this is for morpsi91, I don't know if its been mentioned here before
this kit mounts the GM auto transmissions to the 4G63 in either the wide or narrow block version, it uses a Toyota starter from the 22RE engine and a 153 tooth GM flexplate readily available from any speed shop, they come with the coupler and the adapter plate
My first plate were 3/4 inch thick, the new plate will be closer to 1 inch
this is all cut to 2% oversize for the shrink that will take place during casting
I got the one piece GM adaptors worked out
these are the first heat treated couplers
I added some side mounting motor mounts in my latest designs, for guys that wanted a mid plate
4G63 GM TH350/400 auto trans
-
- Posts: 48
- Joined: Mon Sep 13, 2010 12:40 am
- Location: Toledo,Ohio
- Contact:
Re: 4G63 GM TH350/400 auto trans
Its sold bill i will trial it for u no problem just give me your pice and postage and what i have to go get thanks bill
-
- Posts: 48
- Joined: Mon Sep 13, 2010 12:40 am
- Location: Toledo,Ohio
- Contact:
Re: 4G63 GM TH350/400 auto trans
I been selling these for years, many happy customers make over 800 hp with this unit, look up 'frankindart' or andy fangman on U tube to see it work