Sigma-galant.com

So my plans ATM are to chuck a 4g54 into my lancer .

I have a narrow 4g54 all ready to pop straight in. One thing I'm not sure about it because some posts I read say one things others say other things.

If what I've read is correct. To bolt the narrow 4g54 nothing is required to fit it to a km119? I was made aware one of the bolt holes won't line up, but some people don't worry about it? So I don't need to change clutch or flywheel or anything etc?

i just did a 4g63 DOHC to a km119. You will need a narrow 4g52 flywheel and clutch.

Might be hard to get a 4g52 flywheel..

I don't know for sure..but wouldn't a 4g54 Magna have the same flywheel as a 4g52, both being narrow block. Someone will know.

Apparently not , so I was told
But I would like to know why though as I thought the same thing
Cheers stealth

Think it's got something to do with it being FWD?

I just used the search function
And found that AH112 claims that a magna flywheel definitely can be used !
All narrow astrons use the same flywheel
Apparently!
Cheers stealth

I got one lined up now. So its all good. But good to know for future references.

btw the factory lancer starter motor will be no good. you will need the sigma starter. I bought a brand new one from repco for 140

I have about 5 sigmas full of parts. Should have a good one kicking around.