft etc but in unknown condition.
Last edited by astron_on_boost on Wed Mar 21, 2012 9:37 am, edited 1 time in total.
Re: my rx ga galant project
This sold on Ebay not that long ago didn't it?
I would imagine it will go for roughly the same price...
I would imagine it will go for roughly the same price...