Search found 131 matches
- Wed Dec 10, 2014 8:10 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
The inside of the heater box was freaking diguisting. It was very difficult to stop myself from scraping the lot out with my tongue. http://i.imgur.com/24lSEs3.jpg I decided I had more degreaser than saliva anyway. http://i.imgur.com/BG8wsxn.jpg I soaked the old foam off with thinners and used a wir...
- Wed Dec 10, 2014 12:57 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Not many updates of late; but anyway, here I go. I'll pretend it's even worthwhile. I had to enlarge the piping holes in the support. They are getting fairly large now. I used a drill nibbler attachment to remove most of the metal. http://i.imgur.com/85dw3gB.jpg This looked like a good place for the...
- Mon Dec 08, 2014 12:17 pm
- Forum: Transmission/Drivetrain
- Topic: 4G54 Clutch upgrade
- Replies: 10
- Views: 3108
Re: 4G54 Clutch upgrade
NPC has quoted me $998 including GST for a flywheel and organic clutch. Apparently the use a 10" gtr sized clutch as the factory unit is just nowhere near large enough to work well without a button type clutch and horrible pedal feel. I think this is unfortunately a bit excessive for my budget ...
- Thu Dec 04, 2014 10:06 am
- Forum: Transmission/Drivetrain
- Topic: 4G54 Clutch upgrade
- Replies: 10
- Views: 3108
Re: 4G54 Clutch upgrade
Seller cancelled the order about 10 days after I made it. Was expecting to be receiving the item not a refund. If he let me know sooner I would definitely be a lot less pissed than I am now. I'm looking at this http://www.ebay.com.au/itm/EXEDY-HEAVY-DUTY-CLUTCH-KIT-MITSUBISHI-SIGMA-2-6L-GK-GN-1984-8...
- Mon Nov 24, 2014 12:02 pm
- Forum: Transmission/Drivetrain
- Topic: 4G54 Clutch upgrade
- Replies: 10
- Views: 3108
Re: 4G54 Clutch upgrade
I've done a little bit of research and there appear to be 2 different diameters and every other property is the same. The two diameters are Disc Outer Diameter: 9 7/16" = 239.7125 millimeters Disc Outer Diameter: 8 13/16" = 223.8375 millimeters This is actually a triton 4g64 flywheel but i...
- Sun Nov 23, 2014 10:13 am
- Forum: Transmission/Drivetrain
- Topic: 4G54 Clutch upgrade
- Replies: 10
- Views: 3108
Re: 4G54 Clutch upgrade
Getting closer the getting the Sigma back on the road and I remeber that last time I drove it I was playing with an EBC and the clutch was slipping up steep hills in 4th everywhere. I think I need to dive in and take the risk. With the two different type starion clutches, where is the difference? Is...
- Fri Nov 21, 2014 10:51 pm
- Forum: Electrical/Audio
- Topic: 4G54 CAS wiring
- Replies: 1
- Views: 1937
Re: 4G54 CAS wiring
I'll just leave this here.
- Fri Nov 21, 2014 2:23 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Paint Stripper works wonders! http://i60.tinypic.com/2dl43zd.jpg Bit of stoneguard. http://i57.tinypic.com/2ms4rcp.jpg Finished stripping the guard http://i60.tinypic.com/2pzwxnq.jpg Windscreen back in, was pretty happy to see this. http://i57.tinypic.com/24x4bxx.jpg Always make sure you clean your ...
- Thu Nov 20, 2014 10:00 am
- Forum: Electrical/Audio
- Topic: 4G54 CAS wiring
- Replies: 1
- Views: 1937
4G54 CAS wiring
I was asked what the wiring is for the 4G54 CAS. Here is how i figured it out. I used this to wire up to my megasquirt for trigger wheel wasted spark operation. Ideally you'd only use the CYL1 TDC pickup and install a 36-1 wheel on the crank for optimum timing accuracy. You can see the timing config...
- Mon Nov 17, 2014 11:29 pm
- Forum: Builds
- Topic: Cottees' 1987 Sigma GN GSR Super Edition
- Replies: 713
- Views: 1356328
Re: Cottees' 1987 Sigma GN GSR Super Edition
I've also experienced it from idler arm problems.
- Mon Nov 17, 2014 10:35 pm
- Forum: Builds
- Topic: Cottees' 1987 Sigma GN GSR Super Edition
- Replies: 713
- Views: 1356328
Re: Cottees' 1987 Sigma GN GSR Super Edition
Have you tried a different tyre? I have had trouble with crap tyres tramlining, especially when they are worn.
- Mon Nov 17, 2014 2:53 pm
- Forum: Builds
- Topic: hello i'm new and i wanna build my sigma(help)
- Replies: 22
- Views: 15621
Re: hello i'm new and i wanna build my sigma(help)
I too will vouch for the shitness of the rust around the windscreen.
- Wed Nov 12, 2014 9:34 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Dab of colour,
Probably get the gaurd stripped and primed tomorrow night
Probably get the gaurd stripped and primed tomorrow night
- Wed Nov 12, 2014 5:47 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Started stripping the guard. No bog! http://i58.tinypic.com/2hi4406.jpg Rust a lot better than the other http://i60.tinypic.com/348owea.jpg Blocking this bit back shitted me http://i57.tinypic.com/30a6des.jpg But I got it close enough. http://i62.tinypic.com/23kb68m.jpg Maybe some colour tonight; on...
- Mon Nov 10, 2014 8:33 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Heater core was definitely gone. This also confirms that GK heater cores are exactly the same despite what the ebay seller told me. http://i58.tinypic.com/2cr298i.jpg Next problem with the heater is the valve. It does not work at all. I have got a universal unit but it will not easily fit. I think i...
- Sun Nov 09, 2014 6:49 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
I have an unused pair of guard lowers here. Bought them from a company that was clearing out some of their old stock, so I got the pair for $10 They say GJ Sigma on them, but I'm fairly sure they would suit a GN too if you want them for the $10 +postage. I will take you upon that. I have another go...
- Sat Nov 08, 2014 5:05 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
- Fri Nov 07, 2014 9:29 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Last night I bogged around the windscreen. I also filed out the clip holes for the vents. I then got sick of it and watched a movie. Bad form.
At least I don't feel like scrapping it any more.
At least I don't feel like scrapping it any more.
- Thu Nov 06, 2014 12:44 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
I went to the paint shop and they sold me a great big tub of aluminium based 2 part body filler.
- Thu Nov 06, 2014 9:59 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Not much to report. Waiting on advice from my spraypainter mate about what to do next. I need to fill the pitting that is left with some sort of filler. Not sure if I should use bog or some sort of epoxy.
- Wed Nov 05, 2014 12:14 pm
- Forum: Forum Suggestions
- Topic: EDIT TAB
- Replies: 13
- Views: 9885
- Wed Nov 05, 2014 8:43 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Last major rust I'm worrying about. The guards need work too but hopefully I can just rust convert and fill them. Full respray will come one day, but I need to get the S13 rolling again before I even consider it. http://i61.tinypic.com/qnw9e0.jpg I just used a cheap panel beating kit and a random ch...
- Wed Nov 05, 2014 8:17 am
- Forum: Forum Suggestions
- Topic: EDIT TAB
- Replies: 13
- Views: 9885
Re: EDIT TAB
Preview != edit. Hence the reason there are two different words!
- Tue Nov 04, 2014 2:57 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
I understand, but I tried both and it flows better with DC.
- Tue Nov 04, 2014 11:24 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
Also I only have it in 3.2mm so it goes on pretty heavy.
- Tue Nov 04, 2014 11:23 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
It is silicon bronze. I used AC but it sucked.
- Tue Nov 04, 2014 10:16 am
- Forum: Forum Suggestions
- Topic: EDIT TAB
- Replies: 13
- Views: 9885
Re: EDIT TAB
The edit function had been removed to suit the retro nature of the site and the cars that it covers.
- Tue Nov 04, 2014 9:34 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
On the other side, after removing a huge chunk of filler crap, I discovered this deep cavity that reminded me of tooth decay. I tried to get as much rust out as i could but was not prepared to cut it right out. At least 6 layers of metal came together there. http://i62.tinypic.com/swwp5z.jpg I decid...
- Mon Nov 03, 2014 9:46 am
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
I found a pic from over 3 years ago where somebody posted the exact car I ended up buying on my wall! http://i61.tinypic.com/2duxkqr.jpg I know some of this part wasn't rusted and probably didn't need cutting, but I wanted to do something about the rust festering underneath so I cut it all out. http...
- Sat Nov 01, 2014 10:29 pm
- Forum: Builds
- Topic: Matt's Red GN
- Replies: 127
- Views: 227880
Re: Matt's Red GN
I blundered around and managed to close some holes up.
A lot more work to go. Banking more upsets for when I wrap it around a tree.
A lot more work to go. Banking more upsets for when I wrap it around a tree.