Galant E10 4G63BT, Project RALLI ART

Post your build topics here! This is for restorations only.
User avatar
75wagon
Admin
Posts: 5886
Joined: Sun Apr 12, 2009 5:16 pm
Location: Newcastle/Lake Macquarie

Re: Galant E10 4G63BT, Project RALLI ART

Post by 75wagon »

Tomica93 wrote:Dave here is a link for video

https://www.youtube.com/watch?v=30WK_nj8n_c
Sounds good :thumpsup:
I think it's giving me some ideas...

Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

And finally mapping day

Results are 313hp and 395Nm
Finished on 1.3bar boost

Image

Image

Image

Image
ozdusterdave
Posts: 164
Joined: Sun Jul 17, 2011 5:07 pm

Re: Galant E10 4G63BT, Project RALLI ART

Post by ozdusterdave »

Dastech Dasgood Ya
# YaGunnersYa
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Lets post a few updates

next thing for deal with was suspension and handling


Suspension was original, but all springs are worn out and old, rear shocks were leaking, and also the car was too soft to handle that kind of power so i upgrade it to much better level

Ive bought Cusco street ZERO coilovers for Lancer EVO III

car handles much much better in corners, over the holes its almost like stock suspension, over the speed bumps you have to be little gentle , overall very good coilover

Image

Also got the powerflex camber bolts as the car sits little lower now

Image

Got new oem bumper indicator lens

Image

Then the next problem was grip, i had only 2 and a half years old tyres but they didnt have grip at all

So i bought new tyres Continental Contisportcontact 5 215/45/17, also as I will upgrade the brakes i need new wheels that are the same dimensions (17" , 7J , ET40) but with flatter spokes
that means more space for bigger brake calipers, luckily i found Superleggeras which are 4kg lighter than previous wheels EACH! and also they have 1,5cm more space for brake calipers

Image

Cleaned up the wheels, waxed them, got new central rings 67,1mm and new lug nuts

Image

And ready to fit on a car

Image

Results are awesome, lighter steering wheel (as each wheel is lighter for 4kg), and much more grip, which allows me to run full boost in second gear afer 5000rpm

Image


Also getting the parts for next work

new tie rods, new tie rod ends, new boots, new front bearings, new CV joints

Image
User avatar
JimmyG
Posts: 200
Joined: Wed Mar 25, 2009 3:48 pm
Location: Bendigo, VIC

Re: Galant E10 4G63BT, Project RALLI ART

Post by JimmyG »

Mint! :thumpsup: :thumpsup: :thumpsup:
Cars: 95 Wrx, 77 Galant, 73 Galant.
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Next update, got the brakes, 4pot brembos with braided steel lines and 320mm discs

Image

redrilled discs to 4x114,3 and test fit, it fills up the 17" nicely

Image

got new front bearing in, and also polyurethane on arms

Image

Image

Custom made heavier springs for trunk opening, as the factory didnt design it for trunk spoiler, now the trunk hood sits up alone :)

Image

Another gearbox from 2.4 Galant is in with lower miles on it

also installed new OEM shaft seals

Image

new clutch disk material

Image

also new braided steel line for the slave clutch cylinder, you can see how worn out is the old one

Image

and new slave clutch cylinder

Image
mstrrab1992
Posts: 548
Joined: Wed Sep 21, 2011 1:13 pm
Location: Sunshine coast ATM

Re: Galant E10 4G63BT, Project RALLI ART

Post by mstrrab1992 »

loving the work keep it up
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Disassembled front subframe

Image

Some new parts

Image

Took out the bushings front front subframe, they were in really bad condition, as you can see on the picture, new oem ones are ready to pop in

Image

also new stoppers

Image

Image

New gasket for fuel sender unit

Image

New grommet for hood pin

Image

Then i have to install new seals in the steering rack, and also new rod ties, rod tie ends and new boots

Image

Image


New boot for steering rack

Image


Dont have picture when shafts were finished, but painted them to OEM colour

Image

Painted brackets for front subframe

Image

Installed and painted slave clutch cylinder

Image

Custom made full rubber front engine mount

Image

Polyurethane SuperPro bush on sway bar

Image

Finally made an adapter for EVO ISC to DSM wire installation

Image
User avatar
75wagon
Admin
Posts: 5886
Joined: Sun Apr 12, 2009 5:16 pm
Location: Newcastle/Lake Macquarie

Re: Galant E10 4G63BT, Project RALLI ART

Post by 75wagon »

Glad to see you still putting updates here for us to see.

You must have a good supply for parts. You seem to be able to find plenty of them.

Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Well forums are pretty dead, i know there is a lot of people still reading it, but no one is commenting


also no one is really surprised for such a work anymore, because they all think its easy as there are milions of projects all over the net



parts, yes, veeery veeery hard, everyday researching and asking people all over the world the get some pieces :)
mstrrab1992
Posts: 548
Joined: Wed Sep 21, 2011 1:13 pm
Location: Sunshine coast ATM

Re: Galant E10 4G63BT, Project RALLI ART

Post by mstrrab1992 »

i guess over time peoples taste change in what they like seeing, but i like the work your doing, i definately would like to own your car now hahaha. but its good to see activeness on the forum, some people are still active. once i get into my project itll be going up. but your doing a good job.

what are you plans for the future?
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
User avatar
BlueThunder
Posts: 338
Joined: Thu Oct 14, 2010 2:18 am
Location: Antwerp

Re: Galant E10 4G63BT, Project RALLI ART

Post by BlueThunder »

Tomica93 wrote:Well forums are pretty dead, i know there is a lot of people still reading it, but no one is commenting


also no one is really surprised for such a work anymore, because they all think its easy as there are milions of projects all over the net



parts, yes, veeery veeery hard, everyday researching and asking people all over the world the get some pieces :)
Tomica93, nobody likes too much talking during watching a porn movie. That's why everybody is quiet, they just enjoy to watch what you are doing :p
Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

@blueTunder- hahahah nice one


@mstrrab1992- well you can never predict plans, but so far is finishing some details and fine tuning on cold

only bigger plan for now is A/C for the next year
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Assembled complete front subframe, car really drives fantastic now, no sounds at all, and brakes, AWESOME, it has the stopping power now

also to make it a little softer i have made custom springs, front 5,6kg/mm and rears 3,5kg/mm

Image

Calipers refurbed, new, bolts, paint and stickers, little before/after

Image

Image

Image

Image

It fitted very nice :D

Image

New blood

Image

At the geometry service

Image

Image


And got the fluidampr crank pulley & ARP bolts

Image
User avatar
JimmyG
Posts: 200
Joined: Wed Mar 25, 2009 3:48 pm
Location: Bendigo, VIC

Re: Galant E10 4G63BT, Project RALLI ART

Post by JimmyG »

I 100% enjoy your updates! This and the "Hulk" build are my first port of call after log in.
Cars: 95 Wrx, 77 Galant, 73 Galant.
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

thanks, i know someone is reading my posts :D
User avatar
75wagon
Admin
Posts: 5886
Joined: Sun Apr 12, 2009 5:16 pm
Location: Newcastle/Lake Macquarie

Re: Galant E10 4G63BT, Project RALLI ART

Post by 75wagon »

Tomica93 wrote:thanks, i know someone is reading my posts :D
There's more than one :thumpsup:

Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
GB_BB4C
Posts: 932
Joined: Fri Mar 20, 2009 9:37 am
Location: Adelaide, SA

Re: Galant E10 4G63BT, Project RALLI ART

Post by GB_BB4C »

JimmyG wrote:I 100% enjoy your updates! This and the "Hulk" build are my first port of call after log in.
Agree with JimmyG's statement.. although the forum is pretty quiet, always good to see progress pics and effort that is still being put in.
2* 73 A53 16L Dodge Colt (Plymouth Cricket), 2* 73 GB Galant Sedan's, 1* 74 GB Galant Sedan, 1* 76 VK Valiant Regal,
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE

Image
User avatar
JimmyG
Posts: 200
Joined: Wed Mar 25, 2009 3:48 pm
Location: Bendigo, VIC

Re: Galant E10 4G63BT, Project RALLI ART

Post by JimmyG »

100 plus posts and over 6000 views. Move along people nothing to see here. LOL :P
Cars: 95 Wrx, 77 Galant, 73 Galant.
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

glad to read this guys, will be an update soon :)
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Few more updates

new rear steel brake feed lines

Image

installed fluidampr crank pulley, and also new Gates, alternator and power steering belt

Image

looks good underneath now :)

Image

Got brand new OEM front grille

Image

Image

Adjustable rear dampers came in, Cusco, newer dampers, and also they are longer for 1cm, which means a little more street friendly

Image

Comparasion to a non adjustable CUSCO

Image

and one nice pic from the petrol station

Image
brichman
Posts: 71
Joined: Sun Jul 26, 2015 9:05 pm
Location: Adelaide

Re: Galant E10 4G63BT, Project RALLI ART

Post by brichman »

Looking good mate! :)
Scorpma82
Sigma-Galant Police (Global Mod)
Posts: 2119
Joined: Sat Oct 22, 2011 6:48 am
Location: melbourne

Re: Galant E10 4G63BT, Project RALLI ART

Post by Scorpma82 »

How the hell are you managing to find so many brand new OEM parts?!?!?!?!?!?!
Built with pride, Driven in anger
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

magic hahah (money)
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Little update, havent been working on a car. I was driving it for a change, done over 3000km over the last 3months

In front of Pula Arena

Image

then i was on a oldtimer meeting, with my dad(green 4gen Galant), and a good friend of mine with his RalliArt version also in white. That was a pretty cool sight

Image

Image

Image

Image

And some better photos of mine car :)

Image

Image

Image

Image

Image

Image
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Couple more updates

Crankpreassure was next thing to deal with, no more oil dip stick popping out and inlet on turbo is now dry :)

so I have made a custom valve cover, drilled a much larger hole, and weld bigger fitting, removed PCV valve and also put a bigger one, but left the thread in case i will want to return PCV :)

after that, professional coat was apllied

Image


difference between holes

Image

New oil Catch can and silicone hose

Image



Then few shots from the sea and driving :)

Image

Image

Image

Image

Image

Then got new silicone clear hose for washerfluid line, so I have replaced an old ugly one :)

Image

Image


Thats all for now :)
User avatar
JimmyG
Posts: 200
Joined: Wed Mar 25, 2009 3:48 pm
Location: Bendigo, VIC

Re: Galant E10 4G63BT, Project RALLI ART

Post by JimmyG »

:D
Cars: 95 Wrx, 77 Galant, 73 Galant.
User avatar
Tomica93
Posts: 91
Joined: Fri Sep 30, 2011 4:54 am

Re: Galant E10 4G63BT, Project RALLI ART

Post by Tomica93 »

Next thing to deal with was the power windows switch.

First they started to fail on the main one (passanger window couldnt go up) and also letters worn out after years of using

First i have disassembled everything, cleaned up the contacts, and it all woreked again like a charm

Image

Image

Image




Then i found a ultra rare JDM main power window switch that has Door Lock option on it and AUTO funstion for drivers window.
It was in Malaysia, and it is very very hard to communicate with them and in the end to get parts from

So i accepted a challenge of making a UNIQUE, only in the world, LHD main switch with AUTO power windows on drivers doors, and Door lock option

Image

And finally received it after 2months

Image


Next big problem was it was all for RHD (you cant put AUTO function on the left side) and also you need to use LHD plastic surround to fit properly
However plastic surround didnt have DOOR LOCKS sign


after days of researching, find up it wasnt a sticker on the buttons and plastic surround. It was printed with high quality colour that remains under usage of fingers
luckily i found one guy who was able to do this for me, so i have also refurbed buttons and plastic surround, also all other buttons on passanger doors

Image


next thing about AUTO function. Mitsubishi Galant Sigma in USA had AUTO function on driver window as a LHD. luckily found one with broken plastic and cutted wires, but again seller didnt want to ship, so I had to find agents etc.
after 2more months finally item arrived


Image



next problem was it didnt have DOOR LOCK, so i had to cut the JDM one and weld it with USA one

Image



Next. all was working except AUTO function for driver window when it go UP.
Thing is, in the US there was a child proof law. so the button had some kind of restriction, and also 1wire was missing from the small control unit plate (white wire in the picture above was added).


When it all was solved , here is the final result

Image

From 3very rare parts, I got 1 Unique with all functions working :)
Final result: astonishing :D

Image
Post Reply