Sigma-galant.com

Done and dusted. Gone and good luck Dave. Bob.

See the ad under for sale. Thanks, Bob.

Thanks blokes, 98% sure mine has round ports. Your comments have confirmed this. Thanks again, Bob.

Wondering if there is much difference (if any) between extractors for the 4G32 chain and belt drive? Are they interchangeable? Thanks, Bob.

Thanks mate, I'll see how I go with that. Thanks again, Bob.

My memory is pretty well r......t these days and I can't remember where the leads go from the positive terminal on the battery. I know one goes to the starter motor and one to the ballast but after that I' m stuffed. Pulled the whole lot out over 12 months ago and I know its my fault for not tagging...

g'day amehelo, Thanks mate. It is a lever type but I have made a new spacer which so far is working OK. Thanks, Bob.

G'day blokes, The petrol pump spacers that you are supposed to use of the 4G32B seem to be as scarce as rocking horse shit. Can't seem to get one anywhere. Any suggestions appreciated. Thanks, Bob.

G'day Jason, No mate, took off the upper bit that the outlet pipe is connected to the tank and found the hole in the bend of the inner part of the feed pipe right where it bends to go to the pickup. Welder reckons it will be a shit of a job to repair the hole in the pipe. To reattach to upper bit is...

Thanks fellas, Found the problem. Bloody great hole in the feed line inside tank. I have no idea how it would have got there, can only say that the previous owner must have done it somehow. Anyway, off to the welders. Thanks for all the help, Bob.

Thanks gaz and others, Really helpful. It looks as though I will have to get the grinder out after a weekend of soaking tank in water to purge all fumes etc. My welding ability won't allow me to put it back together but we have a couple of capable welders up here so they can finish it off. Thanks ag...

Thanks mate, I reckon thats the answer. Is there another fix other than opening tank and repairing? Thanks again, Bob.

Yeah thanks mate, I have tried wire,compressed air and various other bits and pieces to try to work out if there is a blockage inside the tank but it all seems to be clear. Petrol flows freely when the tank is held upside down etc and also when I connected another hose and fed about a metre of it in...

Yep, thanks mate. I can get a feed out of the tank when I hold it upside down, or sideways allowing gravity to do its job but when it comes to using suction to get a feed there are only fumes. Does anyone know if the feed comes from the bottom of the tank via the outlet which is located on the high ...

Cannot get a feed from the petrol tank outlet on my LC Lancer. I have cleaned the tank,refilled and only get fumes when I try to suck out petrol. I don't know how the tanks are made. Anybody who can help? Much appreciated. Thanks Bob.

OK, have cleaned out the petrol tank, petrol running freely from the tank feed outlet when it was held upside down. Connected all hoses, etc and still no feed from tank. Pump is working fine so tried blowing in feed outlet and there is no resistance, tried sucking on outlet pipe, again, nothing but ...

G'day blokes, Process of elimination indicates that I am not getting fuel from the fuel tank. The previous owner had used the car as a paddock basher so I'm not surprised. I live in a rather remote location and don't have a radiator/petrol tank repairer in the local area. Any ideas/suggestions to he...

Thanks Jason, Sticking with the mechanical pump and thought bigger outlet was the pipe but no go. I can only assume that its blocked.!!!!! Thanks anyway, Bob.

G'day gang, Which of the three outlets on the petrol tank of an 1980 LC Lancer A73 with 4G32B engine and 5 speed g'box is the fuel line? I have tried all three but no luck so far. The petrol pump is working OK as I have tested that also. I have had the tank out and its proving to be impossible to ge...

Thanks fellas, Really very helpful . As stated earlier I am sticking with the mechanical pump. Thanks again, Bob.

Car currently running mechanical fuel pump which has been pretty unreliable. Thought an electric pump might solve the problem but I s'pose I'll stick with the original. Thanks, Bob.

G'day gang, Want to put an electric fuel pump onto my LC Lancer with 4G32B engine and 5 speed. As I getting close to 70 yo I would like one that I can mount without having to lie flat on my back under the car. Any suggestions/recommendations greatly appreciated. Thanks, Bob.

Thanks fellas. I think I'll stick with the unleaded standard and see how it goes. Thanks for all the info. Bob.

Thanks blokes, All good. I'll go with the Goss one. Much appreciated. Regards, Bob.

Old fuel pump has died. Unable to repair, have been advised there are some by the brand name Goss available. Any good? Thanks, Bob.

Thanks Dave, much appreciated. All the best, Bob.

G'day gang, Just wondering what is the best option for the 4G32B unmodified except for twin throat weber?. Thanks Bob.

G'day gang, Need to replace the coil on my LC Lancer with 4G32B engine. Any particular brand is best suited??. Thanks, Bob.

Thanks Gaz, Today I have had a small win and I might be on the right track. I have wksp manuals for Arrow, Celeste etc but finding the exact wiring diagram has been a pain in the rectum. But,today had a win, thanks for your offer of assistance. Much appreciated. Thanks, Bob.

G'day, Still trying to sort the mess out from the battery. Can anyone please advise, I know positive goes to starter and neg goes to distributor via that ballast resistor(?) but from then until joining with wiring looms in place I am at a loss. Seems easy but I can't seem to find the ignition feed. ...