4G63 Front thermostat relocation with water gallery mod.
Posted: Wed Apr 09, 2014 1:26 pm
I know this has been posted up in the past with people using the Jay racing re location kits and in my opinion is a awesome simple modification for anyone wanting to go down the path of fitting a twin cam engine to a RWD mitsi but has anyone done the water gallery modification to the head that old mate Bill's Auto Fabrications has indicated on his site?
Link Here ---->http://www.billsautofab.com/forums/foru ... select=258
I'm going down this path for my 4G63 swap and since the motor has been build not that long ago ide rather not pull of the head if i can avoid it and not too keen on running the rear adapter plate and running coolant hoses along the side of the motor. I'm not interested in keeping the heater core as the car will be used for drag purposes only. I can see a issue of water not circulating properly in the "back" of the head when installed in a RWD application, has anyone come across any issues not doing the mod?
Link Here ---->http://www.billsautofab.com/forums/foru ... select=258
I'm going down this path for my 4G63 swap and since the motor has been build not that long ago ide rather not pull of the head if i can avoid it and not too keen on running the rear adapter plate and running coolant hoses along the side of the motor. I'm not interested in keeping the heater core as the car will be used for drag purposes only. I can see a issue of water not circulating properly in the "back" of the head when installed in a RWD application, has anyone come across any issues not doing the mod?