Alloy auto narrow block bellhousings

This section is for talk about anything to do with transmission or drivetrain.
Post Reply
User avatar
SIR
Posts: 70
Joined: Wed Mar 25, 2009 2:11 pm
Location: Adelaide

Alloy auto narrow block bellhousings

Post by SIR »

Hi guys i have a bellhousing to suit an auto behind a narrow block which i was going to use for a t5 manual conversion but it is made of steel and too heavy.

Has anyone come across an alloy one? I dont have a picture of this one but on the trans side the mounting holes are in a nice circular pattern concentric to the input shaft, if that makes sense.
mstrrab1992
Posts: 548
Joined: Wed Sep 21, 2011 1:13 pm
Location: Sunshine coast ATM

Re: Alloy auto narrow block bellhousings

Post by mstrrab1992 »

Not sure for what motor you need but a guy named bill hincher or hinchner or something makes them
All Animals to the Crow: Your not a zoo animal!
Monkey to crow:your just jealous cause noone says "mummy mummy i want to see a crow!"
User avatar
stealth
Posts: 1038
Joined: Wed Mar 18, 2009 3:59 pm
Location: Gold coast, QLD

Re: Alloy auto narrow block bellhousings

Post by stealth »

But if you still want to do you own , I have a alloy bellhousing narrow block to borg warner box , would be good for a cut and shut
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
User avatar
SIR
Posts: 70
Joined: Wed Mar 25, 2009 2:11 pm
Location: Adelaide

Re: Alloy auto narrow block bellhousings

Post by SIR »

Stealth does it look something like this but alloy?
Image
User avatar
stealth
Posts: 1038
Joined: Wed Mar 18, 2009 3:59 pm
Location: Gold coast, QLD

Re: Alloy auto narrow block bellhousings

Post by stealth »

No thats a auto bellhousing
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Post Reply