GH Sigma EFI 351 V8
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
dunno yet might sell it
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
how much would ya be after??
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Just need to find an X badge so it can be an SE-X spec sigma [/quote]
This GLX badge came off my PWS, you can have it for the price of postage.
This GLX badge came off my PWS, you can have it for the price of postage.
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: G spec GH
amgis_obrut wrote:
GAY!
So you have spent all that time and money to sort out that Blower, and at the last minute you are bailing on it??
Surley one of our members that does machine work can sort you out with a Snout...
This better be one wicked 302, or you will have simnply added a shit load of weight to the front for nothing
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
man cmon a very mild 302 in a sigma would spank that supercharged thing i was planning
the 4g5x is a very uninspiring thing
the 4g5x is a very uninspiring thing
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: G spec GH
I was just really keen to see what you could do with that blower!!
Was dissappointed you gave it the flick before you got to finish it,
But yeah Capacity will definitely be a head start
BTW if you want to donate that Blower and motor to me ill recieve it haha
Was dissappointed you gave it the flick before you got to finish it,
But yeah Capacity will definitely be a head start
BTW if you want to donate that Blower and motor to me ill recieve it haha
Re: G spec GH
if we are going by donations im first..
brotherly love...
brotherly love...
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
Re: G spec GH
I hope someone continues on with the SC'd 4G54, it would be interesting to hear and see it running.
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
meh i still might do the sc14 thing , dont really know why i bothered with it could have done a clevo conversion for what the blower set up cost
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
well seeing as im going 5 stud on the front i thought i may as well do the rear
So i've decided to fit a 3.45:1 LSD borgy from an EF Ghia, Im shortening the housing in my shed and will have a mate respline the axles
complete conversion should cost under $300 (including the cost of making the jig which i can use again)
as pulled from car
Cleaned housing
Jig i made to keep the diff aligned while welding once its cut down
Basically the bar passes through the diff and the collars go where the center and axle bearings go
So i've decided to fit a 3.45:1 LSD borgy from an EF Ghia, Im shortening the housing in my shed and will have a mate respline the axles
complete conversion should cost under $300 (including the cost of making the jig which i can use again)
as pulled from car
Cleaned housing
Jig i made to keep the diff aligned while welding once its cut down
Basically the bar passes through the diff and the collars go where the center and axle bearings go
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
engine is just about ready to go in
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Here we go, no turning back now
went in fairly easy just had to give the opening of the trans tunnel a tender bashing and a smear of KY and that was it no modding the firewall, cross member or the sump
Plenty of room (kinda), though i'll need to fit a holden 6 water pump to gain an extra 45mm of room in the front
tomorrow i'll whip up some engine mounts, mod the Sigma gearbox mount, and throw the tail shaft in
engine sits about 25mm further back now
went in fairly easy just had to give the opening of the trans tunnel a tender bashing and a smear of KY and that was it no modding the firewall, cross member or the sump
Plenty of room (kinda), though i'll need to fit a holden 6 water pump to gain an extra 45mm of room in the front
tomorrow i'll whip up some engine mounts, mod the Sigma gearbox mount, and throw the tail shaft in
engine sits about 25mm further back now
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
I like how you just sound so blase about just knocking up this and that. I would be doing my head in
Nice work Agmis. Wish I could do half the stuff you can?
Keep up the good work, can't wait to go for a spin in this when it's done
Dave...
Nice work Agmis. Wish I could do half the stuff you can?
Keep up the good work, can't wait to go for a spin in this when it's done
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
- TUFSIG
- Sigma-Galant Police (Global Mod)
- Posts: 3185
- Joined: Mon Mar 16, 2009 10:34 pm
- Location: Melbourne, Vic
Re: G spec GH
nice man looking good , keep it up bro
TUFSIG
Boost Is the Only Way
1984 GK Sigma GSR, 2.6 EFI Turbo
1992 Aus Delivered 3000GT Twin Turbo
1984 GK Sigma GSR Stocka
Boost Is the Only Way
1984 GK Sigma GSR, 2.6 EFI Turbo
1992 Aus Delivered 3000GT Twin Turbo
1984 GK Sigma GSR Stocka
Re: G spec GH
you make it sound so easy baha
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: G spec GH
pretty straight forward so far.
How much room are you going to have around the Tranny to allow for engine movement?
what exhaust manifold are you going to use on the Drivers side bank to clear the Steering box and tuck inside the Chassis rails?
can you use extractors, or stock manifolds?
or will you have to make your own?
will you have plenty of room between top of carb and filter, to bonnet?
It would be good to not have to use a Scoop to keep the sleeper look
How much room are you going to have around the Tranny to allow for engine movement?
what exhaust manifold are you going to use on the Drivers side bank to clear the Steering box and tuck inside the Chassis rails?
can you use extractors, or stock manifolds?
or will you have to make your own?
will you have plenty of room between top of carb and filter, to bonnet?
It would be good to not have to use a Scoop to keep the sleeper look
Re: G spec GH
The bonus about it being a sigma Dan is that the steering box is on the other side of the chassis rail to waht our cars are, so read more room. Hell of alot easier than with a Lancer or a Galant... :SDanTurboLancer wrote:what exhaust manifold are you going to use on the Drivers side bank to clear the Steering box and tuck inside the Chassis rails?
Cheers
The way God intended it.....Chrysler for the win
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
oh yeah plenty of head miles and measurements is what makes the fab work easy75wagon wrote:I like how you just sound so blase about just knocking up this and that. I would be doing my head in
Nice work Agmis. Wish I could do half the stuff you can?
Keep up the good work, can't wait to go for a spin in this when it's done
Dave...
engine looks a little nasty but its a fresh std 302 which is what i need (for now) once its passed i'll fit a nice CD218-52A blue racer cam, i have a 2800rpm stall converter, roller rockers, HEI dizzy and a single plane intake sitting here, should make a nice little street engine
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
dunno about headers yet mateDanTurboLancer wrote:pretty straight forward so far.
How much room are you going to have around the Tranny to allow for engine movement?
what exhaust manifold are you going to use on the Drivers side bank to clear the Steering box and tuck inside the Chassis rails?
can you use extractors, or stock manifolds?
or will you have to make your own?
will you have plenty of room between top of carb and filter, to bonnet?
It would be good to not have to use a Scoop to keep the sleeper look
should be plenty of room for an air cleaner as the std ford one kinda drops down over the carb and yeah plenty of room for the trans
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Its sitting on a lump of wood at the front and the gearbox crossmember
yeah a windsor would be a fair bit easier due to their head design, windsor is still a 90* V its just it has a shorter deck and compact heads that make it look like a tighter V
yeah a windsor would be a fair bit easier due to their head design, windsor is still a 90* V its just it has a shorter deck and compact heads that make it look like a tighter V
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
awesome work man!!
make a couple of sets of engine mounts up while youre at it, i'll buy a set off you for a rainy day
make a couple of sets of engine mounts up while youre at it, i'll buy a set off you for a rainy day
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: G spec GH
i think its time you changed the name of the thread
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Its will always be the G spec
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: G spec GH
amgis_obrut wrote: CD218-52A blue racer cam, i have a 2800rpm stall converter, roller rockers, HEI dizzy and a single plane intake sitting here, should make a nice little street engine
Sounds the goods!
What about fitting the 351 Guts in the 302 Block?
Im sure you thought about it but.
Or reversing the pipes and fit a Snail, but not really a streeter then ;)
Looking good Mick
RE- VR4RETROFIT
The older Windsors are getting pretty hard to come by now arent they?
Unless you could buy a late model Injected motor, in a wrecked Falcon EB plus,
and you can change to Carby...
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Yeah thought about using a 351 crank and 302 rods, might be something for the future, TMD do some 427ci cleveland stroker kits for $2500
Also have a GT42 turbo
I did consider getting an EFI windsor but I already had a clevo
Also have a GT42 turbo
I did consider getting an EFI windsor but I already had a clevo
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
engine and trans is mounted, still needs final welding
Trans mount was simple just needed to add a plate to the sigma crossmember to pick up the ford box, tail shaft is done all i done was use a std length 6 cyl cortina shaft
Didn't bother with the normal style engine mounts and decided to go with an engine plate, this will give me heaps of room for exhaust headers once I cut the sigma mounts off the crossmember
Im hoping to use off the shelf falcon V8 pacemakers
Engine plate is made from 4mm mild steel plate the rubbers and pieces that fit to the chassis rail are the mounts that i cut off the falcon diff
All i did was remove the timing case cover and marked out the holes
engine in its final position, still needs to be tig welded and trimmed into shape
Plenty of room now
Trans mount was simple just needed to add a plate to the sigma crossmember to pick up the ford box, tail shaft is done all i done was use a std length 6 cyl cortina shaft
Didn't bother with the normal style engine mounts and decided to go with an engine plate, this will give me heaps of room for exhaust headers once I cut the sigma mounts off the crossmember
Im hoping to use off the shelf falcon V8 pacemakers
Engine plate is made from 4mm mild steel plate the rubbers and pieces that fit to the chassis rail are the mounts that i cut off the falcon diff
All i did was remove the timing case cover and marked out the holes
engine in its final position, still needs to be tig welded and trimmed into shape
Plenty of room now
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
looks gud
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Just a few more pics for those who care
Drivers side extractors are done still need to finish the passenger side
Engine with factory water pump leaves no room for a radiator, solution was to gut an alloy pump cut it down then weld the hole up and run a davies craig 115 ewp
The other problem was the rocker cover fouled on the brake booster, the cover had already been bashed to get it to kinda fit but it was no way to fix the problem and leaves me no room for roller rockers
Solution was to fit a smaller booster, after lots of looking and measurements I decided to go with a datsun stanza booster as it was the closest to what I needed, and it turns out my mate uses them for hotrods and they work a treat
Still was not a bolt in swap as the bolt pattern was slightly different and the bolt are to short, I had to dismantle both the sigma and stanza booster and remove the long bolts from the sigma unit then cut the one off the stanza booster redrill and fit longer bolts, anyhow with a little stuffing I got there in the end
Need to re route the bake lines
Drivers side extractors are done still need to finish the passenger side
Engine with factory water pump leaves no room for a radiator, solution was to gut an alloy pump cut it down then weld the hole up and run a davies craig 115 ewp
The other problem was the rocker cover fouled on the brake booster, the cover had already been bashed to get it to kinda fit but it was no way to fix the problem and leaves me no room for roller rockers
Solution was to fit a smaller booster, after lots of looking and measurements I decided to go with a datsun stanza booster as it was the closest to what I needed, and it turns out my mate uses them for hotrods and they work a treat
Still was not a bolt in swap as the bolt pattern was slightly different and the bolt are to short, I had to dismantle both the sigma and stanza booster and remove the long bolts from the sigma unit then cut the one off the stanza booster redrill and fit longer bolts, anyhow with a little stuffing I got there in the end
Need to re route the bake lines
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust