Brakes upgrade for GE sigma
Brakes upgrade for GE sigma
i need to upgrade front and rear brakes in my GE, was just wondering if anyone else has already done this, any straight swaps i could do?
Re: Brakes upgrade for GE sigma
Complete front strut from a GH Sigma along with a complete disc brake diff from a GH Sigma and the master cylinder to match.
2* 73 A53 16L Dodge Colt (Plymouth Cricket), 2* 73 GB Galant Sedan's, 1* 74 GB Galant Sedan, 1* 76 VK Valiant Regal,
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE
-
- Posts: 1689
- Joined: Sun Mar 22, 2009 4:12 pm
- Location: Sydney
Re: Brakes upgrade for GE sigma
Grab a GH Scorp diff (complete with arms and handbrake cable) and then grab a set of rear calipers and rotors off a starion. They will bolt straight on.
The scorpion and starion rotors are the same diameter but the Starion rotors are vented..
While you are there, grab the starion front struts (complete with brakes, rotors, control arms etc..) and now you will have a set of larger and vented front brakes..
Cheers.
The scorpion and starion rotors are the same diameter but the Starion rotors are vented..
While you are there, grab the starion front struts (complete with brakes, rotors, control arms etc..) and now you will have a set of larger and vented front brakes..
Cheers.
-
- Sigma-Galant Police (Global Mod)
- Posts: 2119
- Joined: Sat Oct 22, 2011 6:48 am
- Location: melbourne
Re: Brakes upgrade for GE sigma
Hoppers Stoppers also do a kit for the kit....if you're keen to go THAT far with them.....they use flcon twin piston calipers and 298m rotors....drilled to the PCD of you choice
Built with pride, Driven in anger
Re: Brakes upgrade for GE sigma
NOTE: GE had 13" rim's, upgrading the breaks you will have to go upto 14" rim's to clear the break setup of a GH or Starion.
2* 73 A53 16L Dodge Colt (Plymouth Cricket), 2* 73 GB Galant Sedan's, 1* 74 GB Galant Sedan, 1* 76 VK Valiant Regal,
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE
1* 79 GE SE Sigma Sedan, 1* 81 GH Sigma PWS, 1* 84 GK Sigma SE, 1* 85 GK Sigma GL - Replacing the 84 GK SE, 1* 91 GTO - FOR SALE
- cheaterparts
- Posts: 660
- Joined: Tue Mar 17, 2009 9:06 pm
- Location: Cranbourne Vic
Re: Brakes upgrade for GE sigma
this is basicly what is on my track car - except I use a H190 datson diff with welded on bracket to fit the staz rear calipersSuperscan811 wrote:Grab a GH Scorp diff (complete with arms and handbrake cable) and then grab a set of rear calipers and rotors off a starion. They will bolt straight on.
The scorpion and starion rotors are the same diameter but the Starion rotors are vented..
While you are there, grab the starion front struts (complete with brakes, rotors, control arms etc..) and now you will have a set of larger and vented front brakes..
Cheers.
the only bad thing these days is finding good cheap pads
I had been using Porterfeild carbon kevlars pads but they arn't a bargin
Note the staz brakes will fit under most aftermarket 13" mags - I have mine running under 13 x 7 minilights and although they run close there is clearanceGB_BB4C wrote:NOTE: GE had 13" rim's, upgrading the breaks you will have to go upto 14" rim's to clear the break setup of a GH or Starion.
cheater
Re: Brakes upgrade for GE sigma
thanks for all the tips guys, ive got 15s on it, so it should be fine to fit on