Sigma-galant.com

If you had a belt 32 would be a easy swap but for the chain never seen a factory one

Whats up with the points anyway? once there set right ect there fine never had a issue

Only thing i reckon is get a kit where you can convert it from points to electric

In my gc came with GE/H sigma seats from memory right side fits normal but the left rail was modded at the back alittle but but seem to fit fine other then that.

Yeah what do you want

GA

Bonnet
Steering wheel with good horn pad/badge
AM Radio
Rear of tail lights (bulb holder) that isnt cracked broken

GC
Chrome strip that bolts on front edge of guard Never found the right one when i had my GC

Thanks for the reply,

I read somewhere awhile back that i can be done with mods all good now just need to work out the steering hitting exhurst issue. Looks like i will have to get my headers changed for it to pass the steering arm which is big $$

What models of sigma cross member fit into a GA? running a 5 speed borg?

What headers can fit into a GA without it hitting the steering arm, i read somewhere that scorp ones work? other wise i will have to get my headers i have already modded

Cheers

UPDATE 2

Replaced both ball joints yesterday and car is 100% perfect. Found the left one was the worst out of the 2.

Thanks for everyones help

UPDATE i changed the idler arm and also noticed that the left hand side ball joint has alot of play in it so i am going to be replacing both left and right joints in the next week. Other then that it looks to me like all the bushs ect have been replaced in the last couple of years (look new). The st...

Saw a nice one yesterday, Gunmetal gray GC Was heading to Wollongong

Not sure if he is on this site or not

Could it be a swaybar?? reason i ask is that there is a slight bend in the middle of the bar looks like it may have had a hit

Thanks for reply

I will give all of that ago steering side of things has never been my strongest point.

I was thinking that myself might get that done and see if there is any change or if they see any problems.

Trying to workout what could be causing my steering issue in my GA When your driving it say 30 to 40 Ks it likes to dance on the road (jump left somthing then right like moving the wheel a quick sharp left or right) but if your over that speed say between 60 - 100 its not as bad but still there alit...

Hey

Anyone got a pic of the brake booster bracket? where it mounts onto ect. Just fitted a LB booster into my GA and need to make one/get one from somewhere but not sure where it bolts to as it didnt come with one

Cheers

If I wanted an Astron motor, I would buy a Sigma true that alot less mucking around thats for sure but ive owned a GC with a 2.6 before and was very happy with how it went on the road (being a auto also hehe)

Hey Thanks for the reply What someone has done is connect a new line from the breather to one of the inlets to the fuel pump being a sigma one is has 2 inlets one outlet. I removed the line from car blocked off the extra inlet and everything is sweet. I reconnected the breather up. Still dont know w...

All sorted now thanks 2Lgalant for pics

I ended up removing the line connected to the breather and connect the breater line back on blocked off the extra inlet on the fuel pump and didnt change anything of car what so ever so still dont know why it was fitted? The only thing i can come up with is it was a return line

Hey thanks for the pics but doesnt show what i need. I know there bolted to the tunnel just need to see the lengh of the left and right front buckels and also how the bolt goes together spaces washers ect to make sure there correctly fitted.

Hey mate

I think your inbox is full cant pm you

send me your email addy

Need a pic of the front seatbelt buckel mounts with buckels still bolted on and also need someoe to take one of the bolts out and take a pic of how it goes back together reason i ask is that i have over 6 diffrent buckels and cant remmber which one is which now :( along with the bolts/spaces ect Any...

If thats the ones from a GD? as i would of had the same issue I tried to many diffrent ideas for this and thats the only way i could of got it to work and keep the engineer happy.

Thanks for the reply

A good friend of mine cut and made a box section in the tower for it to pass without hitting tower Lucky he is a pannel beater by trade and great with metal. I have shown this to the engineer and he is happy with it so far

In my GA i got a wagon diff from a GC/D and sigma struts ect Best thing i would do is go with what davetrees says GC/D ect ones i would change it to depends on what you want to do with car really if you want to put a bigger motor in what ever but still as a good upgrade put those struts in cant go w...

Well its for the 2.6 mod that was done before i got the car. Engineer wanted it fitted so i couldnt say no

Its got a 2.6 siggy motor in it and yeah i dont know even if there is anything coming out of it. Out of fuel pump has 2 ins (standard sigma one) so im guessing someone thought hmm need a extra line ill just put it here. Going to pull it off tororrow and see if there is anything there, The tank looks...

Hey Its mounted using the original holes in firewall and that spacer thing as you can see in first pic. All bolts up with no mods to firewall what so ever. I didnt put that silly bracket on that holds the master cly from moving (from lancer) as well to me its all a tight fit and doesnt move what so ...

I must be having a moment today note to self check before writing hehe i thought they were fuel lines opps

Well what someone has done is connect to a breather line to the inlet of the fuel pump for what reason i dont know. I am just going to get rid of it and connect the breather back up

Yes thats it

Got the booster from a wreck LB lancer and i bought a new master cly as the one on car had more rust then the wreck lol

Hey Just finished my installing my brake booster into my GA thought i would share some photos of it. Sorry about pics as there not the best. The hardest part of the whole conversion was making new lines. I remade the front left and right. For the back i join it with a joiner off a GD i found. It wor...