my gb
Re: my gb
should look really nice mate with those new wheels on mate! going to run a slightly stretched tyre? love to see this thing slammed on those wheels lol.
Toyota Cressida 77,79'
Mitsubishi Starion Track Car 84'
Mitsubishi Starion Widebody 89'
My projects/cars.
Mitsubishi Starion Track Car 84'
Mitsubishi Starion Widebody 89'
My projects/cars.
Re: my gb
Picked these up last night (thanks Ben!)
(Edit!) forgot to leave this here
Left ones are 13x6.5
Right ones are 13x7
Plan is to restore them. Same colour, just highly polished and new paint
Going to be wrapped in 195/60r13 Nankang NS-2's
(Edit!) forgot to leave this here
Left ones are 13x6.5
Right ones are 13x7
Plan is to restore them. Same colour, just highly polished and new paint
Going to be wrapped in 195/60r13 Nankang NS-2's
N/A ALL THE WAY
Re: my gb
Yep still not 100% satisfied on the mags. Yet. I like the sporty look 15s give. So I'm hoping the lower profile tyre on these and a low car will fill those needs
Also! Got myself a set of gh struts. Discs are pretty rusty, but the casing is all I pretty much wanted
Question; Do 13s fit over the gh sigma brakes?
And what goes in the bottom of it? Where the 3 bolts are. There's nothing there but a dish and 3 holes for the bolts.
But plans for these are; coilover sleeve kit. Slotted rotors. And a good set of pads same as Jase
Also! Got myself a set of gh struts. Discs are pretty rusty, but the casing is all I pretty much wanted
Question; Do 13s fit over the gh sigma brakes?
And what goes in the bottom of it? Where the 3 bolts are. There's nothing there but a dish and 3 holes for the bolts.
But plans for these are; coilover sleeve kit. Slotted rotors. And a good set of pads same as Jase
N/A ALL THE WAY
Re: my gb
Tyres on order, pick up at 2 today
Pick up paint today
-pheonix yellow acrylic and the rest to do the job (reducer, tape, sandpaper etc)
Rust repair quote hopefully Sunday
Paint quote Sunday
Pick up gasket for the manifold so I can fit my carbs.
Shits going down! lol
Pick up paint today
-pheonix yellow acrylic and the rest to do the job (reducer, tape, sandpaper etc)
Rust repair quote hopefully Sunday
Paint quote Sunday
Pick up gasket for the manifold so I can fit my carbs.
Shits going down! lol
N/A ALL THE WAY
Re: my gb
Fit my new tyres up yesterday! Fit em up today (well, one anyway). Here's how the 6.5" fits
And! I did this!
Before (32/36 webber)
After! (twin sidedraught DHLA 40 dellorto's)
And... Clearance.
Pretty happy with it all haven't started it yet, no fuel and dead battery
And! I did this!
Before (32/36 webber)
After! (twin sidedraught DHLA 40 dellorto's)
And... Clearance.
Pretty happy with it all haven't started it yet, no fuel and dead battery
N/A ALL THE WAY
Re: my gb
thanks!
I have a mate coming tomorrow with a guard roller. Hope to get those tyres under em
A bloke was supposed to come today to get a start on the rust that's left. And once that's done, another bloke will paint it
After that, the windows are being done.
Then put it together. Then get it to a dyno
After all that... Roady and rego! hope to be done before Xmas
I have a mate coming tomorrow with a guard roller. Hope to get those tyres under em
A bloke was supposed to come today to get a start on the rust that's left. And once that's done, another bloke will paint it
After that, the windows are being done.
Then put it together. Then get it to a dyno
After all that... Roady and rego! hope to be done before Xmas
N/A ALL THE WAY
Re: my gb
Well! My goal today was to sort out all the little stuff that was left after the twin carb conversion.
Done! took it for its first drive around the yard in over a year
Here's a vid. She's running very rough and it was crammed in my shed, so the air coming from the noise was echoing straight into my face. So it gassed me out
http://m.youtube.com/watch?v=F7nC4kQQqFc
Done! took it for its first drive around the yard in over a year
Here's a vid. She's running very rough and it was crammed in my shed, so the air coming from the noise was echoing straight into my face. So it gassed me out
http://m.youtube.com/watch?v=F7nC4kQQqFc
N/A ALL THE WAY
Re: my gb
Haha! Thanks
Was just coming to do that
I found a bloke who will so my paint for $1200. He supplies everything. In 2 pack just the same colour again, but still a nice colour none the less
Had an early day at work so I decided to start stripping the old girl ready for paint
Here's the start
The barest I've seen her in years!
While its all off I'll do behind the lights and grille black, along with the frame the lights mount on.
Was just coming to do that
I found a bloke who will so my paint for $1200. He supplies everything. In 2 pack just the same colour again, but still a nice colour none the less
Had an early day at work so I decided to start stripping the old girl ready for paint
Here's the start
The barest I've seen her in years!
While its all off I'll do behind the lights and grille black, along with the frame the lights mount on.
N/A ALL THE WAY
Re: my gb
So.... Pretty quiet in here
Update time!
Got a little but done today. Started her up for the first time in 2 weeks. Second try (first time the battery was tired and didn't want to cooperate), she fired straight away, no wind overs, just hit the key and an instand roar of pornographic 4g32ness
Got her out of the shed and turned her around so I could work on the rear end.
Got it all stripped out and I'll sort out the taillights (typical gb sedan housings... Farked). I'll try some fibreglass first up... And paint em up nice
Why the hell, did they not put a drain hole in the spare wheel well?! Lol it needs it IMO
Anyway, I also straightened up the exhaust so it's up a fair way now, might actually be legal height?? Have to get the tape out and have a squizz
Update time!
Got a little but done today. Started her up for the first time in 2 weeks. Second try (first time the battery was tired and didn't want to cooperate), she fired straight away, no wind overs, just hit the key and an instand roar of pornographic 4g32ness
Got her out of the shed and turned her around so I could work on the rear end.
Got it all stripped out and I'll sort out the taillights (typical gb sedan housings... Farked). I'll try some fibreglass first up... And paint em up nice
Why the hell, did they not put a drain hole in the spare wheel well?! Lol it needs it IMO
Anyway, I also straightened up the exhaust so it's up a fair way now, might actually be legal height?? Have to get the tape out and have a squizz
N/A ALL THE WAY
Re: my gb
No need for a drain hole in the wheel well if the plenum is in good nick - most are rusted out.
While you have the fibreglass happening, check it out
T.
While you have the fibreglass happening, check it out
T.
The highest reward for a man's toil is not what he gets for it but who he becomes by it.
John Ruskin
John Ruskin
Re: my gb
So, because things didn't go as planned on the weekend. I thought I'd do some refurbishing of parts
First up, headlight buckets
Before
During
And after
Compared to this
Prett happy with them. The pics don't do any justice, they're smooth and look like new from the shelf all packed in zip-lock bags ready for some new stainless screws and...
These!
http://m.ebay.com.au/itm/230992544053?nav=SEARCH&sbk=1
First up, headlight buckets
Before
During
And after
Compared to this
Prett happy with them. The pics don't do any justice, they're smooth and look like new from the shelf all packed in zip-lock bags ready for some new stainless screws and...
These!
http://m.ebay.com.au/itm/230992544053?nav=SEARCH&sbk=1
N/A ALL THE WAY
Re: my gb
Finally got off earlyish from work today, so I made it to the nut and bolt shop to buy my replacements all in stainless and looking good
Here they are all fitted up without the springs (need to find new ones or get mine dipped/sprayed with rust converter). The retainer trims need a steel wool and polish. But it was a trial fit to see if the screws fit (slightly larger heads).
Also bought some new plugs to rewire my taillights. Mine have multiple spade terminals into the light plug. So if you don't get it right, the indicators could be red, reverse lights orange, and brake lights white also got some spiral wrap so all the boot wiring can be tidied up and tucked away
Here they are all fitted up without the springs (need to find new ones or get mine dipped/sprayed with rust converter). The retainer trims need a steel wool and polish. But it was a trial fit to see if the screws fit (slightly larger heads).
Also bought some new plugs to rewire my taillights. Mine have multiple spade terminals into the light plug. So if you don't get it right, the indicators could be red, reverse lights orange, and brake lights white also got some spiral wrap so all the boot wiring can be tidied up and tucked away
N/A ALL THE WAY
Re: my gb
More tidying up of small parts it will add to the appearance once it's all together, and I'm bored
Taillight time today
Before (bloody gb surrounds! Ones nakered! )
Tidied up the wiring and replaced the awful excuse as a plug
Painted satin black
And reassembled! new plugs all round. Tidied wiring and paint
All ready for the front side to be cleaned up.
Anyone know if I can replace the incandescent bulbs with an led one?
Taillight time today
Before (bloody gb surrounds! Ones nakered! )
Tidied up the wiring and replaced the awful excuse as a plug
Painted satin black
And reassembled! new plugs all round. Tidied wiring and paint
All ready for the front side to be cleaned up.
Anyone know if I can replace the incandescent bulbs with an led one?
N/A ALL THE WAY
Re: my gb
Done some cleaning up today boot lip came up better than I expected!
Topside right corner
Bottom left (passenger)
Entire boot
I painted it all so it sealed it all after the rust converter. Done the same procedure to other small amounts around the place.
Getting all ready for Friday so the welder can weld in the new steel he's coming Friday. Then I hope to send her away Sunday for paint if all goes well. I can pick it up the following Friday and start reassembling
Getting excited!
Topside right corner
Bottom left (passenger)
Entire boot
I painted it all so it sealed it all after the rust converter. Done the same procedure to other small amounts around the place.
Getting all ready for Friday so the welder can weld in the new steel he's coming Friday. Then I hope to send her away Sunday for paint if all goes well. I can pick it up the following Friday and start reassembling
Getting excited!
N/A ALL THE WAY
Re: my gb
Have many refurbished parts now as I've been at it every day I've had off and every arvo after work. Got her stripped of the removable panels except the doors and guards. The rest of the panels along with the replacement passenger front door is away for paint as the car won't be ready until at least Friday and the bloke was bored
I'm biting the bullet as noone wants to lend out their tools, so I'm buying it myself. I'm finally getting an engine crane!
Had the boot lip replaced and welded back in. It's a little rough but I don't care. It goes under a boot rubber etc.
Just yesterday I got my guards rolled so the new wheels will fit once I go lower
Hit the exhaust out ready for a tidy up. The blokes who welded it done a crap job and there's holes blown all over the place! So I'll redo all those
While the engine is out, I'll give it a full detail, polish all the bits I want polished. Replace plugs, leads, points, rotor button, cap, filters and hoses (most of which will be braided).
While the master cylinder is out I'll clean it up new.
Once the car is back ill pull the front out of it, replace the rubbers and paint the components. Hopefully I'll have the gh struts ready before then could I have a listing for some really good pads for them? Thanks
Then I'll get some black body deadener and do in the guards, boot and cab.
So some fiddly other bits here and there and get the windows in.
Throw the carpet in, all the interior and trim of which I will make new door cards for get the wiring run back through the engine bay... PROPERLY! Lol. And put her all together.
Get it tuned and take her over for a rwc and rego
My goal time is before Xmas this year. It was the 7th dec for mopar mayhem. But realistically. I can't see that happening
I'm off for work, so pics later
I'm biting the bullet as noone wants to lend out their tools, so I'm buying it myself. I'm finally getting an engine crane!
Had the boot lip replaced and welded back in. It's a little rough but I don't care. It goes under a boot rubber etc.
Just yesterday I got my guards rolled so the new wheels will fit once I go lower
Hit the exhaust out ready for a tidy up. The blokes who welded it done a crap job and there's holes blown all over the place! So I'll redo all those
While the engine is out, I'll give it a full detail, polish all the bits I want polished. Replace plugs, leads, points, rotor button, cap, filters and hoses (most of which will be braided).
While the master cylinder is out I'll clean it up new.
Once the car is back ill pull the front out of it, replace the rubbers and paint the components. Hopefully I'll have the gh struts ready before then could I have a listing for some really good pads for them? Thanks
Then I'll get some black body deadener and do in the guards, boot and cab.
So some fiddly other bits here and there and get the windows in.
Throw the carpet in, all the interior and trim of which I will make new door cards for get the wiring run back through the engine bay... PROPERLY! Lol. And put her all together.
Get it tuned and take her over for a rwc and rego
My goal time is before Xmas this year. It was the 7th dec for mopar mayhem. But realistically. I can't see that happening
I'm off for work, so pics later
N/A ALL THE WAY