4g63t on to autogearbox

[vr4galant]

Hello
Just wondering if a standard gd galant gearbox which is automactic bolt up to a 4g63t engine. What modification would be needed?

[GLANT]

a new autogearbox every week!! lol!!

[vr4galant]

I know it wouldnt be strong but would it bolt up?

[geezer101]

Borg boxes aren't great. Maybe the 904t out of scorpions would be better (still don't know if they'd like a ton of horses pushed through them without being beefed up...) As for it bolting up, don't know about that either!

[dvsfin]

904 out of a scorpion is narrow block patterm so yes it would bolt up to an early series 4g63 (evo 1-3, vr4 or rvr)

[geezer101]

...had a feeling- scorpion engines being jap spec and '63t being the same deal.

[77galantv6]

http://www.sigma-galant.com/viewtopic.php?f=46&t=2619

[geezer101]

And there's your answer! Nice. I liked the N/A 2L- 904 combo I had in my GD wagon. Good all round performance, nice and strong.

[vr4galant]

might give it a go see what happens

[count]

Borg boxes aren't great. Maybe the 904t out of scorpions would be better (still don't know if they'd like a ton of horses pushed through them without being beefed up...) As for it bolting up, don't know about that either!

sweet i got a gj scorp with the baby torqueflite so i get a evo3 engine and no mods its bolts up ???? is that correct
what about a later EVO say 6,7,8 etc

please help

[mic_77]

The money you are going to spend to get that box to survive is not worth it a C4 conversion makes a lot more sense or go for Bill Hinchner's powerglide adaptor if you have the room for the chev style box. Good luck.

cheers Mic

[count]

Also i might just go 1uz aka lexus v8 with the stock auto
Can get the whole package for 1000

[geezer101]

I've seen this conversion done in an import tuner magazine. Was fitted into a Treuno/Sprinter. The work was immaculate- to the point you'd think it was a factory install.