ok so i got myself a new pair of lower ball joints and i have removed one from one side, that took me 3 hours or so..
how the hell do i get the new one back in??
ive tried making a puller by using a piece of pipe and place and screing the top of the ball joint up to it but it just pulls the plate toward the arm instead of of pulling the joint up...
just doesnt seem like it will fit
is there a puller i can buy or rent to do this??
lower ball joints
lower ball joints
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
Re: lower ball joints
You need a press, it needs a few tonnes of pressure to get them in.
- 81GL
- Sigma-Galant Police (Global Mod)
- Posts: 912
- Joined: Mon Mar 23, 2009 7:27 am
- Location: Mildura Sunraysia Vic
Re: lower ball joints
As above...
The last thing you want to do is put one in not square!
Last time i did em cost me $20 to get the pair pressed in
The last thing you want to do is put one in not square!
Last time i did em cost me $20 to get the pair pressed in
Old school Mitsu's, its not a hobby; it's a life style.
Re: lower ball joints
found out my mate has a 20 tonne press hahah so did it today, it took over 6 tonne of pressure to do
thanks fellas
thanks fellas
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8