Galant E10 4G63BT, Project RALLI ART

Post your build topics here! This is for restorations only.
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

I set up a fuel sender also so all works fine now, the only thing left is to set up an ABS, as digital dash isnt compatible with ABS i will need to work out something else :)

and that black down line is now painted in white

Image

Image

Image

and future intake manifold

Image

Image



and i got one more body kit of RALLI ART :D :D :D :D

Image

:cool::cool::cool::cool::cool::cool::cool:
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

here is one update, i made an air box, 3inch intake pipe with K&N filter



Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

in a past few months a lot of work has been done

Megasquirt is installed now, finally, as i had MS1, it was converted to MS2 , with MS2 daughterboard and upgraded processor

FPR Aeromotive is installed, battery is moved to trunk, with 25mm2 cable
It has Eclipse coil ignition
Intercooler polished pipes
turbotimer hks
innovate lc-1 wideband
a/f ratio gauge, boost gauge and oil temp gauge

on CAS sensor it is now high resolution plate 24:1 tooth

shift light is also added

Image

Image

Image

Image

wiring a megasquirt2

Image

Image

Image

Image

Image

it has great fetures now, such as launch contorol, flat shift, hope this week i will finish tuning the motor on the dyno

engine bay is now finished, this is a result

Image
geezer101
Posts: 1869
Joined: Sat Jun 11, 2011 10:49 pm
Location: adelaide (SA)

Re: Galant E10 4G63BT, Project RALLI ART

Post by geezer101 »

I always like checking out your progress on your Galant Tomica93 - this time around it looks like it's taken a big leap forward in development. It's also good to see that you're not scared of taking on the work yourself, the wiring alone looks daunting. :thumpsup:
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

thanks, yeap this is a 12months of work, it was a little bit slow, but i didnt put here pics of many things i ve worked on it, hope i will soon go on a dyno and also be finished with this project, and drive finally :D
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

here car is finally finished

results
227,5 HP
348Nm

Image

Image

Image

Image

engine turned 125000km

Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

some profess photos :)

Image

Image

Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

hy there guys, please like my both pictures on facebook if you have one

thanks

https://www.facebook.com/photo.php?fbid ... permPage=1

https://www.facebook.com/photo.php?fbid ... permPage=1
geezer101
Posts: 1869
Joined: Sat Jun 11, 2011 10:49 pm
Location: adelaide (SA)

Re: Galant E10 4G63BT, Project RALLI ART

Post by geezer101 »

As always Tomica, nice to see how your Galant has evolved - but what happened to the rear end? Looks like you've had a bit of a push from behind :( (and I like your car anyway but I don't do failbook... :thumpsup: )
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

thanks :)

yes i have an accident in july, only 3 weeks after i put it on the road again, a van hit me at the back :(

Image
geezer101
Posts: 1869
Joined: Sat Jun 11, 2011 10:49 pm
Location: adelaide (SA)

Re: Galant E10 4G63BT, Project RALLI ART

Post by geezer101 »

...damn :(
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

new engine has arrived, finally DOHC is going in :D

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

New injectors from EVO 4 , 510cc , with 69kkm

Image

Image

One picture in nature

Image

and then there was a burnout with old engine

Image

Image


Image

one video

]http://www.youtube.com/watch?v=e3zZHIs6hL4

New alternetor for DOHC

Image

Image

After clening it up, and polishing a bit, here is a result

Image

fuel line for DOHC

Image

And then, a party time

Image

Image

next step was connecting a wires CLT, IAT , TPS and CAS sensors, CLT and IAT are the same, while TPS and CAS are a bit different
also, TPS needs calibration

one video after TPS was connected

http://www.youtube.com/watch?v=NekZojCvryw

CAS opened, and a 24:1 tooth is putted in

Image

Image

Friends are always ready

Image

Engine in its place

Image

Video of a first start

http://www.youtube.com/watch?v=zp9TLSSUqag


Compression test, by cilinders
1.145psi
2.147psi
3.145psi
4.144psi

and engine is putted on an homemade engine holder, to be easier to make a big service and cleaning it up a bit

Image


:)
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

First parts arrived

ARP head studs
set for balance shaft delete
injector rubber
oil filter x2
oil cap gasket x2
O2 housinga and downpipe 70mm gasket

Image

Image

Image

set for balance shaft delete

Image
geezer101
Posts: 1869
Joined: Sat Jun 11, 2011 10:49 pm
Location: adelaide (SA)

Re: Galant E10 4G63BT, Project RALLI ART

Post by geezer101 »

You've been busy haven't you? And a second incarnation with a new engine! Looks like you have got bitten by the HP bug badly. Your Galant must've been a handful with over 220 HP up front. :P
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

yeah, those HP bugs are bad hahahah

iam doing my best, last turbo started to smoke on SOHC, and a new turbo would cost me about 600 dollars. and i got a complete engine for 1000dollars, so why not :D

and for the power, its a big and heavy car, i have 225/45/17 tyres and it almost never sliped in second gear(no LSD)
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

wastegate is polished

Image

Image

new gauges from evo 9 MR

Image

oil temp sensor fixed

Image

Image

installed red illumination

Image


engine dissasembled

Image


Image



Image

then balance shafts are out, total weight save is 2.9kg

Image

Image

OEM part for oil pump housing

Image

then the cleaning part

Image

Image

Image

Image

valve coer was in pretty bad shape

Image

Image

piston before and after

Image

Image

then next part was block

Image

painted

Image

Image

Image
geezer101
Posts: 1869
Joined: Sat Jun 11, 2011 10:49 pm
Location: adelaide (SA)

Re: Galant E10 4G63BT, Project RALLI ART

Post by geezer101 »

And so it begins again. Did you find a buyer for your last engine? The twin cam will take your project to a whole new level - can hardly wait to see your progress Tomica :thumpsup:
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Yep , i have sold my last engine to Austria

i am also waiting for the progress, cant wait too see how it will run now with new engine :D
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

new OEM parts

Image

head cylinder is dissassembeled

Image

Image

exhaust valve, before and after

Image

washed oil pump

Image

Image

all pistons are cleaned up, after 15washes

Image

all is washed, and ready for install

Image

valve cover painted

Image

Image

painted exhaust manifold, turbo housing, o2 housing and covers

Image

Image

oil pan cleaned up and painted, also a timing cover

Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

galvanized bolts, and lines :D

Image

lines looks like they are cromed

Image

and how it should looked on the block

Image

Image

Main water pipe is now rust free , and completely galvanized from outside, as well as inside
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Just received a package
Mitsubishi Genuine parts

ACL Race bearings, Perfect Circle Rings


Image

All parts collected so far

Image

Rings

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

sneak peak :D

Image
geezer101
Posts: 1869
Joined: Sat Jun 11, 2011 10:49 pm
Location: adelaide (SA)

Re: Galant E10 4G63BT, Project RALLI ART

Post by geezer101 »

Nice work Tomica. Every time I check your progress you are turning it up a notch. Can't wait to see it back together. :thumpsup:
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

thanks :)

finally I restored original RalliArt 15" wheels

Image


Image

Image

some tool that came in

Image

then i made another valve cover set

Image


Image

painted

Image

Image

Image

then i got AMG cover

Image

Image

Image

Image

il cap restored

Image

also a clear timing cover came in

Image

and a final result

Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

machine work done

honed and surfaced block, surfaced valves, surfaced head, and a polished crankshaft

Image

Image

Image

Image

Image


how it should look when i will start assembley

Image

then i got mitsubishi eclipse 3g lifters

difference between 1g and 3g

Image

Image

next is cleaning, and working on a port job on the oil gallery on the block (where oil pump sits), by that i mean on a smoothing the surface for better oil flow
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

installed in crank with piston and rods, head to block dowels, ARP headstuds

acl race vs OEM main bearing

Image

Image

Image

Image

Image


rings and bearings are installed

Image


Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

head on its place, torqed

thermostan housing, camshafts, lifters, rocker arms etc ,all in its place

its really nice to put all of those things together while they are so clean

Image

Image

thermostat housing

Image

thread locker on the oil plug for oil gallery on the head

Image

Image

Image

Image



again another box is waiting to be galvanized, and iam wainting for another box of parts from America, hope that is the last one :D
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

pice before and after galvanized

Image

Image

coil and power ignition mounts

Image

then i got a third valve cover, painted in original silver with red letters combination

Image

intake OEM gaskets and galvanized bolts

Image

mediablasted intake manifold

Image

Image

Image

Image

before-after

Image

Image

and how an engine looks so far

Image
tandanus
Posts: 606
Joined: Sun Mar 22, 2009 7:36 am
Location: NSW Central Coast

Re: Galant E10 4G63BT, Project RALLI ART

Post by tandanus »

:) Yowsers ! :)
T.
The highest reward for a man's toil is not what he gets for it but who he becomes by it.
John Ruskin
Post Reply