I scored a cheap electric boot release kit of ebay, delivered for under $11.
I installed the switch here...
I got power by splicing into the demister, behind the fuse box. The demister has a 20A fuse and the boot release came with a 15A inline fuse. Safe power to me...
I ran the power wire down the D/S under the scuff panels and ran it into the boot with the tail harness. But I broke the trim on the rear dog leg.
Very brittle.
I accept donations, its blue...
The solenoid I mounted on the P/S of the lock. The lock on the siggy is not very user friendly, but I managed to mod it with a drill and a stanley knife.
Works noice.
cheers
