Metal shim head gasket for 2.6
Metal shim head gasket for 2.6
Hi all just after a Metal shim head gasket for my 2.6. Can any one tell me where I can get one of the shelf or have one made must be able to handle up to 30psi spikes mostly will be at 25psi. Adelaide or Melbourne Ok.
Origanal GH Turbo Sigma No. 233.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Re: Metal shim head gasket for 2.6
Cometic will not make them we have tried there is another alternative that is proven to over 700hp@wheels on 40psi but you will need to get intouch with Paul Testa to find out what he uses.
cheers Mic
cheers Mic
- Sigmaproject
- Posts: 1143
- Joined: Sun Mar 22, 2009 7:11 am
- Location: Maitland NSW
Re: Metal shim head gasket for 2.6
I have copper head gaskit with O ringed block. Ran it at 18lb for a while. No problems.
What static compression ratio are you using to run 30lb boost
What static compression ratio are you using to run 30lb boost
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: Metal shim head gasket for 2.6
Thanks for the info. TUFSIG the car is at the paint shop with my race car being painted will look good when finished. Will drive over to Melbourne at Xmas and show you. Will be putting the old race engine in as I'm building a new one for the race car. Thats why I'm asking about the gasket.
Origanal GH Turbo Sigma No. 233.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Re: Metal shim head gasket for 2.6
Sigmaproject I run 8.0:1 but it only spikes to 30psi on gear change in 4th and 5th only. As for the copper gasket i don't like them as i have tried them on other cars with no luck and yes with O ringed block.Sigmaproject wrote:I have copper head gaskit with O ringed block. Ran it at 18lb for a while. No problems.
What static compression ratio are you using to run 30lb boost
Mic Would you know how i can get in touch with Paul???mic_77 wrote:Cometic will not make them we have tried there is another alternative that is proven to over 700hp@wheels on 40psi but you will need to get intouch with Paul Testa to find out what he uses.
cheers Mic
Origanal GH Turbo Sigma No. 233.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Re: Metal shim head gasket for 2.6
i ran a cheap std headgasket at 20psi for about 10,000kms worth of driving, had no issues with it.
30psi is a litle different though, but you can always try it. im using a monotorque branded gasket for the new engine which im chasing 300rwkw from.
if it fails ill let you know. but its still in the build so it wont be on the road for a month or 3 at this stage
30psi is a litle different though, but you can always try it. im using a monotorque branded gasket for the new engine which im chasing 300rwkw from.
if it fails ill let you know. but its still in the build so it wont be on the road for a month or 3 at this stage
Insert witty one liner here -->
Re: Metal shim head gasket for 2.6
The specs on the engine are STD 2.6 crank out of Pajero which come nitrited as standard, standard rods with dished hypertec pistons, M8 head standard with handmade stainless exhaust with a t4 turbo with a .86 housing TS magna inlet modified with 550cc injectors and Motec computer to control it. In the class that it runs in it has a 36mm restictor in front of the turbo and power is only 350hp but it has heaps of torque 420 foot pounds.TUFSIG wrote:awesomeStigma wrote:Thanks for the info. TUFSIG the car is at the paint shop with my race car being painted will look good when finished. Will drive over to Melbourne at Xmas and show you. Will be putting the old race engine in as I'm building a new one for the race car. Thats why I'm asking about the gasket.
look forward to seeing it man
whats the specs ont he race motor ?
Origanal GH Turbo Sigma No. 233.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.
Origanal GH Turbo Sigma No. 295.
GH Turbo Sigma Race Car.
Standard GH Road Car.
1985 TRX Bluebird VG30 Quad Cam Turbo.