It had no oil pan or pickup with it, but I found them, will be blasting the rust out of the pan this weekend, then all sorts of timing belt and balance shaft madness will ensue. Hoping to have the engine in the following weekend.
Been a long drawn out project but I am getting more progress done recently than I have in a long time. Good feeling!
I'll do my best to keep this updated if anyone finds it interesting.
Still to go:
-Fuel cell in trunk (apparently no lift pump necessary on these engines)
-new fuel lines
-find a radiator that is half a millimeter wide and fits... probably aftermarket honda civic half-radiator
-find suitable oil cooler
-sort out wiring for injector pump
-have driveshaft machined
Possibly do an intercooler, stock setup did not have one.
And hopefully get some mitsubishi galant 1600 emblems for sides and the grille one. Anyone in AUS want to trade for dodge ones =]
Here is one pic for the thread, and a link to a folder on my google drive where I can put the rest. They don't let me do direct links for a forum I guess.
![Image](https://scontent-lax3-1.xx.fbcdn.net/t31.0-8/13064594_10154162067248454_9214857347613924888_o.jpg)
More pictures. New head, cracked turbo housing etc.
https://drive.google.com/open?id=0B9_ht ... lJGQV9Oenc