1/4 Mile Leaderboard

[Cottees]

1. MrSigma - - 10.2 @ 127 MPH
2. VGJONO - - 19.86 @ 68.34 MPH
3. Scorpma82 - 1982 Mitsubishi Sigma Wagon - 20.01 @ ~60 MPH

Reply below to add your 1/4 mile time to the leaderboard. Attach a photo of proof if you have it. Also include what car you used.

[75glnt]

Gret idea!!!

[VGJONO]

E/T of 19.86 @ 68.34 MPH

I plan to improve upon this next time i hit the Dragstrip, my galant is a completely different car to what it was then



Cheers
VGJONO

P.S. apparently i can use [img] codes in here otherwise i would have a picture

[Scorpma82]

My Scorpion wagon ran a best 20.01@60odd mph....very slow I know...but I am winning atm

With my next wagon built, I will be aiming at around about the 15sec mark.....certainly nothing exciting, but I'm setting the car up for comfort for when i drive 200km's to get to a car show...not to save .5 of a second on a 400m piece of road

[MrSigma]

10.2@127mph pic and time slip available

[BAD-SIG]

Next time I''m out with my Sigma I'll see if I can do a couple of runs to get a 1/8 and 1/4 mile timed runs.

[cheaterparts]

you guys should out up times for the whole tracki not just the boring bit

[Scorpma82]

Shouldn't a racing driving appreciate the complexity of ALL forms of car racing???

[Billsy]

you guys should out up times for the whole tracki not just the boring bit

haha, was waiting for this

Winton - 1.42.2

[cheaterparts]

haha, was waiting for this

Winton - 1.42.2

Winton 2006 at the ken lee HQ 4 hour running in the super tin tops driven by Richard Fairlam 1.41.2 in his first race meeting with the car
Sandown around 2007 again Richard pulled a 1.28 - although the best I've done is a 1.30
Phillip Island my best has been a 2.00.5 and got to that time a few times

Gippsland Park ( old Morwell hillclimb track ) 35.87 sec in 2004 at the Aust hillclimb champs and the winning time for Improved Production 2001 - 3000

[FunkyP]

http://www.sqperformance.com/?page_id=2

[FunkyP]

http://www.sqperformance.com/?page_id=2

[DVSGAL]

Anyone interested in grouping up and heading out to the Friday night drags at Calder Park?

[Scorpma82]

This Friday?????

[A112H]

Straights are for fast cars
Corners are for fast drivers

[natosig]

17.5 at 130 gk sigma not very fast but reaction time was shit

[Scorpma82]

suits me perfectly A112H

When i go to the car shows....im there to see the cars...not the drivers

[LukeAussie]

Ha ha, too true Jason... in my opinion, fast car or otherwise, corners are more fun too. Even (especially!) in massive RWD muscle cars

[Scorpma82]

for the guys that talk alot about preferring corners....what's your opinion on NASCAR racing?

they have corner where u can go flat out in

[unique10]

I wouldnt mind going to calder one night just to see what I can run but I dont like the idea of paying 70 bucks for 3 runs because its full of people tesing out their new pod filters on their commodores.

When my club (charger club) does a heathcote day I'll post it up on here anf maybe make a good day out of it.

Nascar is for rednecks with too much money. Lol.
I like to drive my car than more than 10 seconds at a time, so my vote goes to circuit racing.

[geezer101]

I get Nascar as literally every car is built to the same specifications. It's left to the pit crew and the driver to find the edge (but it is as boring as paint to watch). Circuit racing would be a blast but you don't want to go out on the track with your daily and go home with it in a wheel barrow

[Rally_2.6LC]

LC Lancer - 15.83 but cant remember the speed down the 1/4 at Eastern Creek.


Matt

[Scorpma82]

at 15.83 ull be doing about 88-95 mph

[Merv]

19.433 @71.1mph

[VGJONO]

18.160 @ 75.55MPH

https://fbcdn-sphotos-e-a.akamaihd.net/ ... 8127_n.jpg

[VGJONO]

18.160 @ 75.55mph

https://fbcdn-sphotos-e-a.akamaihd.net/ ... 8127_n.jpg

[ozdusterdave]

13.0 @ 101mph

[Pianca]

I have a 1980 Scorpion 2.6 5 speed which I'm slowly working, here are the results of my drag runs:
Stock standard - 18.396
Side draft carb - 17.194
High comp pistons, race cam, head work - 16.769
Diff ratio change 3.54 & LSD - 16.520

I do one project a year and then a drag run to objectively check the results...