The PWS project is coming along slowly. We have just removed all the chrome trims from around the front and rear windows and we have made the following discoveries. The front window has very minor surface rust and has a couple of little holes about the size of a biro which can be repaired easily.
The rear window however has more. Around the top sides of the frame it is good, much the same as the front with only surface and minor rust holes. The problem is the base of the window. The lip with the weather seal is ok and the structural frames are all ok but the rear panel and inside the glass on the parcel shelf has a fair bit as you can see from the pics attached.
So my question is can this be repaired and how would you go about it....
![thinking :think:](./images/smilies/msn_thinking.gif)
Im thinkin a donor car? cut out that panel section and weld in and clean it all up?
All opinions are appreciated
Thanks
Jas
![Image](http://i101.photobucket.com/albums/m74/Jasinex/PWS/IMG_0285.jpg)
![Image](http://i101.photobucket.com/albums/m74/Jasinex/PWS/IMG_0301.jpg)
![Image](http://i101.photobucket.com/albums/m74/Jasinex/PWS/IMG_0295.jpg)
![Image](http://i101.photobucket.com/albums/m74/Jasinex/PWS/IMG_0283.jpg)