Page 1 of 1

Newbie sigma form Malaysia

Posted: Sat Jul 18, 2009 5:13 pm
by Dwan
hi,juz call me dwan...i'm from malaysia...juz ride my sigma since 2002...
Image

juz change engine to rb20det from nissan skyline r32 GTS...engine old stock galant turbo too rare here...hope can get some knowledge from this forum about my sigma... :)

Re: Newbie sigma form Malaysia

Posted: Sat Jul 18, 2009 6:13 pm
by psshhhht
welcome mate!
Dang, RB20DET in that? Talk about sleeper, if it wasn't for the pins, you'd never suspect anything until it left you for dead! SWEET!!! :D

Re: Newbie sigma form Malaysia

Posted: Sun Jul 19, 2009 11:19 am
by 75wagon
That thing must really go.
any chance of seeing photos with the bonnet open?

What sort of things do you want to know?
I'm sure someone could help you, but probably not me, I don't know all that much about sigmas.

Sigmas Look good it black. Nice car.

Re: Newbie sigma form Malaysia

Posted: Sun Jul 19, 2009 3:25 pm
by Dwan
Thanx bro psshhhht and 75wagon...this some pic of my engine bay...
Image

before this,use blue colour,but my friend drive my sigma and got accidnet.... :evil:
Image
Image

now juz restore again with black colour...

still thingking,what type of my sigma,someone can expalin me,what the different type of sigma?and,what sigma got LSD axle?

Re: Newbie sigma form Malaysia

Posted: Sun Jul 19, 2009 6:52 pm
by GC75
welcome to the site...

shit ay dont let no one drive ya car!

dunno what type it is, one of the sigma bois will know.

Re: Newbie sigma form Malaysia

Posted: Sun Jul 19, 2009 7:04 pm
by psshhhht
i'm taking a guess at it being a GK.

Dunno about LSD - didn't think any sigmas had them (maybe Galant turbos did?)

would love to see that with a fmic but doesn't look like much room, you might be better of going with a water/air intercooler in that, would be better than that tiny factory core - just a thought :)

Cheers

Re: Newbie sigma form Malaysia

Posted: Sun Jul 19, 2009 9:42 pm
by Dwan
hehe...yup,GC75...after this,no one can drive this car anymore...don't want this happen again...will remind that...

hm,yup...looking for GTR intercooler for front mount intercooler after this...but,my country,need endorsed first coz change engine car need approve from government...my car not endorsed yet :) after can put and looking for front intercooler....

water cooler to rare here bro...looking for that item also...but too expensive here...

for rear absober,there is any suggestion,what type absober can i put?

Re: Newbie sigma form Malaysia

Posted: Tue Jul 21, 2009 5:11 pm
by panda
Welcome Dwan to our forum.

As you can see I'm a fan of the Sigma. Your Sigma shape was manufactured & sold in Australia from 1981 to 1986. Our models were given 2 digit model numbers.
GJ 1981 - 1983
GK 1983 - 1985
GN 1985 - 1986
All had the same basic body shape, just had grill & light variations. Also was available in a wagon.
The biggest difference was that GJ & GK used the Astron I motor, whereas the GN had the Astron II.
As far as LSD's are concerned, they were never ever available with an LSD in Australia, nor does any any LSD fit a Sigma housing, but.................
in Asia, things might be different. If you find some Asian model variations, we in Australia would love to hear about it.
Cheers, panda

Re: Newbie sigma form Malaysia

Posted: Tue Jul 21, 2009 11:23 pm
by Dwan
hm,i see now...that mena waht difference of GJ,GK and GN....thats mean,my sigma is from GJ version right...

about LSD,the part to rare here...3 years try to find it,but still can't find the part...juz got axle with rear disk brake....
another research,someone got it...but not really sure coz not see it on my eye...
also hear that juz take from scorpion axle,not IRS one...and,does LSD from lancer can fit into sigma also?

Re: Newbie sigma form Malaysia

Posted: Wed Jul 22, 2009 4:00 pm
by panda
Dwan wrote:hm,i see now...that mena waht difference of GJ,GK and GN....thats mean,my sigma is from GJ version right...

about LSD,the part to rare here...3 years try to find it,but still can't find the part...juz got axle with rear disk brake....
another research,someone got it...but not really sure coz not see it on my eye...
also hear that juz take from scorpion axle,not IRS one...and,does LSD from lancer can fit into sigma also?
Yes, it seems yours is similar to the Australian GJ model. Ours came with an optional disc brake rear end (solid axle), or standard on the GSR sports pack.
Sorry, but Scorpion axle does not fit GJ Sigma. and NO, the Lancer LSD does not fit either.
Keep on searching.
Cheers.

Re: Newbie sigma form Malaysia

Posted: Wed Jul 22, 2009 10:15 pm
by Dwan
TUFSIG wrote:nice ride man
Thanx dude :D

panda wrote:
Dwan wrote:hm,i see now...that mena waht difference of GJ,GK and GN....thats mean,my sigma is from GJ version right...

about LSD,the part to rare here...3 years try to find it,but still can't find the part...juz got axle with rear disk brake....
another research,someone got it...but not really sure coz not see it on my eye...
also hear that juz take from scorpion axle,not IRS one...and,does LSD from lancer can fit into sigma also?
Yes, it seems yours is similar to the Australian GJ model. Ours came with an optional disc brake rear end (solid axle), or standard on the GSR sports pack.
Sorry, but Scorpion axle does not fit GJ Sigma. and NO, the Lancer LSD does not fit either.
Keep on searching.
Cheers.
waa...sad about that..
hm,how much HORSEPOWER standard axle sigma can handle?coz if not mistake,ae86 axle can't handle the power above 200HP...and standard axle sigma,don't have any pick up but if long distance,we can been faster right?

Re: Newbie sigma form Malaysia

Posted: Thu Jul 23, 2009 11:31 am
by panda
Quite a few on this forum have Sigma's with 200RWHP on standard diffs.
But.......... you can break one with 50HP, or you can have no issues with 200HP, depends on how you abuse your diff. ;)

Re: Newbie sigma form Malaysia

Posted: Thu Jul 23, 2009 3:59 pm
by Dwan
hm,you'r right bro...
in aus,what cc of engine for their sigma yaa?coz at malaysia,sigma juz have 1.6,1.8 and 2.0...but 2.0 not much in my country..here,not much knowledge i can get coz here,people like to play old car like nissan and toyota...

Re: Newbie sigma form Malaysia

Posted: Thu Jul 23, 2009 4:11 pm
by Cottees
In the GH-GN Sigma, we got the 1.6L (4G32) Saturn Engine, as well as the 2.0L (4G52) and 2.6L (4G54) Astron engine.

Re: Newbie sigma form Malaysia

Posted: Wed Aug 05, 2009 4:26 pm
by Dwan
waa....2.6L??in malasia,don't have this engine...sad...

em,forgot to ask...what max of rim can plug in to this sigma ya??can or not if want to put 18'' rim or need to put spacer?