Sigma-galant.com

They had the front ones which were a good buy, however my front bar has a dent in it and it was priced $190 to get fixed
Unfortunately thats gold coast prices

this is a sick ute man!!

I would be interested, however my car isn't in a very good cosmetic state at the moment lol

Will these headlights fit straight in to my LC lancer?

http://www.ebay.com.au/itm/HALOGEN-HIGH ... 999wt_1180

I bypassed the balast resistor on my 4g32.. bad idea.
Went through three sets of points and pretty much a whole new distributor before working out it was the problem.
half fried my coil as well.

Yer timing is all done now, I had a go at it but I couldnt get it running efficiently, My mechanic friend came over and fixed it up for me however my carbies are ridiculously out of tune.. Its bearly idling, So off to the shop tomorrow to get it tuned. Hopefully wont cost to much money.

I wasnt keen on paying the $95 call out fee for the auto electrician so i decided to join RACQ road side assist for $40 per year. As soon as I hung up the phone I called road side assistance and literally within 3 minutes the guy was outside my house. He said I had a faulty rotor button. I've replac...

is the cap seating properly ? Nah it seems to have a little bit of play (wobble). And I've only tried the first lead. Is there any easy way to see if the leads are faulty? I've checked for cracks or splits in the leads that could be a leak but i couldn't find anything. Is the coil wired up backward...

Where are these sparks? In the cap, on a removed lead, in the dizzy? There is spark going from the coil to the distributor Spark in the distributor when the cap is off No spark from the distributor to a removed lead while holding up to an earth.. Car still not running, Mobile auto electrician on th...

I replaced the condenser but still no luck :/

I didn't even think of that.. Ill check it out thanks dave

I had another look today and my coil is getting spark, so I'm assuming its either a faulty distributor cap or the leads so I'm getting both of them tomorrow.

its a 4g32

I had a look and theres only a earth wiring coming from the dizzy :s

The engine will turn over but won't start.
I've checked a few things and have found that my spark plug isn't getting any spark..
If i take off my dizzy cap and turn it over theres a spark.

200km ago i changed my plugs, distributor cap and the distributor button.

Any ideas of how to fix this?

I did a quick clean and repair of the rear louver.

That looks really good. Wish I had one!

10,000 views!

yewyew

Top 2 bolts were from the Blue/Silver LC were bent, and needed replacing. The parts from the Orange LC were not bent.

Would a possible cause of that be from hitting the gutter too hard straight on?

Yes my brake lights and reverse lights work. I had another look at it today using the same bulb method accept with an LED, and the power cuts at the dash loom.. Question, at the dash lights column switch does the switch engage a power source or an earth source? It may be something to do with the swi...

Dash lights, cigarette lighter, fan lights (fan itself still works), tail lights are not working.

I checked the fuses, none of them are broken.. could it be a connection to the fuse box maybe?

Yer nah i don't have a trailer plug..

I went to drive my car last night and my accessories wouldnt turn on. Also my Rear parker lights dont work :/ I ran a positive wire to the power wire of my dash and it lit up all my accessories and my parker lights, however when this wire is connected it lights up whether i turn my accessories switc...

a 4g63 would be awesome, If i could get it for under $750.. I have just under 6 months registration, in that time It would be good to purchase a bigger motor and box, start working on it so that when my LC is off the road I can drop the new motor in and start to get it running. Whether or not I turn...

If my budget is $750 should I spend it on modding the 4g32 or just buy an astron 2.6?
Will $750 get me a decent astron engine and box?
What are the pro's and con's?

Or is there an easier "bolt in" motor I can drop into the lancer? SR20 perhaps?

Problem:

Front right wheel making grinding/rubbing noise when the car moves. The noise gets faster as the car increases in speed.
At first I thought this might be the wheel bearing but with a closer look I think its the front axle :/

Any ideas on how to fix this?

Registered!

Is this legit? I know the picture doesnt look right, but thats the photo they use for all of the dash mats. It says that the mat is moulded to the dashes shape. Has anyone ordered one before or know any information about this company? http://www.customcarmats.com.au/mitsubishi-lancer-p-133001072.htm...

I don't know much about carbies but theres a little bubble window on the front of the carbies (facing the front of the car) that shows the amount of fuel being pumped in. According to my mechanic it should be at least half or a little over half way. Don't know if that helps with the possible fuel is...

Oh ok, would you know of anywhere I could pick some up?
Maybe a member has a set sitting around somewhere..

The back end seems to roll a lot when going around corners.. was hoping to stiffen the rear suspension up without spending too much money.

Does anyone know where I can get a rear sway bar for my lancer?
Or do I have to make one.. w

Cottees wrote: That is the sway bar bushes, part 42226. There was no listing for that bush, but got the closest universal bush available.

Oh ok. Take some photos when your putting it on. Im keen to see where it all goes.