who likes dished old school wheels?
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
who likes dished old school wheels?
well i have a link for you then...
http://www.ajps.com.au/parts/performance_wheels.asp
my mate has a set on his KE70
fronts are 15x8 and the rears are 15x10 with 195's on them
im gonna get a set for the galant next year, after the grandpa thing has been and gone
http://www.ajps.com.au/parts/performance_wheels.asp
my mate has a set on his KE70
fronts are 15x8 and the rears are 15x10 with 195's on them
im gonna get a set for the galant next year, after the grandpa thing has been and gone
- boogernissan
- Posts: 59
- Joined: Fri Sep 18, 2009 7:26 pm
- Location: Mandurah Western Australia
Re: who likes dished old school wheels?
sick,i like them a lot
Re: who likes dished old school wheels?
I likey, I'm gonna do the same with the scorp with SSR Mark II's, 15x8 and 15x9 with 195/50's all around
-Josh.
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Re: who likes dished old school wheels?
yea thats good prices to! but how wide can i go on a ga/gb? and wat offset wood i need?
any help appricated!
any help appricated!
My car: Colt/Galant AI standed. going AII GS speks!
Re: who likes dished old school wheels?
Galants are difficult because of the front. I think the best you can do is like a 6 inch wide rim or maybe 7 inch if you get the offset right, would be around +12 I believe.
You can go wider on the back though.
Has anyone fit 7 inch rims under the front guards on their galant? (without flaring panels, coilovers or other major suspension mods)
You can go wider on the back though.
Has anyone fit 7 inch rims under the front guards on their galant? (without flaring panels, coilovers or other major suspension mods)
Needs GA or GB galant front cut to resurrect a GTO. Please help if you can
Re: who likes dished old school wheels?
wat do you think 13x6 superlites on the front and 13x7 on the back?
My car: Colt/Galant AI standed. going AII GS speks!
Re: who likes dished old school wheels?
That would work, with the right off sets of course
Check these old schooler rims out
http://ozdat.com/forum/viewtopic.php?f=55&t=20480
Check these old schooler rims out
http://ozdat.com/forum/viewtopic.php?f=55&t=20480
Needs GA or GB galant front cut to resurrect a GTO. Please help if you can
Re: who likes dished old school wheels?
Here are the rims from my wagon on my old GB. The inside of these wheels sit 1 inch further out than standard.colta51 wrote:wat do you think 13x6 superlites on the front and 13x7 on the back?
Here is a shot with the standard rims on the back of my wagon and the hustlers on the front. The outside of the rims are 3 inches further from the hub than standard. It's not a really good photo but you get the idea. There would be enough room for 7 inch rims if you got the offset right. But to not get hassled by the cops, you would probably want to lip the front guards just a little as GA/ GB front guards are just a little smaller than GC/ GD (I only say this because the rims I have stuck out of the guard further on my GB than they do on the GC). If I ran narrower tyres (I have 205's on them) would bring them in more too (the tyres are wider than the rims). My brother runs 185's on his 14x6 minilites and they look good, but I wouldn't go smaller than that on a 6 inch rim.
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: who likes dished old school wheels?
cheers for that! i see wat you meen. i will be looking in to getting wheels soon i will let you no
how i go!
how i go!
My car: Colt/Galant AI standed. going AII GS speks!
Re: who likes dished old school wheels?
Sweet link EVL076, I thought we were just about stuck with shitty ROTA wheels or importing Jap wheels. I do like the SSR meshies though, lol
- EVL076
- S-G Veteran
- Posts: 480
- Joined: Mon Mar 16, 2009 10:08 pm
- Location: Baggin' 4th and chirpin' 5th
Re: who likes dished old school wheels?
ROTA does have a decent selection tho
and there are some mean looking SSR rims around too
i am re-thinking wheel choice now, but i might end up buying the dished Globes and the other set i like too.. convo pro's
and there are some mean looking SSR rims around too
i am re-thinking wheel choice now, but i might end up buying the dished Globes and the other set i like too.. convo pro's
Re: who likes dished old school wheels?
The guys at JIS always have sweet SSR's and pretty good prices too.
http://www.japaneseimportspares.com.au/wheel4stud/
http://www.japaneseimportspares.com.au/wheel4stud/