LC Lancer Hatch
LC Lancer Hatch
Was looking around for a car for me to drive to work and my youngest daughter to learn to drive in.
Came across an LC Lancer that seemed like reasonable value, so we will see where it ends
cheers
Gaz
Came across an LC Lancer that seemed like reasonable value, so we will see where it ends
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
Very nice and straight looking hatch. Certainly looks better white than it would have in that brown, lol.
Do you have any plans for it or just see what developes?
Do you have any plans for it or just see what developes?
Re: LC Lancer Hatch
Take the front blinkers off, and swap them over (they're on the wrong sides).
Did you get all the chrome strips with it? It really needs the ones under the rear pop out windows.
It doesn't look to bad, but I'm not a fan of the spot lights cut into the grill.
Dave...
Did you get all the chrome strips with it? It really needs the ones under the rear pop out windows.
It doesn't look to bad, but I'm not a fan of the spot lights cut into the grill.
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: LC Lancer Hatch
Initially it will just sort minor things to make it nicer to drive (ie suspension and A/C) and reliable.Galant_GT0 wrote:Do you have any plans for it or just see what developes?
Its got to stay 'P' plater legal, but I can see a 4G54 with EFI making its way in there...
Blinkers noted , left headlight is a bit wonky as well.75wagon wrote:Take the front blinkers off, and swap them over (they're on the wrong sides).
Did you get all the chrome strips with it? It really needs the ones under the rear pop out windows.
Didn't get any chrome bits, I think I will paint the window frames black, like this.
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
Looks very tidy, I also notice you have two different model tail lights too.
- BlueThunder
- Posts: 339
- Joined: Thu Oct 14, 2010 2:18 am
- Location: Antwerp
Re: LC Lancer Hatch
True. The LH one you have is one of a LB hatch, the right one is the correct one for your LC.lb4g63 wrote:Looks very tidy, I also notice you have two different model tail lights too.
I also noticed that your LH reversing lamp lens should be turned by 90°...
Nice ride lb4g63!
Cheers
Sven
Re: LC Lancer Hatch
Looks good, but it needs a few things, EFI 2.6, big brakes, sport steering wheel and different wheels. I have 3 out of 4 in stock
Re: LC Lancer Hatch
car looks great. where abouts in sydney are you as i can help with the missing parts and tail light etc...
cheers
trev
cheers
trev
Re: LC Lancer Hatch
One stop shop!!HoonBoy wrote:Looks good, but it needs a few things, EFI 2.6, big brakes, sport steering wheel and different wheels. I have 3 out of 4 in stock
I'll get the little things tidied up first before I embark on yet another project
Cheers Trev - I'm in the Penrith area.treo4z wrote:car looks great. where abouts in sydney are you as i can help with the missing parts and tail light etc...
75wagon has some chrome window strips he is willing to part with, so that is sorted.
The LH taillamp is cracked, so the correct one would be a bonus.
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
I give it three months before it's tearing around hampton
Nice and tidy example anyway.
Nice and tidy example anyway.
1975 GC Galant Hardtop - 4G63 DOHC - Version 3.0 coming soon.
http://www.sigma-galant.com/viewtopic.php?f=46&t=485
http://www.sigma-galant.com/viewtopic.php?f=46&t=485
Re: LC Lancer Hatch
All the cool guys have three car projects on the go
Re: LC Lancer Hatch
Small update
Just been tidying up some minor things.
Added a thermosat to the engine so it warmed up. That 'caused' a water usage issue, then the water pump started leaking badly - thought the 2 were related. New water pump fitted, still a water issue which was seemingly resolved by tightening the top radiator hose.
Added H4 headlamps plus relay on the headlamps so we can see at night
New wheels fitted - had them 'in stock' from the Sigma. Needed a major clean up and new tyres.
The wheels were needed to clear the new rear brakes...
I have some Sigma struts to go in soon-ish and I need to change master cylinder to reduce the brake travel.
cheers
Gaz
Just been tidying up some minor things.
Added a thermosat to the engine so it warmed up. That 'caused' a water usage issue, then the water pump started leaking badly - thought the 2 were related. New water pump fitted, still a water issue which was seemingly resolved by tightening the top radiator hose.
Added H4 headlamps plus relay on the headlamps so we can see at night
New wheels fitted - had them 'in stock' from the Sigma. Needed a major clean up and new tyres.
The wheels were needed to clear the new rear brakes...
I have some Sigma struts to go in soon-ish and I need to change master cylinder to reduce the brake travel.
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
Love it, had an LB hatch. Loved the way I could chuck it around like a go kart with complete confidence.
-
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
Re: LC Lancer Hatch
what were those rear discs off? i wouldnt mind upgrading the breaking system on my lc
Re: LC Lancer Hatch
Looks tidy Gaz!
I should be able to visit the next motorkhana with the galant AND my latest acquisition hopefully we can line em all up and show them off
I should be able to visit the next motorkhana with the galant AND my latest acquisition hopefully we can line em all up and show them off
1975 GC Galant Hardtop - 4G63 DOHC - Version 3.0 coming soon.
http://www.sigma-galant.com/viewtopic.php?f=46&t=485
http://www.sigma-galant.com/viewtopic.php?f=46&t=485
Re: LC Lancer Hatch
CB Lancer GSR rear discs 265 x 10 with R31 Skyline calipers.metry wrote:what were those rear discs off? i wouldnt mind upgrading the breaking system on my lc
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
-
- Posts: 169
- Joined: Thu Apr 02, 2009 12:36 pm
- Location: Gold Coast QLD
Re: LC Lancer Hatch
Nice
The Globes are a huge improvement over the stock rims !
14 x 6 or 7" I presume with 205's ?
The Globes are a huge improvement over the stock rims !
14 x 6 or 7" I presume with 205's ?
Re: LC Lancer Hatch
14 x 6 with 195/60 tyres - didn't want to go overboard on tyres with a 6" rim
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
Spotted this the other day across the road when Steph was at Kelly n Steves. Looks very neat, sounded cool too.
1975 GC Galant Hardtop - 4G63 DOHC - Version 3.0 coming soon.
http://www.sigma-galant.com/viewtopic.php?f=46&t=485
http://www.sigma-galant.com/viewtopic.php?f=46&t=485
Re: LC Lancer Hatch
So my daughter has been driving this around.
The water usage issue was ongoing - could not find a leak, pressure tested it many times, hot cold, warm - nothing but the water went some where!
She rang me up the other day to say it 'stopped'...
I assumed it had overheated, so took water and went to have a look.
When I get there, engine has siezed solid - I presume it ran out of oil
I had a TR Magna in stock, so out came the engine.
A couple of days later and we have lots of bits...
Had to drill and tap some new holes in the timing cover I got from Supescan as the narrow block has a different sump.
Off to the engine man to have a look and see what needs doing.
The water usage issue was ongoing - could not find a leak, pressure tested it many times, hot cold, warm - nothing but the water went some where!
She rang me up the other day to say it 'stopped'...
I assumed it had overheated, so took water and went to have a look.
When I get there, engine has siezed solid - I presume it ran out of oil
I had a TR Magna in stock, so out came the engine.
A couple of days later and we have lots of bits...
Had to drill and tap some new holes in the timing cover I got from Supescan as the narrow block has a different sump.
Off to the engine man to have a look and see what needs doing.
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
I've never seen an oil pump discolour like that - it must have suffered from epic overheating...
Re: LC Lancer Hatch
So the engine bits came back - pics are at work
.75 over pistons, check head (OK), linish crank, new bearings, new oil pump, chain & gears.
Since we are going EFI, alternator needs to be slightly bigger - so Magna guts go into a Sigma housing.
Battery was in the way of the preferred spot for the air filter, so it moved to the RHS.
Of course the washer bottle had to move as well!
Modified the original wiring sto suit the battery location and added the EFI stuff.
After looking at various options for a surge tank, I decided that an in-tank swirl pot and pump would be the neatest.
So tank out and get to work with the angle grinder.
Inside pics
.75 over pistons, check head (OK), linish crank, new bearings, new oil pump, chain & gears.
Since we are going EFI, alternator needs to be slightly bigger - so Magna guts go into a Sigma housing.
Battery was in the way of the preferred spot for the air filter, so it moved to the RHS.
Of course the washer bottle had to move as well!
Modified the original wiring sto suit the battery location and added the EFI stuff.
After looking at various options for a surge tank, I decided that an in-tank swirl pot and pump would be the neatest.
So tank out and get to work with the angle grinder.
Inside pics
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
Built a (not so pretty) swirl pot to go in the tank.
It has trap-doors on all sides to allow fuel in, but not out.
Made a bracket to hiold the swirl pot in the tank and to allow somewher to bolt the fuel pump to.
Made a flange to allow the cut piece to be refitted - and removeable to replace pump if required!
Brazed the flange in, but need to tidy it up before I take pics
Hopefully this will be going next week...
It has trap-doors on all sides to allow fuel in, but not out.
Made a bracket to hiold the swirl pot in the tank and to allow somewher to bolt the fuel pump to.
Made a flange to allow the cut piece to be refitted - and removeable to replace pump if required!
Brazed the flange in, but need to tidy it up before I take pics
Hopefully this will be going next week...
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: LC Lancer Hatch
Forgot to take pics of the top of the tank once I finished...
Suffice to say I was happy enough.
This is a pic of the wiring to the fuel pump.
Bolted the engine in but had a "tight spot" at each revolution. Eventually figured it must be the clutch, so gearbox out
Turns out the clutch was fouling the bellhousing in one spot by < 0.5mm! Ground a bit off the clutch and all good.
The Sigma engine pipe I had fitted OK, just couldn't use the steering as the Pitman arm wanted to share the space with the pipe.
went to the local exhaust man and bought some pipe and bends. This is the result.
Where the pipes 'cross over' is where the steering is - which gives the clearance required.
Added some flanges and pipes, plus a muffler and suddenly there was an exhaust system
Heap of other little jobs done, now it looks like this.
Started it up today, sounds OK. Runs really rich though.
Water pump leaks but that is easily fixed.
Need to sort an alternator adjusting bracket and that is it!
Cheers
Gaz
Suffice to say I was happy enough.
This is a pic of the wiring to the fuel pump.
Bolted the engine in but had a "tight spot" at each revolution. Eventually figured it must be the clutch, so gearbox out
Turns out the clutch was fouling the bellhousing in one spot by < 0.5mm! Ground a bit off the clutch and all good.
The Sigma engine pipe I had fitted OK, just couldn't use the steering as the Pitman arm wanted to share the space with the pipe.
went to the local exhaust man and bought some pipe and bends. This is the result.
Where the pipes 'cross over' is where the steering is - which gives the clearance required.
Added some flanges and pipes, plus a muffler and suddenly there was an exhaust system
Heap of other little jobs done, now it looks like this.
Started it up today, sounds OK. Runs really rich though.
Water pump leaks but that is easily fixed.
Need to sort an alternator adjusting bracket and that is it!
Cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
-
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
Re: LC Lancer Hatch
looking food mate. you should of had a crack at painting the engine bay white while the engine was out.
Re: LC Lancer Hatch
Did think about it for a few minutes, but I don't have the time to do it - I'd want to take everything off, so not a 5 minute job.looking food mate. you should of had a crack at painting the engine bay white while the engine was out.
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
-
- Posts: 636
- Joined: Sun Feb 20, 2011 10:52 am
Re: LC Lancer Hatch
yeh i know how it is. im thinking of doing a similar engine swap into my LC but im just waiting to get onto my full license before i do anything with the engine