fibreglass panels

2.6_sigma_skidder · Post by **2.6_sigma_skidder** » Sat Jun 27, 2009 9:46 pm

hi guys iv been chasing new panels for scorpions for a while now and know one seems to make them so im after feed back on other ppl after panels as well . as we are thinking of making them in fibreglass and wonder if anyone whould be keen on them aswell??

SpEc_OpS · Post by **SpEc_OpS** » Sun Jun 28, 2009 1:15 pm

Would definately be interested wat model are you looking at making copies of?

2.6_sigma_skidder · Post by **2.6_sigma_skidder** » Sun Jun 28, 2009 2:34 pm

hi mate looking at gj gk atm as i have good panels for those to copy . but atm just trying to laser cut stainless steel inserts for doors to keep them strong and so the hinges dont rip out .

convertiblescorp82 · Post by **convertiblescorp82** » Sun Jun 28, 2009 9:14 pm

Yeah that would be sick! So hard to find good fenders for scorpions...so many of them rusted out at the bottom. When I was in an accident in my old scorp a mechanic actually welded the non rusted bottom half of my damaged panel to the new panel which was rusted out at the bottom...did I good job. I took the panels off the car before it was wrecked, so I still have it!

2.6_sigma_skidder · Post by **2.6_sigma_skidder** » Sun Jun 28, 2009 9:18 pm

yer i know they hard to find thats why im going to make them up for my toys lol that and they will never rust out

Lummy · Post by **Lummy** » Tue Jun 30, 2009 10:12 am

I would be interested in a set or two as well.

Cheers.

SpEc_OpS · Post by **SpEc_OpS** » Tue Jun 30, 2009 7:18 pm

ok maybe a dumb question but would gj fit onto a gh? obviously they wouldnt be a straight bolt on but i love the look of a gj front so if was to put a complete gj front on my scorp how hard would that be to do ie is everything a straight bolt in replacement?

2.6_sigma_skidder · Post by **2.6_sigma_skidder** » Tue Jun 30, 2009 9:32 pm

hi man i have got no idea lol but im sure others will .

Paddles · Post by **Paddles** » Wed Jul 01, 2009 7:32 pm

a GH scorp front is basically the same as a GJ scorp front, both have the twin square head lights, only real difference would be grill.
what exactly would you like to change between a GH scorp front and a GJ scorp front??

Paddles

gaz914 · Post by **gaz914** » Wed Jul 01, 2009 8:53 pm

SpEc_OpS wrote:ok maybe a dumb question but would gj fit onto a gh? obviously they wouldnt be a straight bolt on but i love the look of a gj front so if was to put a complete gj front on my scorp how hard would that be to do ie is everything a straight bolt in replacement?

GJ wagons are the same chassis as the GE/GH.
So the GJ front guards/bonnet/grill, etc from a wagon should bolt to a GE/GH sedan or Scorp OK.

There may some minor brackets different, etc but doable.

cheers
Gaz

RXCORP · Post by **RXCORP** » Wed Jul 08, 2009 5:16 pm

All scorpion guards are interchangeable. Only difference is the indicator location. Even bonnets and doors will work.

Thready · Post by **Thready** » Mon Aug 10, 2009 5:19 pm

My 81 GJ has different fender indicators, than Spec-Op's GH's. Single rectangular one positioned slightly back, compared to the double square ones on te GH. So I think that could be the only difference (besides the posibility of different bolt on locations).

Also, I would love to get some fiberglass fenders, even boot-lid and bonnet if possible.
But I am in VIC, Australia. Freight cost?

jimmo3 · Post by **jimmo3** » Mon Apr 26, 2010 10:06 am

The closest thing that I have seen to replacement Scorpion panels are those replacement lower rust sections offered by Rare Spares, I think?
I think that replacement fibregalss panels would be a great idea.

stumaclin · Post by **stumaclin** » Fri Jan 04, 2013 2:34 pm

Have any panels been made ?
Thanks

Sigma-galant.com

fibreglass panels

fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels

Re: fibreglass panels