Sigma-galant.com

Is there a Hilux Diff that has 3'' Axle Tubes and On Center Differential? What about the widths?

where are the Hilux Diff pros in here

Do any Hilux Axle Housings have a 3'' Axle Tube and on center? and possible short to work on a gh sigma?

welded center you talking about?

Updates?

C2620 Front Drag Shock; Extended Length: 16.84; Collapsed Length: 10.37; Diameter: 1.63 and modify them with spacers and what not, to fit in my 3 bolt gh strut, Larger Brakes, Coil Over Kit, Camber Plates C2755 Rear Drag Shock; Extended Length: 16.41; Collapsed Length: 10.44; Diameter: 1.63 with the...

anyone

help me please

Oh crap , i meant it for four door sedans

i getting myslef a rear coil over spring kit like this one http://www.summitracing.com/parts/CMB-15-0014/?rtype=10 , will be removing the stock shock's location and relocating it on the inside section of the chassis, might consider a ladder bar also, anyway main question , Which Spring should i Choo...

Just a Bump , whats the Spring rate for Stock GH Rear Springs, saw a rear coil over kit and i might give them a try , here it is http://www.summitracing.com/parts/CMB-15-0014/?rtype=10

500 to 600 hundred what, Horsepower??? Why the hell are you worried about cutting and welding in another shock tower?? You will have to do a full Tub and Ladder bar suspension set up! Goto a Chassis builder! Doubt a Datsun diff will cope either... We do have some dreamers amongst us... lol Well its...

Thanks for the Assistance guys , you have time on your hands now as its Holidays Ehhh lol Dan Turbo Lancer, The police wont harass me about that , I will let a Good Knowledgable Suspension Fab guy do the Brackets , That 2'' of bracket will make a hell of alot of Slick Space when removed , I wanna ma...

Even if my question is dumb say so , Bet if it was one of the Popular guys here it would have reached Page 2 already

Opinions anyone?

I was asking this same question til i made my choice, Ill be going with a

Datsun 620 Rear (53'')
Locked 4.1
Silvia S14 Disc Brakes
Relocated Shocks

Nice cheater parts, My sigma will be powered by an SR20VE-T Engine , s13 sr20det bottom end with a sr20ve neo vvl head , most guys use sr20dets in GSR Box Lancers and Datsuns down here in Trinidad , but I choose the Mitsubishi Sigma GH as my project car because parts are soo cheap and available for ...

I have a GH Sigma Sedan and have been looking at a few Rear Suspension upgrade options , ive settled for Datsun 620 Diff with a 4.1 welded center, I noticed the GE Wagons have its shock mounted Slanted and away from the Wheel Hatch , making It very easy to fit some Broad tyres other than the Sedans ...

made some calls and sadly they are a bit rare and expensive down here , $800 USD for the rear , i think im gonna just use a Datsun 620 and weld the Center

Oh im Glad you replied , we down here use the 620 720 and datsun 280c (cedric) diffs , theres alot of them!!! , but unwisely we dont get lsds for them, I already have a 280c with h190 centre in my car but its too damn wide and no LSD!!, i was going to go Independent R33 suspension but i think its to...

thread back alive!! hey Whats the lenght of this Diff From End To End , GH Sigmas are 53'' i believe

thanks for the info, The S14 diff is the same as the r33 i have from those pics, but what i might do is use a cifero Frame which might make it shorter from rotor to rotor, I will also have to make some strut towers , heres the slight differences i worked up, the top is the IRS from the post and the ...

well we are planning to try one on mines and we do have to shorten it by about 4 inches, its about 60'' from end to end , i think if we can make it 56'' itll work, also the measurements are very close to the scorpions irs posted here, ll pst the r33's specs soon

What about an skyline R33 Suspension, anyone tried this?

wtf haha, yes everything good in Trini , are you sigma galant on Trinituner by chance ? That Slow 4 cyclinder is Mazworx you talking about i suppose , I think theyre doing some work on it , anyway back to TOPIC , which springs guys

Hello guys , Ive been Looking at some QA1 Coil Springs and Sleeve kits, what do you reccemmend for a GH Sigma with a ummm sr20det 8-) Engine for Drag Racing , I will be kicking 17 or 18'' wheels when im not racing though, I see theres Variable Rate Springs and Linear Type, which will suit my applica...

Hi Im from Trinidad and i have a GH Sigma, trying to find parts to modify my Suspension , Preferbly Adjustable Front and Rear shocks and a Coil over Kit for the front , Ive seen others are trying to get things right for their cars also , so far I have for the Rear- Datsun 280c Diff setup with Skylin...