New Here But !5yr Vet Owning a Conquest TSI
Posted: Mon Dec 14, 2015 2:03 pm
WHen I was 17yr old I was detailing cars at a chrysler dealership when an older lady traded in her 1988 chrysler conquest tsi (Mitsubishi Starion ESI-R). It had a mere 36,xxxMI on it. I scooped it up quickly not even knowing how to change the oil or even what a turbo was. Next thing you know I am a fanatical about these cars.
15years later i still own the car, it looks kinda rough on the outside but she runs awesome with the all factory bottom end - I did a full MPI conversion and run a megasquirt ecu. I still run the stock factory pistons that somehow have not blow up on me after 142,xxxMI now. On the dyno I put down 380HP to the wheels and 421ft/lb torque.
The turbo is a custom comp turbo that has a 60mm compressor wheel and a 62mm turbine wheel. Its a true T4 with a tubular manifold and 3" exhaust.
Here is my build thread;
http://www.sqperformance.com/forum/index.php?topic=74.0
15years later i still own the car, it looks kinda rough on the outside but she runs awesome with the all factory bottom end - I did a full MPI conversion and run a megasquirt ecu. I still run the stock factory pistons that somehow have not blow up on me after 142,xxxMI now. On the dyno I put down 380HP to the wheels and 421ft/lb torque.
The turbo is a custom comp turbo that has a 60mm compressor wheel and a 62mm turbine wheel. Its a true T4 with a tubular manifold and 3" exhaust.
Here is my build thread;
http://www.sqperformance.com/forum/index.php?topic=74.0