Identify engine and parts.

Ask other members technical questions here, if your after a certain answer/result have our members help you.
Post Reply
User avatar
dnvgalant
Posts: 68
Joined: Fri Oct 29, 2010 5:12 am
Location: Brisbane

Identify engine and parts.

Post by dnvgalant »

Hey Guys,

About 6 months ago i scored a 4g54 astron II for $200.
I have since partly fitted this into my GB and am just upto doing the Brakes and suspension.
With the engine, i got some other bits such as, front strut and brake assembly,
Rear axles with hub and discs, Rear calipers and all the steering arms and what not.

The bloke i got it all off said it was all out of a GK, but im not sure of this as the GK
i seen at the wreckers had an astron I and rear drums. Did they GK come with astron II and Disc rear?
or would this more likely be GN?

Also, has anyone tried fitting the 2 bolt struts to a GB by just swapping the ball joints out for sigma ones?
and Would the axles swap out so i could then just weld a mount for the caliper.
just thought i would dip into the wealth of knowledge before i go experimenting :thumpsup:

Cheers
Daniel
User avatar
SIC082
Posts: 47
Joined: Sun Jun 20, 2010 1:06 pm
Location: Adelaide

Re: Identify engine and parts.

Post by SIC082 »

Disc brake rear could be GK, depends on model. My GN only has drums but my GJ SE has discs. Later GK had Astron II.
Post Reply