Sigma-galant.com

so i have aquired an electronic dizzy for my 4g32 with 4g54 dizzy guts..

do i have to use the sigma control unit or can i get a betterone to suit witout moving onto micro computer control ignition..??

sure its 4g54 guts? it cood be nimbus 32b or 4g37?

no idea, but it looks identical to the one in the siggy manual

Post a pic up of the internals shuggy, if it is what I am thinking of then it is inductor type and you should be able to use a standard Sigma/magna Bocsh ignition module where you mount it to the dizzy or run the two wires from the dizzy to the module then from module to the coil.

Pic will help.

Cheers

Righto,

this is hall effect so will not work with the later module, you will need the GE/H module that is on the passenger inner gaurd, failing that look in a early nimbus. wire it up should be all good to go.

Cheers

cheers mate, the GE in my back yard had a 2L il see if it has one..

thanks a lot

you need one of these set ups shuggy..

isnt that basically what ive got?

whats the dif?

yeah, mine has the module inside it though.. just a newer design i believe, and i found a transistor ignitor that gives maximum spark at all times, plus its a GT40RT race coil..