Sigma white cluster dials
Sigma white cluster dials
When I had my first Sigma, I looked around and couldn't find any white dial replacements for the Sigma, so I ended up starting to make my own. I didn't end up finishing them, but if anyone is looking for a complete set for the Sigma, I should be able to finish it. I could also do it for other cars, I just need access to the dial backing.
Here is an example of the white speedo dial for a Sigma:
Here is an example of the white speedo dial for a Sigma:
Re: Sigma white cluster dials
what they gunna be made out of?
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
Re: Sigma white cluster dials
No idea yet. For white back dials, I am thinking of printing on white plastic sheets, a bit thicker than transparency sheets. A while back I also thought about silk screening the designs, but just didn't get around to trying it out. Good silk screening should produce a better result than a printer would be able to do. I am open to suggestions to how they could be made.
Re: Sigma white cluster dials
a Vinyl cutter/plotter may also work.
Re: Sigma white cluster dials
sigmare has done this, easy he reckons, just rubed of the black matt finish, and guess what, white backing, then used some sort of lettering for the lines and numbers, looked trick, and it was a gh dash, hope it helps
69 vf valiant coupe 225 efi turbo
74 gc galant 2.6 stroker 3.0
lpg c10 9 inch gt 4088 roller
74 gc galant 2.6 stroker 3.0
lpg c10 9 inch gt 4088 roller
Re: Sigma white cluster dials
I sprayed mine with white spray paint and then went over the numbers with blue permanent texta.
Excuse the mess
But you can kinda see what i did....
Excuse the mess
But you can kinda see what i did....
Last edited by DVSGAL on Thu Jul 16, 2009 11:17 pm, edited 1 time in total.
Re: Sigma white cluster dials
good idea dvs, but sigmares looked good, the actual globes lit up green so looked like a autometer dash, try it on a old dash, clean the black of and put a light behind it, and whala, sexy omg late model pimp dash lol.
69 vf valiant coupe 225 efi turbo
74 gc galant 2.6 stroker 3.0
lpg c10 9 inch gt 4088 roller
74 gc galant 2.6 stroker 3.0
lpg c10 9 inch gt 4088 roller
Re: Sigma white cluster dials
lol rust going through the wheel well like me.
gay huh...
can get mines fixed for 200 though
gay huh...
can get mines fixed for 200 though
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
Re: Sigma white cluster dials
I painted mine silver. Because the markings and numbers are raised on the Galant it was easy to repaint the info any colour you want.
I choose yellow and red. Looked good when I did it but am re thinking the yellow now, lol
I choose yellow and red. Looked good when I did it but am re thinking the yellow now, lol
-
- Posts: 15
- Joined: Fri Feb 12, 2010 5:46 pm
- Location: Central Coast, NSW
Re: Sigma white cluster dials
Can you guys tell me how you managed to get into the dash to make the face white? I would love to do it to my 84 sigma
Re: Sigma white cluster dials
There is a Blue GC Coupe here in Adelaide that i have seen with the White gauge face's done that illuminate Green. Dunno how much it cost to get done, but i think a place called Emtech did it for him.
2* 73 A53 16L Dodge Colt (Plymouth Cricket), 2* 73 GB Galant Sedan's, 1* 74 GB Galant Sedan, 1* 76 VK Valiant Regal,
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE