Belial's Mini Mopar (LC Lancer)
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
Front look like a good size, tho the rear definately needs fatter and taller rubber
Built with pride, Driven in anger
Re: Belial's Mini Mopar (LC Lancer)
Rear is still the factory jobbie...
Only threw one on the front!
Only threw one on the front!
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
Thought that was the case.........just thinking out loud
Built with pride, Driven in anger
Re: Belial's Mini Mopar (LC Lancer)
A few updates, sourced a rear louvre via tre04z.
Now to get it down to Melb.
Wetherill Park to me is easy, Blacktown to Wetherill Park will be a challenge!
Found the correct wheel nut's for the car and to suit the mags.
.... and since I had a few hours to myself, I took the wipers back to bare metal and painted them Black like a R/T would be.
While I was at it, I replaced the whole wiper head rather than just the blades.
Now to get it down to Melb.
Wetherill Park to me is easy, Blacktown to Wetherill Park will be a challenge!
Found the correct wheel nut's for the car and to suit the mags.
.... and since I had a few hours to myself, I took the wipers back to bare metal and painted them Black like a R/T would be.
While I was at it, I replaced the whole wiper head rather than just the blades.
Re: Belial's Mini Mopar (LC Lancer)
Look what was dropped off Sunday arvo....
I had a little time to myself on Sunday, so after flooding the replacement handbrake cables I scored with WD40, I thought I fit them.
Just as I was about to run the jack under the rear of the car, I decided to take my watch off. It was 12:30pm.
I jacked up the car
Placed the stands under the axles
Pulled the two rear wheels off
Disconnected the handbrake lines from the drums
Pulled both handbrake lines from the car
Fitted both replacement handbrake lines
Fitted both rear wheels
Jacked up car again to remove the stands and dropped it back down.
Washed my hands and put my watch back on.
It was now 1:02pm
WTF!!!
I wasn't even having a crack or prepped all the tools before I started!
If this was The Pig, it would have taken all afternoon, I would have broken something, destroyed atleast 1 knuckle and it still wouldn't be 100%
All my mates that have known the Pig over the years and been present when random crap just doesn't work as planned, are dumbfounded at the simplicity of each task associated with Mini Mopar!!
I had a little time to myself on Sunday, so after flooding the replacement handbrake cables I scored with WD40, I thought I fit them.
Just as I was about to run the jack under the rear of the car, I decided to take my watch off. It was 12:30pm.
I jacked up the car
Placed the stands under the axles
Pulled the two rear wheels off
Disconnected the handbrake lines from the drums
Pulled both handbrake lines from the car
Fitted both replacement handbrake lines
Fitted both rear wheels
Jacked up car again to remove the stands and dropped it back down.
Washed my hands and put my watch back on.
It was now 1:02pm
WTF!!!
I wasn't even having a crack or prepped all the tools before I started!
If this was The Pig, it would have taken all afternoon, I would have broken something, destroyed atleast 1 knuckle and it still wouldn't be 100%
All my mates that have known the Pig over the years and been present when random crap just doesn't work as planned, are dumbfounded at the simplicity of each task associated with Mini Mopar!!
Re: Belial's Mini Mopar (LC Lancer)
Looking good, glad the cables got there quickly and did the job
Re: Belial's Mini Mopar (LC Lancer)
A guy from a Chrysler forum is dropping off a R/T bonnet scoop tomorrow.
Kinda want to take a pic of his face when he see's Mini Mopar and realizes what the scoop is for!!!
Kinda want to take a pic of his face when he see's Mini Mopar and realizes what the scoop is for!!!
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
oh how i'd love to be a fly on the wall when he finds out what its for lol
In all honesty though, are you using the bonnet as a stensil for the blackouts?
or are you chopping up the bonnet for its scoop etc
In all honesty though, are you using the bonnet as a stensil for the blackouts?
or are you chopping up the bonnet for its scoop etc
Built with pride, Driven in anger
Re: Belial's Mini Mopar (LC Lancer)
I'm not entirely sure what you are asking..Scorpma82 wrote:
In all honesty though, are you using the bonnet as a stensil for the blackouts?
or are you chopping up the bonnet for its scoop etc
The bonnet and cowl panel will be Black, the scoop will be fitted on the passenger side of the bonnet.
Like this..
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
sorry, i was trying to ask
Were you planning on chopping up the original charger bonnet to fit Mini Mopar? or
Were you just purchasing the bonnet so you can copy the design onto the bonnet of Mini Mopar?
Were you planning on chopping up the original charger bonnet to fit Mini Mopar? or
Were you just purchasing the bonnet so you can copy the design onto the bonnet of Mini Mopar?
Built with pride, Driven in anger
Re: Belial's Mini Mopar (LC Lancer)
Regarding the bonnet, it'll have a strip of Silver in the centre, rest painted Black with the scoop screwed to the bonnet.
Leaving the Lancer bonnet on.
Leaving the Lancer bonnet on.
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
Gotcha!!
looking forward to the result
looking forward to the result
Built with pride, Driven in anger
Re: Belial's Mini Mopar (LC Lancer)
Shameless, I know!
..but for those of you on facebook...
Mini Mopar's page
https://www.facebook.com/pages/Mini-Mop ... k=timeline
..but for those of you on facebook...
Mini Mopar's page
https://www.facebook.com/pages/Mini-Mop ... k=timeline
Re: Belial's Mini Mopar (LC Lancer)
The financial controller has ripped up the handbrake regarding the paint job at this stage
But with The Pig still being at a workshop getting a few things done, like a T5 conversion, the spending has to somewhat curb.
Will still be sending off Mini Mopar for a RWC check when the Pig is done and any/all repairs have a green light, as well as all the associated costs with throwing it onto Club reg.
NB: Clips for rear louver went MIA and had to wait for the supplier to have Aussie Post run and investigation before paypal could come to the party... New ones left today!
But with The Pig still being at a workshop getting a few things done, like a T5 conversion, the spending has to somewhat curb.
Will still be sending off Mini Mopar for a RWC check when the Pig is done and any/all repairs have a green light, as well as all the associated costs with throwing it onto Club reg.
NB: Clips for rear louver went MIA and had to wait for the supplier to have Aussie Post run and investigation before paypal could come to the party... New ones left today!
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
I wouldn't be banging ur head against the wall too hard mate
Progress on your car has been much faster than progress on my car (the one I don't have yet lol)
Progress on your car has been much faster than progress on my car (the one I don't have yet lol)
Built with pride, Driven in anger
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Belial's Mini Mopar (LC Lancer)
Car's looking good, loving the theme....... Though I'm not totally convinced with the 265 stickers.......I think ur going to get sick to death of people asking u if it actually has a 265 in it tbh.......but like I said...I'm loving the theme and the stickers do suit that theme perfectly
Built with pride, Driven in anger
Re: Belial's Mini Mopar (LC Lancer)
Mini Mopar got chucked on the front lawn today and will be moved to the back yard on the weekend.
ALL progress I think will cease as The Pig was picked up and the bill just knocked everything way out of whack.
Won't even get a RWC and bang it onto club reg for a while yet. Standard reg expires September
On the upside, the guy at the workshop who done The Pig was laughing at how much it now lights up the rear tyres!
The think the 4:11's may be a bit much for the short gears in the T5....
(For the guy's who may also have an interest in V8's, a 4V Clevo just loves to rev, so when the engine want's to rev and you let it )
ALL progress I think will cease as The Pig was picked up and the bill just knocked everything way out of whack.
Won't even get a RWC and bang it onto club reg for a while yet. Standard reg expires September
On the upside, the guy at the workshop who done The Pig was laughing at how much it now lights up the rear tyres!
The think the 4:11's may be a bit much for the short gears in the T5....
(For the guy's who may also have an interest in V8's, a 4V Clevo just loves to rev, so when the engine want's to rev and you let it )
Re: Belial's Mini Mopar (LC Lancer)
Harder to pick than a broken nose.... Misses has said to hurry up and get a RWC so Mini Mopar can go onto Club Reg!!!
Re: Belial's Mini Mopar (LC Lancer)
Just sold The Pig (WTF)
and Mini Mopar is in getting a RWC.
Of course they knock the strut mounts and NO ONE makes them anymore...
Have bought the K-Mac Camber and Castor kit ($400) as a $40 rubber one is no longer available.
Didn't help with this forum being down this week!
Also having trouble finding a windscreen as mine has a small crack that can't be repaired!!!
and Mini Mopar is in getting a RWC.
Of course they knock the strut mounts and NO ONE makes them anymore...
Have bought the K-Mac Camber and Castor kit ($400) as a $40 rubber one is no longer available.
Didn't help with this forum being down this week!
Also having trouble finding a windscreen as mine has a small crack that can't be repaired!!!
-
- Posts: 169
- Joined: Thu Apr 02, 2009 12:36 pm
- Location: Gold Coast QLD
Re: Belial's Mini Mopar (LC Lancer)
Belial
Windscreens are readily available so don't know why you would have any trouble.
I believe they are made up here in QLD if new stock needs to be made!
Windscreens are readily available so don't know why you would have any trouble.
I believe they are made up here in QLD if new stock needs to be made!
Re: Belial's Mini Mopar (LC Lancer)
Protector glass industries
At Beenliegh Qld
Thay made the original and do replacements
There 20 mins up the road from me uf you need help
Cheers stealth
At Beenliegh Qld
Thay made the original and do replacements
There 20 mins up the road from me uf you need help
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Red bull , fuelling the fastest race cars on earth !
Re: Belial's Mini Mopar (LC Lancer)
The windscreen was a surprise , one of the easiest things l had to find .
Rang a small husband and wife type business in the morning and l think fitted in that afternoon .
I think $170 comes to mind , about 3yrs ago.
Keep up your good work quietly watching your build
Rang a small husband and wife type business in the morning and l think fitted in that afternoon .
I think $170 comes to mind , about 3yrs ago.
Keep up your good work quietly watching your build
Re: Belial's Mini Mopar (LC Lancer)
I seen the mob in QLD who sell them them and say "Fast Way" don't freight them???
I work for TNT and we transport "Fast Ways" interstate freight?!
We also ship pallet loads of windscreens each day, including all glass for Nissan, Toyota, Ford, Nissan BMW and John Deere!
I work for TNT and we transport "Fast Ways" interstate freight?!
We also ship pallet loads of windscreens each day, including all glass for Nissan, Toyota, Ford, Nissan BMW and John Deere!
-
- Posts: 169
- Joined: Thu Apr 02, 2009 12:36 pm
- Location: Gold Coast QLD
Re: Belial's Mini Mopar (LC Lancer)
I just rang my windscreen man and he organises it through the windscreen people.
No need to get it yourself!
No need to get it yourself!
Re: Belial's Mini Mopar (LC Lancer)
The mob in QLD have a distributor/Warehouse 20 mins from my place.
So, windscreen will be picked up today.
K Mac Strut tops arrived express post yesterday and everything but the gearbox mount is now ready to be fitted.
Found a mob in Wagga Wagga who say they have the mount on the shelf but when he tried to attach a pic to confirm, it didn't work...
Hopefully when I call them today, he can send the pic to my phone.
If it's the one I need, I'll get it sent express postage and then Mini Mopar can have it's legit RWC done by the end of the week.
Bonus as the rego runs out next week!
Then onto club reg and sit waiting for the paint job.
Still undecided on engine as side draft carbs will some what resemble a Charger engine bay but I don't like how close to the shock tower the carbs are.
Down draft look cool but "Teaser's" V6 looks like a V8 and I'd do a 340 cui air cleaner!!
So, windscreen will be picked up today.
K Mac Strut tops arrived express post yesterday and everything but the gearbox mount is now ready to be fitted.
Found a mob in Wagga Wagga who say they have the mount on the shelf but when he tried to attach a pic to confirm, it didn't work...
Hopefully when I call them today, he can send the pic to my phone.
If it's the one I need, I'll get it sent express postage and then Mini Mopar can have it's legit RWC done by the end of the week.
Bonus as the rego runs out next week!
Then onto club reg and sit waiting for the paint job.
Still undecided on engine as side draft carbs will some what resemble a Charger engine bay but I don't like how close to the shock tower the carbs are.
Down draft look cool but "Teaser's" V6 looks like a V8 and I'd do a 340 cui air cleaner!!
Re: Belial's Mini Mopar (LC Lancer)
So why not look at putting a v6 into it like the one you like , its been done
Or I reckon and 4g63 twincam with webers and a msd would look right in the engine bay if done well
Cheers stealth
Or I reckon and 4g63 twincam with webers and a msd would look right in the engine bay if done well
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Red bull , fuelling the fastest race cars on earth !