1st GEN EFI FINAL WIRING
1st GEN EFI FINAL WIRING
hey all
the efi wiring diagrams are hopeless... can someone help me with my wires?
i have 5 wires left over, my pump relay isnt wired to my fuel pump yet... and no power/ignition/start wires are hooked up..
its tn/m/p efi....
i have 2 red wires, a brown/yellow wire, a brown wire and a yellow/white wire any ideas which wires are which?
i think the yellow/white is for the speed sensor? i dont think i have one of those
brown/yellow to No.5 20a secondary fusible link? im guessing that means constant +12v?
apparantly the wire from the relay to the pump is supposed to be black/white? i dont have one of those in the bundle of wires the P.O. left intact on the loom..
i see two red wires on the diagram... but they only go to the afm/pump relay...
the only 2 browns on the diagram go to the fuel solenoid or the motor position sensor...
cheers,
rob
p.s. can anyone identify the wires using the pinout rather than the colours? that would be so freaking cool... make it a hell of alot easier to make your own loom too!!
the efi wiring diagrams are hopeless... can someone help me with my wires?
i have 5 wires left over, my pump relay isnt wired to my fuel pump yet... and no power/ignition/start wires are hooked up..
its tn/m/p efi....
i have 2 red wires, a brown/yellow wire, a brown wire and a yellow/white wire any ideas which wires are which?
i think the yellow/white is for the speed sensor? i dont think i have one of those
brown/yellow to No.5 20a secondary fusible link? im guessing that means constant +12v?
apparantly the wire from the relay to the pump is supposed to be black/white? i dont have one of those in the bundle of wires the P.O. left intact on the loom..
i see two red wires on the diagram... but they only go to the afm/pump relay...
the only 2 browns on the diagram go to the fuel solenoid or the motor position sensor...
cheers,
rob
p.s. can anyone identify the wires using the pinout rather than the colours? that would be so freaking cool... make it a hell of alot easier to make your own loom too!!
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: 1st GEN EFI FINAL WIRING
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: 1st GEN EFI FINAL WIRING
that file seems corrupted for me or something? its not coming up with the info for the 16 pin connector.. from the info i can see its what i want though... could you possibly convert it to a different format for me?
cheers,
rob
cheers,
rob
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: 1st GEN EFI FINAL WIRING
talk to joe vanderhelm he knows the magna wiring looms well.
BUILT NOT BROUGHT BY ALGIE.
Re: 1st GEN EFI FINAL WIRING
how do i find this joe vanderhelm?
cheers,
rob
cheers,
rob
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: 1st GEN EFI FINAL WIRING
he is a good mate of mine, is right into galants. umm ill ask him for ya. works at specialist car center
BUILT NOT BROUGHT BY ALGIE.
Re: 1st GEN EFI FINAL WIRING
cool, thanks heaps
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: 1st GEN EFI FINAL WIRING
This is for a TN Magna, have wired 2 cars now, so it is accurate.rob020 wrote:that file seems corrupted for me or something? its not coming up with the info for the 16 pin connector.. from the info i can see its what i want though... could you possibly convert it to a different format for me?
cheers,
rob
http://home.exetel.com.au/gaz914net/Tec ... _24pin.pdf
http://home.exetel.com.au/gaz914net/Tec ... _13pin.pdf
http://home.exetel.com.au/gaz914net/Tec ... _relay.pdf
http://home.exetel.com.au/gaz914net/Tec ... _plugs.pdf
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: 1st GEN EFI FINAL WIRING
excellent... why isnt that stickied?? thats the kind of shit id put on the first page
thanks HEAPS,
rob
thanks HEAPS,
rob
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: 1st GEN EFI FINAL WIRING
hope this helps someone:
ignore the colours and use it with the pinouts above
ignore the colours and use it with the pinouts above
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: 1st GEN EFI FINAL WIRING
should i keep the purge and fuel solenoids? i was thinking of getting rid of the purge solenoid... and i read that the fuel solenoid only raises the fuel pressure for warm starts..
who does what?
cheers,
rob
who does what?
cheers,
rob
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out
Re: 1st GEN EFI FINAL WIRING
Why leave the fuel solenoid off? If it helps starting when hot - all good, if not - who cares...rob020 wrote:should i keep the purge and fuel solenoids? i was thinking of getting rid of the purge solenoid... and i read that the fuel solenoid only raises the fuel pressure for warm starts..
who does what?
cheers,
rob
Purge solenoid is a bit the same. It only purges the charcoal canister when engine revs are high and vacuum is high (ie lift off throttle), so has no real effect on driving, so just have it there.
cheers
Gaz
Race car '72 GA Galant - aka Morgan (here now!)
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Road car '73 GB Galant - completely stock and original
2nd car '80 LC Lancer Hatch - 4G54 EFI
Re: 1st GEN EFI FINAL WIRING
thanks,
its just i was making my own loom, and the previous owner removed them from the loom they supplied,
guess ill just leave em be
cheers,
rob
its just i was making my own loom, and the previous owner removed them from the loom they supplied,
guess ill just leave em be
cheers,
rob
"launching missiles? who do they think i am? iraq? where would i get a missile from?" "that means rocks too dumbaass" "oh"
conversation recently overheard at police station after big night out
conversation recently overheard at police station after big night out