GH Sigma EFI 351 V8
Re: G spec GH
so when ya picking me up mick
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
still needs to be engineered, you'll get a ride soon enough
have given it a bit of a tune and taken it for a drive, drives really nice hey can turn the tyres into smoke with ease and stops well feels pretty god on the road
its acceleration makes my turbo sigma feel like its an NA 2.0 towing a loaded car trailer lol
Vid of 2nd start still not timed and carb is out a little but its sorted now
have given it a bit of a tune and taken it for a drive, drives really nice hey can turn the tyres into smoke with ease and stops well feels pretty god on the road
its acceleration makes my turbo sigma feel like its an NA 2.0 towing a loaded car trailer lol
Vid of 2nd start still not timed and carb is out a little but its sorted now
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
sounds filth man how much it cost ya all up????
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
without engineers and rego just under $3000
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
thats mad man sounds filth
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
just a short squirt
3.45 gears make it sound like it revving its head off but i was only just touching it lol
http://www.youtube.com/watch?v=OpmcJH90nj4
3.45 gears make it sound like it revving its head off but i was only just touching it lol
http://www.youtube.com/watch?v=OpmcJH90nj4
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Running a little bit behind but I'm nearly there, engineers are a pita too casual and laid back
Have put a rego spec carb on it but just like the holley it too wont fit under the bonnet so i have had to fit a A9X Torana style reverse cowl scoop (just sitting there for now)
still waiting for the other simmons to come back from Retro Wheels
meh i dunno tho it need to be there so i guess i'll just have to put up with it
++
Have put a rego spec carb on it but just like the holley it too wont fit under the bonnet so i have had to fit a A9X Torana style reverse cowl scoop (just sitting there for now)
still waiting for the other simmons to come back from Retro Wheels
meh i dunno tho it need to be there so i guess i'll just have to put up with it
++
Last edited by amgis_obrut on Tue Sep 21, 2010 6:21 pm, edited 1 time in total.
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: G spec GH
really nice neat job mate, glad to see someone went in a different direction rather than a turbo astron
BUILT NOT BROUGHT BY ALGIE.
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Cheers mate
just looking at the engine pic above lol with all the blue bits like the battery distributor plug leads and the stickers on the air cleaner and just noticed it all kind of goes together never noticed until just now
never intended to get bits the same colour it just went that way lol
just looking at the engine pic above lol with all the blue bits like the battery distributor plug leads and the stickers on the air cleaner and just noticed it all kind of goes together never noticed until just now
never intended to get bits the same colour it just went that way lol
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
Is it just the air-cleaner assembly that the bonnet fouls against? It looks pretty close to closing..
Personally, I'd prefer no scoop but it may look good if painted the same col as the bonnet?
You've done such a great job on that sig- can't wait to see her all finished!
Personally, I'd prefer no scoop but it may look good if painted the same col as the bonnet?
You've done such a great job on that sig- can't wait to see her all finished!
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
ddt wrote:Is it just the air-cleaner assembly that the bonnet fouls against? It looks pretty close to closing..
Personally, I'd prefer no scoop but it may look good if painted the same col as the bonnet?
You've done such a great job on that sig- can't wait to see her all finished!
Cheers
Yeah just the air cleaner but seeing as its part of the engines emissions equipment it needs to be there, once its passed and rego'd i'll be fitting a high rise manifold and a holley carb so it will still poke through the bonnet
Scoop looks cool from the drivers seat though
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
whooo hoooooooooooooo
finally got Simmons back and had some new tyres fitted up gave em a half arsed polish and now the siggy looks sexy
just need to fit scoop, paint bonnet and front lip and give a tidy up then off to engineers (i hope)
Will be looking at an cleveland EFI setup tomorrow may be a start to a turbo clevo
finally got Simmons back and had some new tyres fitted up gave em a half arsed polish and now the siggy looks sexy
just need to fit scoop, paint bonnet and front lip and give a tidy up then off to engineers (i hope)
Will be looking at an cleveland EFI setup tomorrow may be a start to a turbo clevo
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
Surprisingly (to me at least ) this is of my interest
Engineered/registered yet?
Engineered/registered yet?
-Josh.
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
was going to see the engineer today but due to having a little acco in my hiace i had to put it offwebby wrote:Surprisingly (to me at least ) this is of my interest
Engineered/registered yet?
He's happy with what he has seen just needs to do a final inspection and sign it off
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
a couple of sexy parts t go on after the engineers report is done
custom made EFI and some fabricated rocker covers
custom made EFI and some fabricated rocker covers
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
gunna be a beast
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
sigma gets engineered today, hope it passes
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Re: G spec GH
goodluck man, im yet to come out and see it... been busy as ill try come out this week sometime
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
Re: G spec GH
Yeah, good luck Mick.
Be good to see it on the next cruise, I'll have my wagon and my new Lancer hatch there. Just got to get that date sorted.... Any ideas?
Dave...
Be good to see it on the next cruise, I'll have my wagon and my new Lancer hatch there. Just got to get that date sorted.... Any ideas?
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
Well shes all passed
Engineer was very happy with the way it was built, was a little worried at first because the original engineer that i started with has been very sick and was unable to sign it off and the second engineer had never seen the car until today
So its been engineered for an engine / trans conversion, larger wheels and tyres, suspension,brakes,diff swap and bonnet scoop and a few other small things
just need to get a blue slip and rego
Engineer was very happy with the way it was built, was a little worried at first because the original engineer that i started with has been very sick and was unable to sign it off and the second engineer had never seen the car until today
So its been engineered for an engine / trans conversion, larger wheels and tyres, suspension,brakes,diff swap and bonnet scoop and a few other small things
just need to get a blue slip and rego
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
- TUFSIG
- Sigma-Galant Police (Global Mod)
- Posts: 3185
- Joined: Mon Mar 16, 2009 10:34 pm
- Location: Melbourne, Vic
Re: G spec GH
awesome man i only hope TUFSIG is that smmoth to engineer but i dout it lol
TUFSIG
Boost Is the Only Way
1984 GK Sigma GSR, 2.6 EFI Turbo
1992 Aus Delivered 3000GT Twin Turbo
1984 GK Sigma GSR Stocka
Boost Is the Only Way
1984 GK Sigma GSR, 2.6 EFI Turbo
1992 Aus Delivered 3000GT Twin Turbo
1984 GK Sigma GSR Stocka
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
looks mad
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
- 77galantv6
- Posts: 845
- Joined: Mon Mar 23, 2009 8:10 pm
- Location: Newcastle, NSW
Re: G spec GH
looking the goods mate, will have to see how she goes down the quater
'77 Galant V6....
1977 Galant with Commodore V6 conversion.
1977 Galant with Commodore V6 conversion.
Re: G spec GH
Well done buddy, hats off to ya. Been a great thread to follow and one of the rare ones that goes to plan.Awsome work!:thumpsup:
85 GN ,daily driver
86 GN ,resto project .
86 GN ,resto project .
Re: G spec GH
Great to see it all worked out, shame about the bonnet scoop though. I love the wheels and don't mind the two tone paint. Can't wait to see some numbers, wish I could be at the first set of lights you smash the first VN SS with chev badges, lol
Maybe you need Ford badges
Maybe you need Ford badges
- amgis_obrut
- Posts: 1742
- Joined: Wed Mar 18, 2009 6:26 pm
- Location: Orient Point NSW
Re: G spec GH
lol not a chance, though i did measure them up just to seegenius wrote:not a 460 pleeeze!
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust