xf faclon idle motor?????
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
xf faclon idle motor?????
hi guys im using a xf throttle body on my efi 2.6, been told i need a xf falcon idle motor??? is this the correct term to describle it? anyone have one laying around? and how do i pulse it to get it to idle. im pretty sure it just creates a air lear between the plenum and berfore the throttle plate?
BUILT NOT BROUGHT BY ALGIE.
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: xf faclon idle motor?????
How did you go with this mate?
Is it an Idle Motor,
Or idle up Solanoid??
Is it an Idle Motor,
Or idle up Solanoid??
-
- Posts: 1689
- Joined: Sun Mar 22, 2009 4:12 pm
- Location: Sydney
Re: xf faclon idle motor?????
Or an ISC "idle speed controller"DanTurboLancer wrote:Is it an Idle Motor,
Or idle up Solanoid??
The ISC and/or Idle motor are just stepper motors (either 4 or 6 pin connectors usually) that can finely adjust the idle airflow
but
the idle solenoid (2 pin connector) is either on or off
I know the EA Falcon's have a solenoid and I'd expect the XD's have the same.
Cheers.
Re: xf faclon idle motor?????
the falcon idle control solenoid is a ON/OFF air bypass.
its not adjustable and cant be used with PWM ecus AFAIK.
ive got one on mine and it raises idle to around 2000rpm when warm, so i made a new gasket for it with a smaller hole in it which makes it manageable.
its not adjustable and cant be used with PWM ecus AFAIK.
ive got one on mine and it raises idle to around 2000rpm when warm, so i made a new gasket for it with a smaller hole in it which makes it manageable.
Insert witty one liner here -->