Page 1 of 1
what ohm ballst resistor to use
Posted: Wed Jan 29, 2014 11:11 pm
by jack1781
what ohms reading does a gh sigma 1980 2.0 4cly need?
think it is a 0.5-5.0
can anyone confirm?
Re: what ohm ballst resistor to use
Posted: Thu Jan 30, 2014 5:50 pm
by 84GKSIG
Hello there
.85 and 0.4 are the values your looking for
also used in the GJ
Re: what ohm ballst resistor to use
Posted: Thu Jan 30, 2014 9:13 pm
by jack1781
brilliant.
this is useful cose your in SA aswell, where is best to pick up a new one?
Re: what ohm ballst resistor to use
Posted: Thu Jan 30, 2014 11:06 pm
by 84GKSIG
not sure these days where you could go to get a new one, no harm in sourcing a second hand one from a wrecker or pulling one your self from u-pull it. i cant be of much help there with that one sadly. id say try asking an auto electrician but i can tell you now it wont be cheap.
Re: what ohm ballst resistor to use
Posted: Fri Jan 31, 2014 12:09 am
by Jordan1249
idk if you guys have them in SA but here in Sydney we have a plaace called rare spares got mine for like 5 bucks brand new try ebay as well
Re: what ohm ballst resistor to use
Posted: Tue Feb 04, 2014 1:53 am
by jack1781
no worries, realised i have an electric dizzy, no need for a ballast, just need to stick one in to complete the circuit.
yeh thought they would be anything from 5- 20 bucks. not really a pricey part
cheers
Re: what ohm ballst resistor to use
Posted: Fri Feb 07, 2014 7:42 pm
by amgis_obrut
if you don't need the resistor then just join the black yellow and black white wires