Removing GH ign control unit

This section is for talk about anything to do with electrics, audio, lighting, etc.
Post Reply
User avatar
amgis_obrut
Posts: 1742
Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW

Removing GH ign control unit

Post by amgis_obrut »

Anyone know whats involved in removing/bypassing the ignition control unit in a GH sigma so it can be used with a points distributor
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Sigmaman
Posts: 39
Joined: Mon Jul 05, 2010 1:50 pm
Location: NSW NorthCoast

Re: Removing GH ign control unit

Post by Sigmaman »

Just out of curiousity, why are you doing away with elec. ignition? As for bypassing it, I would have thought it was a simple procedure of finding a pos. wire feeding the module when the key is on the on/start of the key, and ran that to your coil? Could be wrong, as I've been known to.
To say that social direction is not a product of belief is to say that
there is no intelligence. But that itself is not intelligent. You
cannot intelligently claim that there is no intelligence.
User avatar
amgis_obrut
Posts: 1742
Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW

Re: Removing GH ign control unit

Post by amgis_obrut »

Just doing away with the factory sigma electronic system, new system has the control unit and coil in the distributor
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Post Reply