Jap 5 Speed Rear Seal

This section is for talk about anything to do with transmission or drivetrain.
Post Reply
smithdavidjames
Posts: 96
Joined: Mon Aug 31, 2009 12:08 pm
Location: Blue Mountains

Jap 5 Speed Rear Seal

Post by smithdavidjames »

HI Guys,

Having trouble tracking down a rear oil seal for my narrow Jap 5 speed. Just want to make sure I get right seal Kelpro have no listing and the closest I can see is P/N 97102 but this is listed for GH up and I think they went Borg Warner?.?..
On ebay there is another oil seal listed P/N 400799N but again juat want to make sure get right one as my car is daily drive and don't want the get stuck because of parts.

Anyone know or have lead on which is right or where I can source...

Thanks In Advance

David
User avatar
Sigmaproject
Posts: 1143
Joined: Sun Mar 22, 2009 7:11 am
Location: Maitland NSW

Re: Jap 5 Speed Rear Seal

Post by Sigmaproject »

Try 999auto. 0297096020 I think they are in the Bankstown area. But they do post.
User avatar
stealth
Posts: 1038
Joined: Wed Mar 18, 2009 3:59 pm
Location: Gold coast, QLD

Re: Jap 5 Speed Rear Seal

Post by stealth »

The part number recently changed :facepalm:
Speak to fridgegb, he went through the same drama
Cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
User avatar
fridgeGB
Posts: 166
Joined: Sat Sep 05, 2009 12:21 pm
Location: Gold Coast

Re: Jap 5 Speed Rear Seal

Post by fridgeGB »

Hey David.
The seal size is 42x55x8. You will be able to get it from pretty much any bearing shop (eg allied bearings) if you have no luck at an auto shop
User avatar
fridgeGB
Posts: 166
Joined: Sat Sep 05, 2009 12:21 pm
Location: Gold Coast

Re: Jap 5 Speed Rear Seal

Post by fridgeGB »

Hang on a sec I've stitched you up there lol :facepalm: that is the GB galant diff/axle seal size lol

5 speed narrow block slip yoke seal size is 32x48x8.
leen
Posts: 46
Joined: Fri Mar 27, 2009 9:00 pm
Location: ADELAIDE

Re: Jap 5 Speed Rear Seal

Post by leen »

Do you have the size of the front seal?
Post Reply