Geoffs GE Sigma EFI Turbo Build

Post by **TUFSIG** » Mon Oct 04, 2010 7:30 pm

who made your manifold

WagonWheel · Post by **WagonWheel** » Mon Oct 04, 2010 7:42 pm

Bought it from the us mate. Have you still got those turbo wheels for sale dude? Still waiting to hear back from you

Post by **TUFSIG** » Tue Oct 05, 2010 7:02 am

yeah man sorry i keep forgetting lol
i still have them
did you wana come check em out ?

WagonWheel · Post by **WagonWheel** » Tue Oct 05, 2010 8:51 am

Yeah I'm def keen on them. Depending on price and condition obviously. Could you get me some pics and let me know the details. If you could email them to geoff_a (at) tpg.com.au that would be great. And also where about are you located?

WagonWheel · Post by **WagonWheel** » Sun Oct 10, 2010 4:58 pm

Just got some autometer gauges, ones boost and the other is air/fuel - $100

WagonWheel · Post by **WagonWheel** » Tue Oct 12, 2010 3:12 pm

Heres part of my fuel setup, will be going with a facet lift pump and a bosch 044 high pressure pump. ($120)

WagonWheel · Post by **WagonWheel** » Thu Oct 14, 2010 4:08 pm

The project now has a name: ($250)

Post by **A112H** » Thu Oct 14, 2010 4:24 pm

Nice 1

turbogj260 · Post by **turbogj260** » Thu Oct 14, 2010 6:06 pm

is that a ebay manifold? U got a link?

WagonWheel · Post by **WagonWheel** » Thu Oct 14, 2010 8:31 pm

Yeah mate, from the states though, heres the link

http://cgi.ebay.com/ebaymotors/Mitsubis ... ccessories

Post by **Cottees** » Thu Oct 14, 2010 9:46 pm

WagonWheel wrote:Yeah mate, from the states though, heres the link

http://cgi.ebay.com/ebaymotors/Mitsubis ... ccessories

Now is a good time to buy from the US, at the moment the exchange rate is AU$1.000 = US$0.997

rob020 · Post by **rob020** » Thu Oct 14, 2010 10:20 pm

i like the surge tank, how much was it? got a link for it?

WagonWheel · Post by **WagonWheel** » Fri Oct 15, 2010 6:44 pm

Yeah surge tank looks mint, will be much better under the car too

http://cgi.ebay.com.au/undercar-ally-su ... 4cf26095bd

13bsigma · Post by **13bsigma** » Sat Oct 16, 2010 12:07 pm

any idea where you will fit the surge tank?? can you put up a pic of where?? i am doing up my GE slowly and wish to have a surge tank outside the car too

WagonWheel · Post by **WagonWheel** » Sun Oct 17, 2010 3:15 pm

Yeah ive seen a photo of a guy on this forum with a similar surge tank at the rear of the car, looks like it fits in nicely. Ill try and find the pic, cant remember which thread it was in though.

WagonWheel · Post by **WagonWheel** » Sun Oct 17, 2010 3:45 pm

Picked up a set of turbo wheels today, ($200), they need a good tidy up but they are nice and straight, no gutter rash or anything. Will look sweet with the red crap gone and all nice and polished

Post by **75wagon** » Mon Oct 18, 2010 9:30 am

WagonWheel wrote:Picked up a set of turbo wheels today, ($200)

$200 is pretty good.
Have fun polishing them, are you doing them your self?

Dave...

WagonWheel · Post by **WagonWheel** » Mon Oct 18, 2010 5:10 pm

Lol i cant stand polishing, i HATE it! I got the tyres stripped off them today, think im gonna ring around a few places and get a few quotes. It was also suggested to me to get them chrome dipped for ease of maintenance, but i dunno. Suggestions?

Post by **astronturbo77** » Mon Oct 18, 2010 5:14 pm

i have a bad feeling that stainless manifold is going to crack mate.. just out of interest whats the build quality like? would you be able to measure the pipe thickness with some verniers for people who are interested?

WagonWheel · Post by **WagonWheel** » Mon Oct 18, 2010 5:20 pm

Will measure it when i get a chance, build quality looks decent, welds are very solid and neat, internally the edges have been die grinded down at the merge so its not a complete mess.

Post by **TUFSIG** » Mon Oct 18, 2010 5:21 pm

hey man ill have to msg you that guys new number that does the wheels i gave you an old business card on sun

LEE · Post by **LEE** » Mon Oct 18, 2010 5:41 pm

wow hope you didnt pay 695 us !! for it , cause i bought the complete turbo kit exhaust side only , turbo, wastegate , manifold , lines , pipes etc etc for 800 off them earlier in the year

WagonWheel · Post by **WagonWheel** » Mon Oct 18, 2010 6:11 pm

No, manifold cost me $250 aus delivered, and i got the turbo, gate, oil line for $350

And yeah luke if you could let me know his number that would be awesome.

LEE · Post by **LEE** » Tue Oct 19, 2010 7:09 pm

well Ive done 5000km on the kit (fairly hard )and all is sweet , so you should see a good service from it

WagonWheel · Post by **WagonWheel** » Tue Oct 19, 2010 7:25 pm

Good to know thanks mate. Also just bought a turbo badge and a set of 4 centre caps for the wheels i just bought

WagonWheel · Post by **WagonWheel** » Sun Oct 31, 2010 12:59 pm

Time for an update

Sigma turbo centre caps and turbo badge - $140
Sigma turbo bonnet vent - $140

Microtech LT10s with handset with all laptop cables etc and a loom to suit something else - $600

And ill throw in a pic of the head and turbo

WagonWheel · Post by **WagonWheel** » Wed Jan 05, 2011 8:48 pm

Finally got a bit of time this arvo to do a bit of work on the old girl. Progress has been almost stopped over the christmas period, but hoping to get back into it soon and get it on the road.
Cleaned up the rust around the rear window and converted and primed it, going to let it dry over night then sand it back and put a coat of paint on it. Wont be the best job in the world but will look a hell of a lot better than it did.

WagonWheel · Post by **WagonWheel** » Thu Jan 27, 2011 5:36 pm

Took my headlining out the other day to get redone as it was sagging badly. Got it back today, very happy with how it came out. $50

Also found these headlight stone guards in the shed, thought it might go with the old school look for the car, havnt put them on yet so i dont know if theyll look any good or not though, but ill decide then if im gonna use them or not.

Post by **ddt** » Thu Jan 27, 2011 9:36 pm

Took my headlining out the other day to get redone as it was sagging badly. Got it back today, very happy with how it came out. $50

so cheap -it cost me more to do it myself! lol -though the sedan headlining is almost half the size of wagon's. Looks great

WagonWheel · Post by **WagonWheel** » Thu Jan 27, 2011 9:42 pm

Yeah I know. A chick I know is an apprentice trimmer which works out good for me. Wagons may be bigger but damn they are so much easier to get in and out of. Sedan roof linings are a pain in the ass

Sigma-galant.com

Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build

Re: Geoffs GE Sigma EFI Turbo Build