Scorpion Adjustable lower control arms
Posted: Fri Feb 19, 2016 1:42 pm
Currently making up a set of adjustable LCA for my scorpion.
24mm high tensile thread rod with a 12mm hiem joint tapped into the end. thread block welded to original arm (therefore off the shelf parts)
Still working on them but when there done Im hoping the help a fair bit for khanacross/sprints etc.
24mm high tensile thread rod with a 12mm hiem joint tapped into the end. thread block welded to original arm (therefore off the shelf parts)
Still working on them but when there done Im hoping the help a fair bit for khanacross/sprints etc.