My GC Coupe

Post your build topics here! This is for restorations only.
Post Reply
pistorf
Posts: 181
Joined: Sun Mar 07, 2010 12:04 pm
Location: Eugowra NSW

My GC Coupe

Post by pistorf »

Image
Image
Image

I am restoring a VH Valiant Pacer for a guy and as the job has turned out a lot bigger than first anticipated,he has given me this as some extra incentive.
being an ex rally car,it has Bilstein suspension,wagon diff,springs and rear brakes,adjustable strut tops,half roll cage and a jap 5speed. the 2 litre that was in it has been long removed.
This will sit locked away till my Escort rally car is completed and my house is finished.
The body is straight and absolutely rust free. I will have to remove the roof vent and find some old front guards to replace the sections that were removed.
astronturbo77
Sigma-Galant Police (Global Mod)
Posts: 1356
Joined: Thu Mar 26, 2009 8:09 pm
Location: Hobart Tasmania

Re: My GC Coupe

Post by astronturbo77 »

more pictures of said 'go' fast items please. you must be able to find some background history if its a ex rally car? :thumpsup: :thumpsup: :thumpsup:
BUILT NOT BROUGHT BY ALGIE.
petey
Posts: 8
Joined: Sat Aug 14, 2010 3:38 pm
Location: Salisbury, South Australia

Re: My GC Coupe

Post by petey »

I think that would look brilliant in the same colours, just hi gloss, but that's just me...
pistorf
Posts: 181
Joined: Sun Mar 07, 2010 12:04 pm
Location: Eugowra NSW

Re: My GC Coupe

Post by pistorf »

astronturbo77 wrote:more pictures of said 'go' fast items please. you must be able to find some background history if its a ex rally car? :thumpsup: :thumpsup: :thumpsup:
The history shouldn't be too hard to trace as it was built by the guys that had the panel shop opposite where I got it from.
It had a fairly wild 2 litre in it and was mainly run in AMSAG events .
The guy I got it from was going to have me rebuild it for him,but I have too many projects to do for him.
At least he saved it from the crusher.
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: My GC Coupe

Post by A112H »

Been two years, any word on the progress of this hardtop?
Post Reply